Fenge ED-S48101WB

Fenge Height Adjustable Standing Desk User Manual

Model: ED-S48101WB

1. المقدمة

Thank you for choosing the Fenge Height Adjustable Standing Desk. This manual provides detailed instructions for the assembly, operation, and maintenance of your new electric standing desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. This desk is designed to promote a healthier work environment by allowing you to easily switch between sitting and standing positions, reducing the risks associated with prolonged sitting.

Fenge Height Adjustable Standing Desk with laptop and monitor

Image: The Fenge Height Adjustable Standing Desk, showcasing its sleek design with a laptop, monitor, and desk accessories.

2. معلومات السلامة

  • تأكد من تثبيت جميع المكونات بشكل آمن قبل الاستخدام.
  • احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن المكتب أثناء التشغيل لمنع الإصابة.
  • لا تُحمّل المكتب فوق طاقته. الحد الأقصى للوزن المسموح به هو ١٢٠ كجم (٢٦٤ رطلاً).
  • تجنب وضع السوائل مباشرة على لوحة التحكم أو مكونات المحرك.
  • لا تحاول تفكيك أو إصلاح المحرك أو نظام التحكم بنفسك. اتصل بخدمة دعم العملاء للحصول على المساعدة.
  • تأكد من عدم وجود أي عوائق أعلى أو أسفل المكتب عند ضبط ارتفاعه.

3. محتويات العبوة

Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Fenge customer support.

  • Desktop (43"L x 24"W)
  • أرجل مكتب (2)
  • وسادات القدم (2)
  • دعامة العارضة/الإطار
  • صندوق التحكم
  • Handset/Control Panel
  • محول الطاقة والكابل
  • جميع البراغي والأدوات اللازمة (مفتاح ألين، مفك براغي)

4. تعليمات التجميع

Follow these steps carefully to assemble your Fenge Height Adjustable Standing Desk. It is recommended to have two people for assembly.

  1. فك وتنظيم: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Identify all parts against the package contents list.
  2. قم بتثبيت وسادات القدم على الساقين: Secure the foot pads to the bottom of each desk leg using the provided screws.
  3. قم بتجميع الإطار: Connect the two desk legs with the crossbar/frame support. Ensure all screws are tightened securely.
  4. صندوق التحكم في التركيب: Attach the control box to the designated area on the frame, typically under the desktop.
  5. إرفاق سطح المكتب: Carefully place the desktop upside down on your soft surface. Align the assembled frame with the pre-drilled holes on the desktop. Secure the frame to the desktop using the provided screws.
  6. توصيل الأسلاك: Connect the motor cables from the legs to the control box. Connect the handset/control panel cable to the control box. Finally, connect the power adapter to the control box.
  7. ضع المكتب في مكانه: With assistance, carefully flip the desk upright and place it in its desired location. Ensure the power cable is not pinched.
Diagram showing Fenge desk dimensions and weight capacity

Image: Technical diagram illustrating the Fenge desk's dimensions (43.3"W x 23.6"D, height range 28.9" to 48.6") and its maximum weight capacity of 176 lbs (80 kg).

5. تعليمات التشغيل

Your Fenge Electric Standing Desk features an intuitive control panel for easy height adjustment and memory settings.

5.1. ضبط الارتفاع الأساسي

  • اضغط على أعلى (▲) زر لرفع المكتب.
  • اضغط على لأسفل (▼) زر لخفض المكتب.
  • Release the button when the desk reaches your desired height. The LED display will show the current height.

5.2. إعدادات الذاكرة المسبقة

يتيح لك المكتب حفظ ما يصل إلى أربعة إعدادات ارتفاع مفضلة لإجراء تعديلات سريعة.

Fenge desk control panel with LED display and buttons for height adjustment and memory presets

Image: Close-up of the Fenge desk's control panel, showing the LED display, up/down buttons, and four memory preset buttons (1, 2, 3, 4) along with a 'Set' button.

  1. تعيين موضع الذاكرة:
    1. اضبط ارتفاع المكتب حسب رغبتك باستخدام أزرار الرفع/الخفض.
    2. اضغط على "S" (Set) زر. ستظهر شاشة LED "S-".
    3. في غضون 5 ثوانٍ، اضغط على أحد أزرار الذاكرة (1، 2، 3، أو 4ستعرض الشاشة الرقم المقابل، مما يشير إلى أنه تم حفظ الارتفاع.
  2. تذكر موقف الذاكرة:
    • ما عليك سوى الضغط على زر الذاكرة المطلوبة (1، 2، 3، أو 4).سيتم نقل المكتب تلقائيًا إلى الارتفاع المحفوظ.

6. الصيانة

Regular maintenance ensures the longevity and optimal performance of your Fenge standing desk.

  • تنظيف: امسحي سطح المكتب وأرجله بقطعة قماش ناعمة.amp القماش. تجنب المواد الكيميائية القاسية أو المنظفات الكاشطة.
  • إدارة الكابلات: Periodically check that all cables are securely connected and not tangled or pinched.
  • إحكام المسمار: Every few months, check and tighten any loose screws on the frame and desktop connections.
  • العناية بالمحرك: صُمم المحرك ليعمل دون الحاجة إلى صيانة. لا تقم بتزييت المحرك أو محاولة فتح غلافه.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Fenge standing desk, refer to the common problems and solutions below. If the problem persists, contact customer support.

مشكلةالسبب المحتملحل
المكتب لا يتحرك.تم فصل كابل الطاقة؛ الحمل الزائد؛ ارتفاع درجة حرارة المحرك.تحقق من توصيل الطاقة. خفّف الوزن على المكتب. اترك المحرك ليبرد لمدة ٢٠ دقيقة.
المكتب يتحرك بشكل غير متساوٍ.Loose screws; Uneven weight distribution.Tighten all assembly screws. Redistribute weight evenly on the desktop.
رمز الخطأ معروض على الشاشة.خطأ نظامي محدد.Refer to the specific error code in a more detailed manual (if provided by manufacturer) or contact customer support. Often, unplugging for 10 seconds and plugging back in can reset the system.
يصدر المكتب صوتاً غير معتاد.مكونات مفكوكة؛ عائق.Check for loose screws and tighten. Ensure no objects are interfering with the lifting mechanism.

8. المواصفات

  • ماركة: Fenge
  • رقم الموديل: ED-S48101WB
  • أبعاد سطح المكتب: 43 بوصة (عرض) × 24 بوصة (عمق)
  • مدى الارتفاع: من 28 بوصة (كحد أدنى) إلى 48.6 بوصة (كحد أقصى)
  • قدرة الوزن: 176 رطل (80 كجم)
  • نوع المحرك: Electric, Ultra-Quiet
  • لوحة التحكم: Digital LED display with 4 memory presets
  • مادة: Industrial-grade aluminum alloy frame, particleboard tabletop
  • لون: Brown desktop, Black frame

9. الضمان والدعم

Fenge provides a permanent warranty for this electric computer desk. We are committed to providing high-quality products and service.

If you have any questions, require assistance with assembly, or need troubleshooting support, please do not hesitate to contact our customer service team. We are available 24 hours to assist you.

معلومات الاتصال:

  • Webموقع: Visit the Fenge Store on Amazon
  • بريد إلكتروني: [Please refer to your product packaging or Fenge's official website for direct email support]
  • هاتف: [Please refer to your product packaging or Fenge's official website for direct phone support]

المستندات ذات الصلة - ED-S48101WB

قبلview تعليمات تجميع مكتب الوقوف من سلسلة FENGE FD2-G12C Riser
دليل تجميع خطوة بخطوة لمكتب FENGE FD2-G12C Riser Series القابل للتعديل. يتضمن قائمة شاملة بالأجزاء وتعليمات مفصلة لبناء مساحة عمل مريحة.
قبلview تعليمات تجميع مكتب فينج الكهربائي القابل للوقوف من سلسلة G12D
دليل تجميع شامل لمكتب Fenge G12D الكهربائي القابل للتعديل. توضح هذه الوثيقة بالتفصيل الأجزاء والأدوات والتعليمات خطوة بخطوة اللازمة لتجميع مكتبك القابل للتعديل.
قبلview FENGE G04H208 دليل تركيب حامل شاشة Nova
تعليمات التجميع خطوة بخطوة لحامل شاشة FENGE G04H208 Nova، بما في ذلك قائمة الأجزاء والإرشادات المرئية.
قبلview تعليمات تجميع حامل الشاشة الكبير FENGE G04Y310 Yugen
دليل التثبيت الرسمي لحامل الشاشة الكبير FENGE G04Y310 Yugen. يوفر هذا الدليل تعليمات تجميع مفصلة خطوة بخطوة، وقائمة بالأجزاء، وإرشادات السلامة اللازمة لإعداد حامل الشاشة.
قبلview تعليمات تجميع رف المكتب Fenge FR-SG
دليل شامل لتجميع رف المكتب Fenge FR-SG، مع تفصيل جميع الأجزاء والأجهزة وتعليمات خطوة بخطوة لإعداد سلس.
قبلview دليل تركيب حامل شاشة Flux G04J110 من FENGE
دليل تركيب حامل شاشة FENGE G04J110 Flux. يتضمن خطوات التركيب، وتعريف القطع، وتعليمات الإعداد لضمان ثبات مثالي للشاشة.