Apps Happy Lighting App
BLE Connection
For the first time you use it or never pair with ‘Happy Lighting’ after moving the equipment, please following the below steps:
A, First, please enteryourphone settings, open the BLE.
B, Second, Open the Happy Lighting app, theapp will auto to connect the BLE light.
Main User Interface
A, Adjust: Change the RGB LED color and White LED bright.
B, Music: Play music and change RGB LED color by music rhythm.
C, Tape: Change RGB LED color by phone microphone input voice rhythm.
D, Style: Change RGB LED color by fixed model.
E, Timing: Timers, auto ON/OFF.
F, Setting: Shake: Change RBG LED color by shake the phone.
H: Rainbow Settings: when have the rainbow function, can set the LED Type, RGB Output Sequence, Connection requires password.
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.
Specifications
|
Product Specifications |
Description |
|
Product Name |
2A8TI-LED & 2A8TILED LED Devices |
|
Compatibility |
Happy Lighting App |
|
Connection Type |
Bluetooth Low Energy (BLE) |
|
Main User Interface Functions |
|
|
Rainbow Settings |
|
|
FCC Compliance |
|
FAQS
If your LED devices cause harmful interference to radio or television reception, try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician for help.
To ensure safe and effective use of your LED devices, follow the instructions carefully to avoid harmful interference with radio communications and ensure FCC compliance.
FCC compliance refers to following regulations set by the Federal Communications Commission to ensure that electronic devices do not interfere with radio communications.
On the main user interface of the Happy Lighting app, you can adjust the RGB LED color and white LED brightness, play music and change RGB LED color by music rhythm, change RGB LED color by phone microphone input voice rhythm, change RGB LED color by fixed model, set timers for auto ON/OFF, and use the shake function to change RBG LED color by shaking the phone.
To connect your LED devices to the Happy Lighting app, first, enter your phone settings, open the BLE. Second, open the Happy Lighting app, the app will auto-connect the BLE light.
The Happy Lighting App User Manual provides detailed instructions on how to safely use the 2A8TI-LED and 2A8TILED LED devices with the Happy Lighting app.
Documents / Resources
 | Happy Lighting App |
References
- User Manualmanual.tools
No sirve la música
The music feature is not working.
If the music feature in the Happy Lighting App is not working, please try the following troubleshooting steps based on the manual:
Read the full Q&A page