Home › APPs › Apps Da Fit App User Guide

Apps Da Fit App User Guide

Apps
Da Fit App
User Guide

A *The first Bluetooth, APP’s Bluetooth(Da Fit)

1. Turn on Phone’S Bluetooth

2. Find and enter google Play Store APP Store

3. After searching and downloading,enter Da Fit app

4. Enter app and find TANK M1 PRO to bind (Please fully charged it when the first time to use)

B:* The second Bluetooth,(Call receiving/dial)function of Bluetooth link

5. Swipe down the screen,turn on the call function switch

6. Open phone’s setting and turn on the Bluetooth,find the Audio -TANK M1 PRO and click it to connect

7 Find the Audio_M1 PRO CALL and click it to connect

8. After connection,you can use the watch to (Call receiveing/ Dial)calls

Documents / Resources

	Da Fit App User Guide · Da Fit, App, Da Fit App
	Da Fit App User Guide · Da Fit App, Da Fit, App

References

User Manualmanual.tools

Published: August 24, 2022

Updated: August 25, 2022

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Tim Hinze Sr says:

December 1, 2022 at 9:47 am
rwo watches, no luck, any easy, simple manuals or anything, disabled Vet? Tim Hinze Sr, tiger11946sr@live.com, THANK YOU!!!!!! i have all numbers, if youm need?
Tim Hinze Sr asks rwo watches, no luck, any easy, simple manuals or anything, disabled Vet? Tim Hinze Sr, tiger11946sr@live.com, THANK YOU!!!!!! i have all numbers, if youm need?

Manuals+ clarified question

Question

How do I set up my smartwatches with the Da Fit app?
Answer

To set up your watches with the Da Fit app, please follow these simplified steps:

Download the App: Open the Google Play Store or Apple App Store on your phone, search for "Da Fit", and install it.

Enable Bluetooth: Go to your phone's settings and ensure Bluetooth is turned ON.

Bind the Watch: Open the Da Fit app, go to the "Device" tab (usually a watch icon), and click "Add a Device". Select your watch model from the list to bind it.

Enable Calling (If supported): Swipe down on your watch screen to find the Call/Phone icon and turn it on. Then, go to your phone's Bluetooth settings and connect to the device labeled "Audio" or "Call" (e.g., "Audio_M1 PRO CALL" or "I18").

If you have specific model numbers for your watches, please provide them so we can give you more precise instructions. You can also search for your specific model at Manuals.plus Deep Search.
Read the full Q&A page
Reply
Klaus Eisenmann says:

January 24, 2023 at 4:45 pm
In my app, the bar chart is not displayed for steps. Can you set something there?
Bei meiner APP wird bei Schritte das Balkendiagramm nicht angezeigt. Kann man da was einstellen.

Klaus Eisenmann asks <em>In my app, the bar chart is not displayed for steps. Can you set something there?
Bei meiner APP wird bei Schritte das Balkendiagramm nicht angezeigt. Kann man da was einstellen.

Manuals+ clarified question

Question

Why is the step bar chart not displaying in the Da Fit app and how can I fix it?

Answer

If the bar chart for steps is not appearing in your Da Fit app, it is usually related to data synchronization or app permissions. Please try the following steps to resolve the issue:

Sync Data: Open the Da Fit app and swipe down on the main dashboard to force a manual synchronization with your watch. Ensure your Bluetooth is active and the device shows as "Connected" in the app.

Check Permissions: Ensure the Da Fit app has permission to access physical activity or health data in your phone's system settings.

App Update: Check the Google Play Store or Apple App Store to ensure you are running the latest version of the Da Fit app, as updates often fix display bugs.

Re-bind Device: If the chart remains empty, try unbinding the watch from the app, restarting both your phone and the watch, and then re-pairing them through the "Add a Device" menu.

Note: The bar chart typically requires at least one full day of recorded data to populate the historical view. If you just set up the device, wait 24 hours to see if the chart begins to display.

Read the full Q&A page
Reply
W.C. Heens says:

April 16, 2023 at 6:45 pm
Good evening, I have owned a NASA P18T Moy-God3-2.3.2 watch for almost a year now.
a purchase that I regret enormously because I keep busy connecting and selecting the watch face reinstalling the app, the push button does more than work and I constantly lose my settings.
It was purchased on 4/13/2022.
What can I do with this?
Goedenavond, ik ben nu bijna een jaar in het bezit van een horloge van het type NASA P18T Moy-God3-2.3.2 .
een aankoop waar ik enorme spijt heb omdat ik bezig blijf met verbinden en de wijzerplaat selecteren de app opnieuw installeren, het drukknopje werkt meer niet dan wel en ik ben voortdurend mijn instellingen kwijt.
Het is gekocht op 13-04-2022.
Wat kan ik hiermee ?

W.C. Heens asks <em>Good evening, I have owned a NASA P18T Moy-God3-2.3.2 watch for almost a year now.
a purchase that I regret enormously because I keep busy connecting and selecting the watch face reinstalling the app, the push button does more than work and I constantly lose my settings.
It was purchased on 4/13/2022.
What can I do with this?
Goedenavond, ik ben nu bijna een jaar in het bezit van een horloge van het type NASA P18T Moy-God3-2.3.2 .
een aankoop waar ik enorme spijt heb omdat ik bezig blijf met verbinden en de wijzerplaat selecteren de app opnieuw installeren, het drukknopje werkt meer niet dan wel en ik ben voortdurend mijn instellingen kwijt.
Het is gekocht op 13-04-2022.
Wat kan ik hiermee ?

Manuals+ clarified question

Question

How can I fix connectivity issues, hardware button failure, and loss of settings on my NASA P18T watch using the Da Fit app?

Answer

Based on the Da Fit app guide and common troubleshooting for this type of smartwatch, here are the steps you can take to address these issues:

Connectivity and Settings Loss: Ensure that the Da Fit app has permission to run in the background on your phone. If the phone's operating system closes the app to save battery, the watch will disconnect and may lose synced data. In your phone's settings, set the Da Fit app to "Manual Management" or "Do Not Optimize Battery."

Re-binding the Device: To ensure a stable connection, first "Remove" or "Unbind" the watch from the Da Fit app. Then, go to your phone's Bluetooth settings and "Forget" the P18T device. Restart both your phone and the watch, then follow the app's instructions to "Add a Device" again.

Hardware Button Issue: If the physical push button is intermittently working or failing, this is likely a hardware defect. Since you purchased the device in April 2022, it may be outside of a standard one-year warranty period, but you should contact the original seller or the manufacturer (NASA/Moy-God) to inquire about repair or replacement options.

Firmware Update: Check the Da Fit app under the "Device" tab for any available firmware updates. Updating the watch's software can sometimes resolve bugs related to settings being lost.

If the physical button continues to fail, the device may have reached the end of its functional life, as this is a hardware component that cannot be fixed via software.

Read the full Q&A page
Reply
AJ Inte says:

April 17, 2023 at 5:02 pm
Worst smart phone programming EVER.
Phone has very few usable “watch faces” – lots of watch faces that an 8 year old child might like. Room for only one choice to add to face list. But (of course) the selected downloaded watch face will disappear after a day or two. A FANTASTIC feature! I LOVE having to download a reasonable watch face over and over! Another bonus feature: Watch AUTOMATICLLY connects to my Phone no matter how many times I disable that feature. I’m hiding my watch in the kitchen, hoping it will run out of battery power, so that my Phone will be useful
AJ Inte asks Worst smart phone programming EVER.
Phone has very few usable "watch faces" - lots of watch faces that an 8 year old child might like. Room for only one choice to add to face list. But (of course) the selected downloaded watch face will disappear after a day or two. A FANTASTIC feature! I LOVE having to download a reasonable watch face over and over! Another bonus feature: Watch AUTOMATICLLY connects to my Phone no matter how many times I disable that feature. I'm hiding my watch in the kitchen, hoping it will run out of battery power, so that my Phone will be useful

Manuals+ clarified question

Question

How can I manage watch faces and prevent the Da Fit app from automatically reconnecting to my phone?
Answer

It sounds like you are experiencing issues with the Da Fit app's synchronization and connectivity. Here are some steps to address your concerns:

Watch Face Disappearing: This often occurs if the app's background processes are being killed by your phone's battery optimization settings. To fix this, ensure the Da Fit app has permission to run in the background and is not being 'optimized' or 'put to sleep' by your phone's OS. Also, ensure you are using the 'Watch Faces' menu within the app to properly sync and save your selection.

Automatic Reconnection: The Da Fit app is designed to maintain a constant connection for notifications and data syncing. If you wish to stop the watch from connecting, you must Unbind the device within the app:

Open the Da Fit app.

Go to the 'Device' tab (middle icon).

Select 'Remove' or 'Unbind' at the bottom.

Additionally, go to your phone's Bluetooth Settings, find the watch (e.g., TANK M1 PRO or I18), and select 'Forget this Device' or 'Unpair'.

Call Function: If your watch supports calling, it may have a second Bluetooth connection (often labeled 'Audio' or 'Call'). You must disable the 'Call' function switch on the watch itself (usually found by swiping down to the quick settings menu) to stop it from acting as a Bluetooth speaker/headset.

If the watch continues to reconnect after being unpaired and unbound, ensure no other fitness apps are attempting to access the device.
Read the full Q&A page
Reply
AJ Inte says:

April 17, 2023 at 5:03 pm
Worst smart phone programming EVER.
AJ Inte asks Worst smart phone programming EVER.

Manuals+ clarified question

Question

How do I properly set up and program the Da Fit app with my smartphone?
Answer

We are sorry to hear you are having a frustrating experience with the Da Fit app. Many users find the setup process complex because it requires two separate Bluetooth connections for full functionality. To ensure the app and watch are programmed correctly, please follow these steps:

Step 1: App Connection - Turn on your phone's Bluetooth, open the Da Fit app, go to the 'Device' tab, and select 'Add a Device' to bind your watch (e.g., TANK M1 PRO or I18).

Step 2: Call Function Programming - To enable calling features, swipe down on your watch face and turn on the 'Call' or 'Phone' icon. Then, go to your phone's system Bluetooth settings and find the secondary Bluetooth signal (often labeled as 'Audio_...' or the device name again) and click connect.

Permissions - Ensure the app has all requested permissions (Notifications, Location, and Contacts) enabled in your smartphone's settings to prevent synchronization issues.

If you are experiencing specific bugs or crashes, please ensure both the app and your watch firmware are updated to the latest version via the 'Upgrade' section in the app.
Read the full Q&A page
Reply
Pieter Matthijssen says:

October 5, 2023 at 8:48 am
ik ben mijn koppelsnoer kwijtgeraakt. kan ik een nieuwe bij jullie kopen?
Pieter Matthijssen asks ik ben mijn koppelsnoer kwijtgeraakt. kan ik een nieuwe bij jullie kopen?

Manuals+ clarified question

Question

Where can I buy a replacement charging or connection cable for my Da Fit compatible smartwatch?
Answer

Manuals.plus is a provider of digital manuals and does not sell replacement parts, such as charging or connection cables, directly. Because the Da Fit App is a generic application used by many different smartwatch brands (such as Kospet, Colmi, and various generic models), the specific cable you need depends on your exact watch model.

To find a replacement cable, we recommend the following:

Identify your watch model: Check the back of the watch or the original packaging for a model name (e.g., TANK M1 PRO, I18).

Search online marketplaces: Search for "[Your Watch Model] charging cable" on sites like Amazon, eBay, or AliExpress.

Contact the manufacturer: Reach out to the brand that manufactured the watch for official accessories.
Read the full Q&A page
Reply
Cate Madison says:

November 6, 2023 at 1:26 pm
can you tell me how to change the time.please?
Cate Madison asks can you tell me how to change the time.please?

Manuals+ clarified question

Question

How do I change the time on the Da Fit app or connected watch?
Answer

To change the time on your smartwatch using the Da Fit app, you must synchronize the watch with your smartphone. Smartwatches using this app typically do not have a manual time setting on the watch itself; they inherit the time from the connected phone.

Follow these steps to sync the time:

Ensure your phone's Bluetooth is turned on.

Open the Da Fit app on your smartphone.

Go to the Device tab (usually the middle icon at the bottom).

If your watch is not already connected, tap ADD A DEVICE and select your watch model (e.g., TANK M1 PRO or I18) to bind it.

Once the device is successfully connected and synchronized, the watch will automatically update to match the current time and date on your smartphone.

If the time is incorrect, check your phone's system settings to ensure the time is set to "Automatic" or "Set Automatically," then refresh the Da Fit app by swiping down on the home screen.
Read the full Q&A page
Reply
Hans O. Larsen says:

October 26, 2024 at 9:08 am
Hvor kan man finde en læselig brugervejledning ?
Den der følger med købet er skrevet med så små bogstaver, at den er ulæselig og dermed komplet ubrugelig !!!
Hans O. Larsen asks Hvor kan man finde en læselig brugervejledning ?
Den der følger med købet er skrevet med så små bogstaver, at den er ulæselig og dermed komplet ubrugelig !!!

Manuals+ clarified question

Question

Where can I find a readable user manual for the Da Fit app?
Answer

You can find a readable, digital version of the Da Fit App User Guide directly on this page. Digital manuals allow you to zoom in to a comfortable reading size on your computer, tablet, or smartphone.

Key setup steps for the Da Fit app include:

Download: Search for "Da Fit" in the Google Play Store or Apple App Store.

Connection: Turn on your phone's Bluetooth, open the Da Fit app, and select "Add a Device" to bind your smartwatch (e.g., TANK M1 PRO or I18).

Call Functions: To enable calling features, you must also pair the watch's audio Bluetooth (often labeled as "Audio_M1 PRO" or similar) within your phone's system Bluetooth settings.

If you need a PDF version to print at a larger scale, you can often find download links at the bottom of the manual page or use the Manuals+ Deep Search feature to locate specific model variants.
Read the full Q&A page
Reply
Anonymous says:

December 5, 2024 at 5:51 pm
how can I change sec from male to female on my new watch?
Anonymous asks how can I change sec from male to female on my new watch?

Manuals+ clarified question

Question

How do I change the gender setting from male to female in the Da Fit app?
Answer

To change your gender from male to female, you must update your profile settings within the Da Fit app on your smartphone. Follow these steps:

Open the Da Fit app on your phone.

Tap on the User icon (usually the profile/person icon located at the bottom right of the screen).

Tap on your Profile or User Profile at the top.

Find the Gender field and select Female.

Make sure to save your changes or tap the checkmark/back button to ensure the data syncs to your watch.

Once updated in the app, the information should automatically synchronize with your watch the next time it connects via Bluetooth.
Read the full Q&A page
Reply
Daubigney says:

April 25, 2026 at 12:13 pm
comment modifier les objectifs dans l’app Da Fit. Merci
Daubigney asks comment modifier les objectifs dans l'app Da Fit. Merci

Manuals+ clarified question

Question

How do I change goals in the Da Fit app?
Answer

To change your activity goals (such as step count) in the Da Fit app, please follow these steps:

Open the Da Fit app on your smartphone.

Tap on the Profile icon (usually the person icon on the far right of the bottom navigation bar).

Look for a section labeled Goal or Step Goal.

Tap on the current goal value to open the adjustment menu.

Scroll or type to select your new target (e.g., 8,000 or 10,000 steps) and tap Done or Save.

Note: Ensure your watch is synced via Bluetooth after making changes to ensure the new goal is reflected on your wearable device.
Read the full Q&A page
Reply