دليل تعليمات ساعة شارب الذرية

مقدمة

The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.

مميزات المنتج

• Atomic Time Accuracy: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
• Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
• Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
• جهاز استشعار لاسلكي خارجي: Transmits outdoor temperature data to the main unit.
• يعمل بالبطارية: Operates on batteries for flexible placement (batteries not included).
• الضبط التلقائي للتوقيت الصيفي (DST): Automatically adjusts for daylight saving time changes.
• المناطق الزمنية القابلة للتحديد: Allows selection of various US time zones.
• تنسيق 12/24 ساعة: Option to display time in either 12-hour or 24-hour format.
• Celsius/Fahrenheit Display: قم بالتبديل بين وحدات قياس درجة الحرارة المئوية والفهرنهايتية.

محتويات الحزمة

يرجى التأكد من وجود جميع العناصر قبل المتابعة في عملية الإعداد.

• Sharp Atomic Clock Main Unit
• جهاز استشعار خارجي لاسلكي
• دليل التعليمات

Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.

يثبت

1. تركيب البطارية

1. Open the battery compartment on the back of the main clock unit.
2. أدخل 2 بطاريات AA مع مراعاة القطبية الصحيحة (+ و -).
3. أغلق غطاء حجرة البطارية.
4. Open the battery compartment on the wireless outdoor sensor.
5. Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
6. Close the outdoor sensor's battery compartment cover.

2. Initial Synchronization and Settings

After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.

• المنطقة الزمنية: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
• تنسيق 12/24 ساعة: Press the "12/24" button to switch between 12-hour and 24-hour display.
• مئوية فهرنهايت: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
• Outdoor Sensor Pairing: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.

For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.

عملية

عرض المعلومات

The clock's large LCD screen displays the following information:

• وقت: Current time in selected 12-hour or 24-hour format.
• مؤشر ما بعد الظهر: Displays "PM" for afternoon hours in 12-hour format.
• مؤشر الإشارة الذرية: Shows the status of the WWVB atomic time signal reception.
• درجة الحرارة الداخلية: درجة الحرارة الحالية التي تقيسها الوحدة الرئيسية.
• Month/Date/Day: Current calendar information.
• درجة الحرارة الخارجية: Current temperature measured by the wireless outdoor sensor.
• قناة الاستشعار الخارجية: Indicates the channel the outdoor sensor is transmitting on.
• مؤشر انخفاض البطارية: An icon will appear when batteries are low and need replacement.

Button Functions (Rear Panel)

صيانة

• استبدال البطارية: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
• تنظيف: Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• وضع الاستشعار في الهواء الطلق: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.

استكشاف الأخطاء وإصلاحها

• Clock not syncing with atomic time:
  • Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
  • Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
  • Press the "WAVE" button to initiate a manual signal search.
  • يُرجى الانتظار لمدة تصل إلى 24 ساعة لإتمام عملية المزامنة الأولية.
• Outdoor temperature not displaying or incorrect:
  • Check batteries in the outdoor sensor.
  • Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
  • Press the "CHANNEL" button on the main unit to re-establish connection.
  • Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
• العرض باهت أو فارغ:
  • Replace all batteries in the main unit with fresh ones.
  • تأكد من إدخال البطاريات بالقطبية الصحيحة.
• وقت أو تاريخ غير صحيح:
  • تأكد من تحديد المنطقة الزمنية الصحيحة.
  • Check if Daylight Saving Time (DST) setting is correct for your region.
  • If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.

تحديد

الضمان والدعم

Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة مطالبات الضمان.