NETGEAR Cable Modem CM700 Instruction Manual

1. المقدمة

The NETGEAR CM700 High Speed Cable Modem provides a reliable connection to high-speed cable Internet. Engineered with DOCSIS 3.0 technology and 32x8 channel bonding, it supports cable internet plans up to 800Mbps. This modem is designed to be compatible with major cable internet providers, offering a cost-effective alternative to renting equipment from your service provider.

2. محتويات العبوة

تأكد من وجود جميع العناصر في الحزمة الخاصة بك:

• High Speed Cable Modem (CM700)
• كابل إيثرنت
• دليل التثبيت السريع
• محول الطاقة

3. انتهى المنتجview

3.1 اللوحة الأمامية

The front panel of the CM700 modem features several LED indicators that provide status information about your connection and device operation.

الشكل 1: الجبهة view of the NETGEAR CM700 cable modem with indicator lights for power, internet, upstream, downstream, and Ethernet activity.

3.2 اللوحة الخلفية

The rear panel contains all the necessary ports for connecting the modem to your internet service and other devices.

الشكل 2: خلفي view of the NETGEAR CM700 cable modem, highlighting the Ethernet port, Reset button, Cable/Internet coaxial connector, Power input, and On/Off switch.

4. الإعداد والتثبيت

4.1 التحقق من التوافق

Before installation, verify that your internet service provider (ISP) supports the NETGEAR CM700 modem. This modem is compatible with major cable internet providers including Xfinity by Comcast, COX, and Spectrum. It is not compatible with Verizon, AT&T, CenturyLink, DSL providers, DirecTV, DISH, or any bundled voice service.

Figure 3: Compatibility logos for Xfinity, Cox, and Spectrum, confirming support for the CM700 modem.

4.2 اتصال فيزيائي

1. Power Off Existing Equipment: Disconnect power from your existing modem and router (if applicable).
2. توصيل الكابل المحوري: Connect a coaxial cable from the wall outlet to the Cable/Internet port on the rear of your CM700 modem. Ensure the connection is secure.
3. توصيل كابل إيثرنت: Connect one end of the provided Ethernet cable to the Ethernet port on the rear of your CM700 modem. Connect the other end to your computer or to the WAN/Internet port of your Wi-Fi router.
4. توصيل محول الطاقة: Plug the power adapter into the Power port on the modem and then into an electrical outlet. Press the On/Off button if present.
5. انتظر الأضواء: Allow the modem several minutes to power on and establish a connection. The Power, Downstream, Upstream, and Internet LEDs on the front panel should turn solid green or blue, indicating a successful connection.

4.3 Activate Your Internet Service

After connecting the modem, you will need to activate your internet service. The activation process varies by ISP:

• إكسفينيتي: For Xfinity customers, fast web self-activation is often available. Open a web browser on a connected device and follow the on-screen instructions. If self-activation fails, call Xfinity customer support.
• Other ISPs (Cox, Spectrum, etc.): Contact your ISP directly to activate the modem. You will typically need to provide the modem's serial number and MAC address, which are located on a label on the modem.

5. تشغيل المودم

5.1 مؤشرات LED

The LED lights on the front of your CM700 modem provide important status information:

6. الصيانة

• الموقع: Place the modem in a well-ventilated area to prevent overheating. Avoid placing it in enclosed spaces or near heat sources.
• تنظيف: Use a soft, dry cloth to clean the modem. Do not use liquid or aerosol cleaners.
• تحديثات البرامج الثابتة: Firmware updates are typically managed by your cable internet provider. Ensure your modem is always connected to the internet to receive these updates.
• إعادة التشغيل العادية: Occasionally restarting your modem (power cycling) can help resolve minor connectivity issues and improve performance. To do this, unplug the power adapter, wait 10-15 seconds, and then plug it back in.

7. استكشاف الأخطاء وإصلاحها

7.1 لا يوجد اتصال بالإنترنت

• فحص الكابلات: تأكد من توصيل جميع الكابلات (المحورية، والإيثرنت، والطاقة) بشكل آمن بالمودم ومنافذ الحائط.
• التحقق من حالة LED: Refer to the LED indicator table in Section 5.1. If the Downstream, Upstream, or Internet LEDs are not solid, there may be an issue with your cable signal or ISP connection.
• مودم دورة الطاقة: Unplug the modem's power adapter, wait 10-15 seconds, and plug it back in. Allow several minutes for the modem to restart and reconnect.
• اتصل بمزود خدمة الإنترنت: If the issue persists after checking connections and power cycling, contact your internet service provider. There might be an outage in your area or a problem with your service.

7.2 سرعات الإنترنت البطيئة

• Verify Plan Speed: Confirm that your internet plan speed matches the capabilities of your modem. The CM700 supports plans up to 800Mbps.
• اختبر مباشرة: Connect a computer directly to the modem's Ethernet port (bypassing your router) and perform a speed test. This helps determine if the modem or your router is the bottleneck.
• التحقق من التداخل: If using a Wi-Fi router, ensure it's placed optimally and not experiencing interference from other devices.
• اتصل بمزود خدمة الإنترنت: If speeds remain consistently low, contact your ISP to check your line quality and service provision.

8. المواصفات

9. الضمان والدعم

For warranty information and technical support, please visit the official NETGEAR website. You can find detailed warranty terms and contact information for customer support at www.netgear.com/warranty.