Apps iStrip Plus App User Guide

Apps-iStrip-logoApps iStrip Plus App

Apps-iStrip-Plus-App-product

Specifications

  • Model: SSL-xxxxxx
  • Compliance: FCC Part 15
  • RF Exposure Guidelines: Maintain a minimum distance of 20cm between the device and the body

Product Usage Instructions

  1. Power On: Plug in the device to activate the light automatically.
  2. App Installation: Scan the QR code provided on the right to download the companion app.Apps-iStrip-Plus-App-fig-1Apps-iStrip-Plus-App-fig-2
  3. Device Connection: Open the app and search for the SSL-xxxxxx device. Connect to it through the app.
  4. Mode Control: Use the app to access different modes and functions of the device. Control all functionalities through the app interface.Apps-iStrip-Plus-App-fig-3

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a different circuit. From that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement
To maintain compliance with the FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.

FAQs

Q: What should I do if the device does not turn on automatically?

A: Check the power source and ensure proper connection. If the issue persists, contact customer support for assistance.

Q: Is it safe to use the device close to my body?

A: To comply with FCC RF Exposure guidelines, maintain a minimum distance of 20cm between the device and your body to ensure safe operation.

Documents / Resources

PDF thumbnailiStrip Plus App
User Guide · iStrip Plus App, App

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.