مقدمة
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your 3PLUS HCB050401 18-Gauge Brad Nailer and Quiet Air Compressor Combo Kit. Please read this manual thoroughly before use and retain it for future reference.
معلومات هامة حول السلامة
تحذير: قد يؤدي عدم اتباع تعليمات السلامة هذه إلى إصابات خطيرة أو أضرار في الممتلكات.
- Always wear safety glasses and hearing protection when operating the nailer and compressor.
- Never point the nailer at yourself or others.
- Disconnect the air supply before making adjustments, clearing jams, or performing maintenance.
- تأكد من أن منطقة العمل نظيفة ومضاءة جيداً وخالية من العوائق.
- Do not operate the compressor or nailer in damp أو الظروف الرطبة.
- أبقِ الأطفال والمارة بعيدًا عن منطقة العمليات.
- Regularly inspect the air hose for damage and ensure all connections are secure.
- Do not exceed the maximum operating pressure of the tools.
- سلامة الضاغط: The compressor tank fills quickly and automatically stops when topped off. However, always monitor the pressure gauge and manually shut off the compressor if it does not stop automatically to prevent over-pressurization.
المنتج انتهىview
The 3PLUS HCB050401 combo kit includes an 18-gauge brad nailer (HF50SP) and a 1-gallon quiet air compressor (HC0504G), designed for various finish and trim applications.
مكونات الطقم
- 18-Gauge Brad Nailer (HF50SP)
- 1-Gallon Air Compressor (HC0504G)
- Air Hose with Fittings
- نظارات السلامة
- مفاتيح
- الدليل
الشكل 1: The complete 3PLUS HCB050401 18-Gauge Brad Nailer and Quiet Air Compressor Combo Kit, including the brad nailer, air compressor, air hose, safety goggles, and wrenches.
Air Compressor (HC0504G) Features
- Direct-drive, oil-free pump for clean operation and minimal maintenance.
- Roll bar design protects vital components.
- Low noise level of 65 dBA.
- 1-gallon tank capacity.
- 125 PSI maximum pressure.
الشكل 2: عن قرب view of the 3PLUS HC0504G Air Compressor, highlighting its gauges and controls. The compressor is red with black accents and features a protective roll bar handle.
Brad Nailer (HF50SP) Features
- Drives 18-gauge brad nails from 3/4'' to 2'' (20-50mm).
- Adjustable depth-of-drive for precise nail placement.
- 360° air exhaust directs air away from the user.
- Quick-clear jam release for easy maintenance.
- No-mar tip protects work surfaces.
الشكل 3: جانب view of the 3PLUS HF50SP 18-Gauge Brad Nailer, showing its magazine and ergonomic grip. The nailer is black with a red top housing.
تعليمات الإعداد
1. التفريغ والتفتيش
Carefully remove all components from the packaging. Inspect for any shipping damage. Ensure all listed components are present.
2. توصيل خرطوم الهواء
- Connect one end of the air hose to the compressor's air outlet. Ensure a secure, airtight connection.
- Connect the other end of the air hose to the air inlet fitting on the brad nailer.
- تأكد من إحكام جميع الوصلات لمنع تسرب الهواء.
الشكل 4: The air hose connected to the brad nailer, ready for operation. The quick-connect fitting ensures a secure attachment.
3. Loading the Brad Nailer
- Ensure the air supply is disconnected from the nailer.
- اسحب متتبع المجلة للخلف حتى يتم قفله في وضع الفتح.
- Insert a strip of 18-gauge brad nails (3/4" to 2" in length) into the magazine with the points facing down.
- حرر نابض المخزن، مما يسمح له بدفع المسامير للأمام.
تعليمات التشغيل
1. Air Compressor Operation
- Place the compressor on a stable, level surface.
- Plug the compressor into a 120V power outlet.
- Turn the power switch to the "ON" position. The compressor will begin to fill the tank.
- Monitor the tank pressure gauge. The compressor is designed to automatically shut off when the maximum pressure (125 PSI) is reached. If it does not, immediately turn the power switch to "OFF".
- Adjust the output pressure using the regulator knob to the recommended operating pressure for your brad nailer (60-120 PSI).
الشكل 5: Close-up of the air compressor's control panel, showing the pressure gauges and regulator knob. This image helps identify the components for pressure adjustment.
2. Brad Nailer Operation
- Ensure the air hose is securely connected and the compressor is set to the desired operating pressure.
- Adjust Depth-of-Drive: Use the depth adjustment wheel on the nailer to control how deep the nail is driven into the material. Test on a scrap piece of material first.
- Place the nailer's nose against the workpiece where you want to drive a nail.
- Press down firmly on the nailer to engage the safety contact trip.
- اضغط على الزناد لإطلاق مسمار.
- Release the trigger and lift the nailer from the workpiece.
الشكل 6: Close-up of the brad nailer's depth adjustment wheel, illustrating how to control nail depth. The image shows examples of nails driven flush and recessed.
الشكل 7: The quick-clear jam release mechanism on the brad nailer, designed for easy removal of jammed nails.
الشكل 8: The 360° adjustable air exhaust on the brad nailer, allowing users to direct exhaust air away from their face and work area.
التطبيقات
This combo kit is suitable for various finish and trim applications, including:
- مجلس الوزراء
- Furniture construction
- Interior and exterior trimming
- باب ونافذة جasings
- Craft projects
الشكل 9: The brad nailer being used for installing trim, demonstrating its application in finish carpentry.
صيانة
Regular maintenance ensures the longevity and optimal performance of your 3PLUS combo kit.
1. Air Compressor Maintenance
- تفريغ خزان الهواء: After each use, or daily if used frequently, drain moisture from the air tank. Turn off the compressor, disconnect power, and open the drain valve at the bottom of the tank until all air and moisture are expelled. Close the drain valve.
- مضخة خالية من الزيت: The HC0504G compressor features an oil-free pump, eliminating the need for oil changes or lubrication.
- فلتر الهواء النظيف: Periodically inspect and clean the air filter to ensure proper airflow.
الشكل 10: Close-up of the air compressor's drain valve, located at the bottom of the tank. This valve is used to release condensed moisture.
2. Brad Nailer Maintenance
- تشحيم: Apply a few drops of pneumatic tool oil into the air inlet before each use.
- تنظيف: Keep the nailer clean and free of debris. Use compressed air to clear dust from the magazine and firing mechanism.
- فحص: Regularly check for loose screws, worn parts, or damage. Replace any damaged components immediately.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يعمل جهاز تثبيت المسامير أو يعمل بشكل ضعيف. | Low air pressure; no nails in magazine; jammed nails; worn O-rings. | Increase compressor pressure; load nails; clear jam using quick-release; inspect and replace O-rings if necessary. |
| تتكدس الأظافر بشكل متكرر. | Incorrect nail size; damaged nails; low air pressure; dirty magazine. | Use correct 18-gauge nails (3/4" to 2"); inspect nails for damage; increase air pressure; clean magazine. |
| Compressor runs continuously or does not build pressure. | Air leak; faulty pressure switch; drain valve open. | Check all connections for leaks; ensure drain valve is closed; contact customer support if pressure switch is suspected. |
| Compressor does not shut off automatically at max pressure. | تبديل الضغط الخاطئ. | Immediately turn off the compressor manually. This is a safety concern. Contact customer support for repair or replacement of the pressure switch. |
تحديد
Air Compressor (HC0504G)
- المحرك: 0.5 حصان
- المجلدtage: 120 فولت
- توصيل الهواء: 0.7 قدم مكعب عند 90 رطل لكل بوصة مربعة
- سعة الخزان: 1 جالون (4 لتر)
- الحد الأقصى للضغط: 125 PSI (8.6 بار)
- نوع المضخة: Single pump, oil-free
- مستوى الضوضاء: 65 ديسيبل
- وزن السلعة: 23 رطل
- طول الخرطوم: 25 Feet (included)
- أبعاد المنتج: 16.42"L x 16.42"W x 14.02"H (approximate, based on overall kit dimensions)
الشكل 11: Diagram illustrating the key specifications and dimensions of the 3PLUS HC0504G Air Compressor.
Brad Nailer (HF50SP)
- كَيّل: 18 جيجا
- قدرة التحميل: 100 مسمار
- ضغط هواء التشغيل: شنومكس-شنومكس يسي
- طول الأظافر: 3/4" to 2" (20-50mm) brad nails
- سمات: Adjustable depth-of-drive, 360° air exhaust, quick-clear jam release, no-mar tip.
- أبعاد المنتج: 9.8"L x 2.7"W x 9.8"H (approximate, based on image)
الشكل 12: Diagram illustrating the key specifications and dimensions of the 3PLUS HF50SP Brad Nailer.
الضمان والدعم
For warranty information, technical support, or to inquire about replacement parts, please contact 3PLUS customer service. Refer to the contact information provided with your product packaging or visit the official 3PLUS webموقع.
الموارد المتاحة على الإنترنت: للحصول على مزيد من الدعم ومعلومات المنتج، يمكنك زيارة 3PLUS Store on Amazon.
