Apitor Robot J APR021 SuperBot
Download and Install the APP
- Search “Apitor Kit” in the Apple App Store and Google Play to download the APP, or scan the QR code to download.
- When installing the APP, please allow all permission requests and enable “Location services” for Android required by the Bluetooth protocol.
- System requirements: Android 8 or higher, iOS 10 or higher, Bluetooth 4 or higher.
Control Module
- Control Module: This component receives, processes, and executes commands. It controls motor rotation and LED light color. It also houses the battery and power switch.
- Motors: These are the driving forces behind the robot’s movements and actions. They enable movement, rotation, and other functionalities. The
- Robot J/R includes 2 motors each (labeled as M1 and M2 on the main controller and referenced in programming).
- LED Lights: These lights offer seven colors (red, orange, yellow, green, indigo, blue, and violet) and can be programmed to display various flashing modes.
- They add visual effects and fun to creative projects. The Robot J/R includes 2 LED lights each (labeled as L1 and L2 on the main controller and referenced in programming).
- Bluetooth frequency: 2402-2480MHz, transmitting power < OdBm.
- Hereby, Apitor Technology Co., Ltd. declares that the radio equipment type APRO21/APR022 complies with
- Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.apitor.com/conformity.
- The instruction manual must be retained since it contains important information.
Battery Installation
Instructions for Battery Installation
- Non-rechargeable batteries can not be charged.
- Rechargeable batteries should be charged under the supervision of an adult.
- Batteries with different models, old and new batteries should not be mixed.
- Exhausted batteries should be removed from the product.
- This product does not contain a battery.
- Rechargeable batteries are to be removed from the toy before being charged.
- Batteries are to be inserted with correct polarity.
- The supply terminals are not to be short-circuited.
Connect to Apitor Robot
- Short press the power the button of the control module. The LED lights will flash blue every 1 second.
- Enable your tablet/smartphone’s Bluetooth and bring your tablet/smartphone close to the control module.
- Open the “Apitor Kit” APP, click the pairing button, follow a few steps, the the pairing will be completed automatically.
Please don’t connect to Apitor Robot directly from the Bluetooth connection page of your tablet/smartphone. Please remember, always connect Apitor Robot from the “Apitor Kit” APP.
LED Status Indication
Documents / Resources
 |
Apitor Robot J APR021 SuperBot [pdf] User Guide R02R, 2AS4DR02R, Robot J APR021 SuperBot, Robot J APR021, SuperBot |