SAMOTECH SM301Z Zigbee Motion Sensor User Manual

1. المقدمة

The SAMOTECH SM301Z is a Zigbee-enabled motion sensor designed to enhance your smart home system. It provides reliable motion detection, enabling automation routines for lighting, security, and other smart devices. This manual provides detailed instructions for setup, operation, and maintenance of your SM301Z motion sensor.

Image 1.1: SAMOTECH SM301Z Zigbee Motion Sensor and its packaging.

2. محتويات العبوة

تأكد من وجود جميع العناصر في الحزمة الخاصة بك:

• 1 x SAMOTECH SM301Z Zigbee Motion Sensor
• 3 بطاريات AAA
• 1 × لاصق للتركيب

3. المواصفات

4. الإعداد والتثبيت

4.1. ملاحظة هامة بشأن التوافق

The SAMOTECH SM301Z is a زيجبي device and requires a compatible Zigbee hub for operation. It is not a Wi-Fi device and cannot connect directly to your Wi-Fi network. Ensure you have a compatible Zigbee hub (e.g., Samotech SM310ZHA Hub, deCONZ, SmartThings, Hubitat Elevation, Home Assistant) before proceeding.

Image 4.1: The SM301Z requires a Zigbee hub and is not Wi-Fi compatible.

4.2. تركيب البطارية

1. افتح الغطاء الخلفي لجهاز استشعار الحركة برفق.
2. Insert the three AAA batteries into the battery compartment, ensuring correct polarity (+/-).
3. أغلق الغطاء الخلفي بإحكام.

4.3. Pairing with Your Zigbee Hub

Follow these general steps to pair your SM301Z sensor with your Zigbee hub. Specific steps may vary slightly depending on your hub's application:

1. تأكد من تشغيل جهاز Zigbee الخاص بك ووضعه في وضع الاقتران (راجع دليل جهاز Zigbee الخاص بك للحصول على تعليمات محددة).
2. On the SM301Z sensor, locate the RESET button (usually a small pinhole button). Press and hold the RESET button for approximately 5 seconds until the LED indicator on the sensor begins to blink. This indicates the sensor is in pairing mode.


الصورة 4.2: مثالample of a pairing mode screen in a smart home application.

3. Within your Zigbee hub's application, initiate the device search or 'add subdevice' function.
4. The hub should discover the SM301Z sensor. Once detected, follow the on-screen prompts in your app to complete the pairing process.

Image 4.3: Confirmation of successful device addition in a smart home application.

4.4. تركيب المستشعر

The SM301Z sensor is designed for wall mounting. Choose a location where motion detection is desired, keeping in mind the 3-meter maximum range.

1. Ensure the mounting surface is clean, dry, and smooth.
2. Peel off the protective film from one side of the provided mounting adhesive.
3. Attach the adhesive firmly to the back of the sensor.
4. Peel off the remaining protective film from the adhesive and press the sensor firmly onto the desired wall location for at least 30 seconds.

Image 4.4: Steps for battery installation and applying the mounting adhesive.

5. تعليمات التشغيل

Once successfully paired and mounted, the SAMOTECH SM301Z motion sensor will detect movement within its 3-meter range and communicate this information to your Zigbee hub.

5.1. كشف الحركة

The sensor uses Passive Infrared (PIR) technology to detect changes in infrared radiation caused by moving objects, such as people. When motion is detected, the sensor sends a signal to your Zigbee hub.

الصورة 5.1: مثالample of motion detection status in a smart home application.

5.2. Creating Smart Routines

Leverage your Zigbee hub's capabilities to create automated routines based on motion detection:

• Lighting Automation: Configure lights to turn on when motion is detected in a room and turn off after a set period of no motion.
• تنبيهات أمنية: Receive notifications on your smartphone if motion is detected when you are away from home.
• توفير الطاقة: Automate devices to power down when no activity is detected.

Image 5.2: The SM301Z sensor can automate lighting based on motion detection.

6. الصيانة

6.1. استبدال البطارية

The SM301Z sensor is designed for long battery life (3+ years). When the batteries are low, your Zigbee hub application may notify you. To replace the batteries:

1. افتح الغطاء الخلفي لجهاز استشعار الحركة برفق.
2. قم بإزالة بطاريات AAA القديمة.
3. Insert three new AAA batteries, ensuring correct polarity (+/-).
4. أغلق الغطاء الخلفي بإحكام.
5. تخلص من البطاريات القديمة وفقًا للوائح المحلية.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your SAMOTECH SM301Z motion sensor, refer to the following common problems and solutions:

• لا يقترن المستشعر بالمحور:
  • تأكد من تشغيل جهاز Zigbee الخاص بك ووضعه في وضع الاقتران.
  • Verify the sensor's batteries are correctly installed and charged.
  • Perform a factory reset on the sensor by holding the RESET button for 5 seconds until the LED blinks, then attempt pairing again.
  • Ensure the sensor is within range of your Zigbee hub during pairing.
• No motion detected or inconsistent detection:
  • Check the sensor's placement. Ensure there are no obstructions blocking its field of view.
  • Verify the batteries are not depleted.
  • Confirm the sensor is still connected to your Zigbee hub in the app. If not, re-pair the device.
  • Avoid placing the sensor near heat sources (e.g., vents, direct sunlight) as these can cause false detections.
• False motion detections:
  • Review the sensor's placement to ensure it's not detecting pets, curtains moving in a draft, or reflections.
  • Ensure the sensor is not exposed to direct sunlight or strong drafts.

8. معلومات السلامة

يرجى قراءة واتباع إرشادات السلامة هذه لضمان التشغيل الآمن لجهازك:

• هذا الجهاز مخصص للاستخدام الداخلي فقط.
• لا تعرض الجهاز لدرجات حرارة عالية، أو أشعة الشمس المباشرة، أو الرطوبة العالية.
• احتفظ بالجهاز بعيدًا عن الماء والسوائل الأخرى.
• لا تحاول تفكيك الجهاز أو إصلاحه بنفسك. اتصل بالدعم الفني إذا كنت بحاجة إلى خدمة.
• تخلص من البطاريات بالطريقة الصحيحة وفقًا للوائح المحلية.

9. الضمان والدعم

The SAMOTECH SM301Z motion sensor comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official SAMOTECH webموقع.

For technical support, troubleshooting assistance, or any questions regarding your product, please contact SAMOTECH customer service through their official channels.