PRITECH Rechargeable Callus Remover BCM-1138 Charging Cable User Manual

مقدمة

This manual provides essential information for the safe and effective use of your PRITECH Rechargeable Callus Remover BCM-1138 Charging Cable. Please read this manual thoroughly before use and retain it for future reference.

This product is designed specifically for charging the PRITECH Rechargeable Callus Remover (Model BCM-1138). It is not intended for use with other devices.

المنتج انتهىview

Image 1: The PRITECH Rechargeable Callus Remover Charging Cable (Model HF-V050A1000).

Image 2: The charging cable connected to the PRITECH Rechargeable Callus Remover.

الصورة 3: عن قرب view of the charging cable's connection point to the device.

The PRITECH charging cable, model HF-V050A1000, is a white USB cable designed for specific PRITECH devices. It features a standard USB-A connector on one end and a proprietary connector on the other, compatible with the PRITECH Rechargeable Callus Remover BCM-1138.

Setup and Charging Instructions

Follow these steps to properly charge your PRITECH Rechargeable Callus Remover:

1. Plug the charging cable into a power source: Insert the USB-A end of the charging cable into a compatible USB power adapter (not included) or a USB port on a computer. Ensure the power source provides 5V⋯1A output for optimal charging.
2. Connect the charging cable to the PRITECH Rechargeable Callus Remover: Carefully insert the proprietary connector end of the cable into the charging port of your PRITECH Rechargeable Callus Remover.
3. Check for charging indication: The device typically has an indicator light that illuminates or changes color to show that it is charging. Refer to your callus remover's manual for specific charging indications.
4. افصل بعد الشحن: Once the device is fully charged, disconnect the cable from both the device and the power source.
5. Store the cable safely: Store the charging cable in a dry, cool place, away from direct sunlight and extreme temperatures, to prevent damage.

تحديد

الصيانة والعناية

• تنظيف: Use a soft, dry cloth to wipe the cable clean. Do not use abrasive cleaners or immerse the cable in water.
• تخزين: When not in use, coil the cable loosely and store it in a cool, dry place. Avoid sharp bends or kinks, especially near the connectors, as this can damage the internal wires.
• التعامل: Always grasp the plug when connecting or disconnecting the cable from a power source or device. Do not pull on the cord itself.
• تقتيش: Periodically inspect the cable for any signs of damage, such as frayed wires, exposed insulation, or bent connectors. If damage is found, discontinue use immediately and replace the cable.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your charging cable, consider the following:

• الجهاز لا يشحن:
  • Ensure the cable is securely plugged into both the power source and the callus remover.
  • جرب محول طاقة USB مختلف أو منفذ USB مختلف.
  • تأكد من أن مصدر الطاقة نشط ويقوم بتزويد الطاقة.
  • Check the charging port on your callus remover for any debris or damage.
• الشحن البطيء:
  • Ensure your power adapter provides the recommended 5V⋯1A output. Lower output adapters may charge slower.
  • Avoid using USB hubs or unpowered USB ports, which may not provide sufficient power.
• يبدو أن الكابل تالف:
  • If the cable shows any signs of physical damage (fraying, cuts, bent connectors), discontinue use immediately to prevent electrical hazards. Replace the cable with an official PRITECH replacement.

الضمان والدعم

For warranty information or technical support regarding your PRITECH Rechargeable Callus Remover BCM-1138 Charging Cable, please contact PRITECH customer service. Refer to the original product packaging or the PRITECH official webموقع للحصول على تفاصيل الاتصال.

You can also visit the official PRITECH store on Amazon for more products and support: PRITECH Store