1. المقدمة
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.
Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. معلومات السلامة
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- احرص دائمًا على ارتداء معدات السلامة المناسبة، مثل نظارات السلامة، أثناء التركيب.
- Use only the tools specified in the installation guide.
- احتفظ بالأجزاء الصغيرة بعيدًا عن متناول الأطفال.
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. محتويات العبوة
تأكد من وجود كافة المكونات قبل البدء في التثبيت:
- مجموعة مقابض خارجية
- Interior Accent Lever Assembly
- آلية القفل
- لوحة الإضراب
- براغي التثبيت والمثبتات
- قالب التثبيت (إذا كان متضمنًا)
- المفاتيح (إن وجدت)
4. الإعداد والتثبيت
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 باب التحضير
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 تركيب لوحة الإضراب
- Align the strike plate with the latch bolt on the door frame.
- Mark and chisel out the necessary area for a flush fit, if required.
- Secure the strike plate with the provided screws.
5. تعليمات التشغيل
To operate your Schlage Addison Handleset:
- لقفل: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- لإلغاء القفل: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- للفتح: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. الصيانة
Proper maintenance ensures the longevity and smooth operation of your handleset.
- تنظيف: نظف مجموعة المقابض بانتظام بقطعة قماش ناعمة و...amp القماش. تجنب استخدام المنظفات الكاشطة أو المذيبات أو المواد الكيميائية القاسية، لأنها قد تؤدي إلى إتلاف الطبقة النهائية.
- تشحيم: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- تشديد: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| المفتاح لا يدور بسلاسة | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| لم يُغلق الباب بشكل صحيح | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | مسامير التثبيت فضفاضة | قم بربط جميع براغي التثبيت الظاهرة. |
8. المواصفات
- رقم الموديل: 163604
- ماركة: شلاج
- مادة: معدن
- لون: الساتان النيكل
- ينهي: صقيل
- أسلوب: حديث
- أبعاد المنتج: 16.51 x 20.32 x 52.07 cm (6.5 x 8 x 20.5 inches)
- وزن السلعة: 2.04 كجم (4.5 رطل)
- نوع المقبض: رافعة
- ميزة خاصة: Easy to Install, Patented adjustable bottom thru-bolt
- الشركة المصنعة: Allegion Canada Inc
- بلد المنشأ: المكسيك
9. الضمان والدعم
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webقم بزيارة الموقع أو راجع بطاقة الضمان المرفقة مع المنتج الخاص بك.
لمزيد من المساعدة، يرجى زيارة متجر شلاغ.
