Apps IVY Smart Apps

Product Information
Specifications
- Product Name: WiFi Camera
- Supported Networks: 2.4GHz Wi-Fi
- App Name: IVY Smart APP
- Support: Bluetooth and Wi-Fi setup
- Device Setup Time: Approximately 2 minutes
Instructions for use
Add device: Bluetooth addition
- Click “Add Device”
- Select “Bluetooth Addition”
- Please follow the instructions on the page, confirm and click Next

- After turning on Bluetooth on your phone, wait for the APP to search for the device.
- Select camera
- Please configure the Wi-Fi name and password

- Connecting
- Device added successfuly, Please set the device name

Add device: Wi-Fi Add
- Click “Add Device”
- Select “Wi-Fi added”
- Please follow the instructions on the page, confirm and click Next

- Please configure the Wi-Fi name and password
- Let the QR code directly at the camera lens, with the optimal distance being 4-6 inches (10-15cm). When you hear the WiFi connection success prompt sound, click Next

- Connecting
- Device added successfully, Please set the device name

Equipment functions

Safety tips
- Before using the camera, make sure you have an appropriate power source.
- To avoid the risk of fire or electric shock, keep the camera in a cool, dry place.
- Please keep the camera out of the reach of children. Children should use this product under adult supervision.
- The power adapter cable and network cable of this product have potential strangulation hazards. For child safety, keep these cords out of reach of children.
Packing list
- Camera,
- Power Adapter,
- Quick Start Manual,
- screw bag
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Frequently Asked Questions (FAQ)
Can I use a 5GHz Wi-Fi network for setup?
How long does it take to add a device successfully?
What is the minimum bandwidth required to view real-time video?
Why can’t I store and read videos normally even after inserting a Micro SD (TF) card?
Documents / Resources
![]() | IVY Smart App |
References
- User Manualmanual.tools


What does “Device Landing!” mean?
What does the term "Device Landing!" mean in the IVY Smart App?
While the term "Device Landing!" does not appear explicitly in the provided manual text, it is likely a translation variation or a specific notification within the IVY Smart App interface related to the device connection process.
Based on the manual's setup steps, this phrase most likely refers to one of the following:
If you see this message, you should proceed to the next step in the app, which is typically naming your device (e.g., "Living Room," "Garage") and clicking Save to finish the setup.
Read the full Q&A page