Apps Aranet4 App
User Guide
How to pair Aranet4 to my smart device using the Aranet4 app
Download the Aranet4 app and connect your smartphone to the Aranet4 device via Bluetooth* to:
Access real-time measurement data.
Store up to 14-day measurement history and export it as a CSV file.
Track atmospheric pressure data.
Adjust CO² thresholds and set the buzzer.
Change sensor measurement interval.
Access all nearby Aranet4 devices.
Carry out the CO² calibration of the device.
Activate firmware updates for the Aranet4 devices.
Enable Aranet4 connection to Homey smart home system.
Display Aranet4 measurements on larger TV screens.
To connect your Aranet4 to your smart device, make sure Bluetooth connectivity is enabled on your mobile device and your Aranet4 monitor, and follow these steps:
- Launch the Aranet4 app.
- Add Aranet4 to the app by pressing “+ PAIR NEW DEVICE” button.
- Select the necessary Aranet4 from the devices list and press “+ PAIR”.
- Accept the pairing procedure.
- Enter the 6-digit pin code that is shown on the display of your Aranet4 device.
We advise you to check the app for Aranet4 newest firmware versions regularly and use the offered upgrades.
Aranet4 App is currently available on iOS and Android devices. Requires Android 8.1 or newer / iOS 13.0 or newer
Find out more about the Aranet4 app in forum.aranet.com/all-about-aranet4
* Access to the device’s location should be allowed because of the general requirement for Bluetooth apps to work correctly on Android OS.
Documents / Resources
 |
Apps Aranet4 App [pdf] User Guide Aranet4, App, Aranet4 App |
