Luceco EFDGUIPPC-01

Luceco LED IP65 Fire Rated GU10 Downlight Polished Chrome Instruction Manual

Model: EFDGUIPPC-01

1. المقدمة

This manual provides essential instructions for the safe installation, operation, and maintenance of your Luceco LED IP65 Fire Rated GU10 Downlight. Please read this manual thoroughly before installation and retain it for future reference. This downlight is designed for recessed ceiling installation and features an IP65 rating, making it suitable for areas where protection against water jets is required, such as bathrooms (Zone 1 and 2) and outdoor sheltered areas. It also incorporates a fire-rated housing for enhanced safety.

Luceco LED IP65 Fire Rated GU10 Downlight, polished chrome finish, illuminated.

الشكل 1: Luceco LED IP65 Fire Rated GU10 Downlight (Polished Chrome)

تظهر هذه الصورة الواجهة الأمامية view of the Luceco LED IP65 Fire Rated GU10 Downlight. It features a polished chrome finish bezel with a central light source, designed for a sleek, modern appearance when installed in a ceiling.

2. معلومات السلامة

3. محتويات العبوة

تأكد من أن جميع المكونات موجودة وغير تالفة قبل الشروع في التثبيت.

4. المواصفات

ماركةلوسيكو
رقم الموديلEFDGUIPPC-01
أبعاد المنتج9.63 × 12.48 × 12 سم
وزن280 جرام
مادةمعدن
ينهيالكروم المصقول
أسلوبFixed Fire Rated GU10 Downlight / IP65 Rated
Lamp حاملGU10
ماكس واتtage35 واط (المصباح غير متضمن)
تصنيف IPIP65 (Suitable for bathrooms Zone 1 & 2)
Ceiling Cut-out Diameter72 ملم (تقريبًا)

5. الإعداد والتثبيت

مهم: Installation should only be performed by a qualified electrician. Ensure power is disconnected before starting.

  1. تحضير السقف:

    Using an appropriate hole saw, cut a circular opening in the ceiling with a diameter of approximately 72mm. Ensure there is sufficient vertical clearance in the ceiling void for the downlight's housing (approx. 12cm depth).

  2. التوصيلات الكهربائية:

    The downlight features tool-free access and loop-in loop-out terminals. Carefully strip the insulation from the live, neutral, and earth wires of your mains supply. Insert the wires into the corresponding push-fit terminals (Live, Neutral, Earth). Ensure a secure connection for all wires, especially the earth wire, due to the metal casing.

    مؤخرة view of Luceco downlight showing wiring terminals and spring clips.

    الشكل 2: Downlight Rear View مع أطراف توصيل الأسلاك

    This image displays the rear of the downlight, highlighting the black cylindrical housing, the spring-loaded clips for ceiling retention, and the push-fit wiring terminals for electrical connection.

  3. Insert GU10 Bulb:

    Before inserting the downlight into the ceiling, insert a GU10 bulb (not supplied) into the lamp holder. Align the two pins of the GU10 bulb with the slots in the lamp holder, push gently, and twist clockwise to secure it. Ensure the bulb length is within the 50-60mm limit.

  4. Install Downlight into Ceiling:

    Fold back the spring clips on the sides of the downlight housing. Carefully push the downlight into the prepared ceiling opening until the spring clips engage and hold the fitting securely in place. Ensure the rubber gasket is properly seated to maintain the IP65 rating.

  5. Attach Bezel:

    The polished chrome bezel is secured by a twist mechanism. Align the bezel with the main housing and twist clockwise until it clicks securely into place. Ensure it is flush with the ceiling surface.

    Polished chrome bezel for the downlight.

    الشكل 3: Polished Chrome Bezel

    This image shows the separate polished chrome bezel, which is the visible trim of the downlight once installed. It features a smooth, reflective surface and a textured edge for grip during installation.

  6. اعادة الطاقة:

    Once installation is complete and all connections are secure, restore power at the consumer unit/fuse box.

6. تعليمات التشغيل

The Luceco LED IP65 Fire Rated GU10 Downlight operates via your standard wall light switch. Simply toggle the switch to turn the light on or off.

7. الصيانة

8. استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
الضوء لا يعمل.
  • لا يوجد طاقة للدائرة.
  • لمبة معيبة.
  • اتصال الأسلاك فضفاضة.
  • تحقق من قاطع الدائرة / المصهر.
  • استبدل المصباح GU10.
  • Switch off power and check wiring connections. Consult a qualified electrician if unsure.
Bezel does not sit flush.
  • Incorrectly aligned.
  • إعاقة.
  • Remove and re-align the bezel, twisting clockwise until secure.
  • Check for any debris or misaligned components.

9. معلومات إعادة التدوير

This product falls under the Waste Electrical and Electronic Equipment (WEEE) directive. Do not dispose of electrical products with household waste. Please recycle where facilities exist. Check with your local authority for recycling advice.

For information on recycling light bulbs and how to clean up broken lamps, please refer to local guidelines or official recycling resources.

10. الضمان والدعم

Luceco products are manufactured to high standards and are designed for durability. For specific warranty details or technical support, please refer to the warranty card included with your purchase or visit the official Luceco webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.

المستندات ذات الصلة - EFDGUIPPC-01

قبلview Luceco FIRE RATED LED COMPACT FIXED DOWNLIGHT Installation Guide
Comprehensive installation and operating instructions for the Luceco FIRE RATED LED COMPACT FIXED DOWNLIGHT. Includes assembly, wiring, dimensions, insulation requirements, and contact information.
قبلview فانوس لوسيكو الخارجي المزخرف E27 مزود بمستشعر حركة PIR - تعليمات التركيب والتشغيل
تعليمات شاملة لتركيب وتشغيل فانوس لوسيكو الخارجي المزخرف E27 المزود بمستشعر حركة بالأشعة تحت الحمراء. تتضمن قائمة الملحقات، وإرشادات خطوة بخطوة، ومعلومات الدعم الفني.
قبلview تعليمات التركيب والتشغيل لخلية Luceco Storm Photocell LSPC500-01
دليل شامل لتركيب وتشغيل خلية Luceco Storm الضوئية (LSPC500-01). هذا المستشعر الضوئي الخارجي، الحاصل على تصنيف IP65، مصمم للاستخدام المنزلي، ويأتي بضمان لمدة 3 سنوات. يتضمن هذا الدليل المواصفات الفنية، وتعليمات التركيب خطوة بخطوة، مع وصف للمخططات، ومعلومات الاتصال.
قبلview LUCECO Solar Guardian Floodlight with PIR Sensor: Installation & Operating Guide
Comprehensive guide for installing and operating the LUCECO Solar Guardian Floodlight with PIR Sensor. Features include solar power, motion detection, IP65 rating, and multiple working modes.
قبلview Luceco LED ECO Climate T8 IP65 Installation & Operating Instructions
Detailed installation and operating instructions for the Luceco LED ECO Climate T8 IP65 anti-corrosive luminaire, including assembly, wiring, and component replacement guidance.
قبلview Luceco LED ECO Climate T8 IP65 Anti-Corrosive Luminaire: Installation & Operating Instructions
Detailed installation and operating guide for the Luceco LED ECO Climate T8 IP65 anti-corrosive luminaire. Covers assembly, mounting, wiring, component replacement, warranty, and safety information.