Instructions
365Cam App
Press and hold ON, the blue light is turned on, the red light is charging, and the battery is fully charged.
The blue light flashing is a connection failure, and the WiFi password is wrong. Press the MODE(reset) key for 5 seconds to restore the factory settings.
Download and install the APP
Open the phone’s WiFi settings, find the WiFi of “EEE …” and connect it.
Note: You can’t switch to other networks. Be sure to stay connected to this network.
Open APP real-time monitoring
This step is to set up a remote relay for close monitoring without network if there is WiFi.
Continue to click Settings to proceed to the next step. [No Internet, click here to watch online]
Find the WiFi at home and enter the password.
Wait one minute for the device to display online, and then you can monitor it in real time.
Documents / Resources
 |
Apps 365Cam App [pdf] Instructions 365Cam App, App |