APEX WAVES RMC-8354 External Controller for PXI
Product Information
The NI RMC-8354 DVD R/W is a device designed for reading and writing DVDs. It is compatible with the NI RMC-8354 chassis and comes with the necessary components for installation.
Product Usage Instructions
- Remove the top cover of the NI RMC-8354.
- Disconnect the SATA power and data connectors from the installed DVD ROM. Use the ejector handle to push the DVD ROM out of the chassis.
- Detach the two brackets from the DVD ROM and attach them to the DVD R/W.
- Remove the CDM-USATA-G board from the back of the DVD ROM and attach it to the DVD R/W.
- Insert the DVD R/W into the chassis and connect the SATA power and data cables.
- Replace the top cover of the NI RMC-8354.
Please follow these steps carefully to ensure proper installation of the NI RMC-8354 DVD R/W. For further assistance, refer to the installation guide or contact our customer support.
COMPREHENSIVE SERVICES
- We offer competitive repair and calibration services, as well as easily accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
- We buy new, used, decommissioned, and surplus parts from every NI series.
- We work out the best solution to suit vour individual needs.
Sell For Cash- Get Credit
- Receive a Trade-In Deal
INSTALLATION GUIDE
NI RMC-8354 DVD R/W
- This guide explains how to install the NI RMC-8354 DVD R/W.
- Follow these steps to install the NI RMC-8354 DVD R/W:
- Remove the NI RMC-8354 top cover.
- Remove the DVD ROM installed in the NI RMC-8354 by disconnecting the SATA power and data connectors and ejecting the DVD ROM from the chassis by pushing the ejector handle to the left and forward, as shown below.
- SATA Power
- SATA Data
- Ejector Handle
- Remove the two brackets shown below from the DVD ROM and attach them to the DVD R/W.
- Bracket 1
- Bracket 2
- Remove the CDM-USATA-G board shown below from the back of the DVD ROM and attach it to the DVD R/W.
- CDM-USATA-G Board.
- Insert the DVD R/W into the chassis and connect the SATA power and data cables.
- Replace the NI RMC-8354 top cover.
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy.
© 2011 National Instruments Corporation. All rights reserved.
Documents / Resources
 |
APEX WAVES RMC-8354 External Controller for PXI [pdf] Installation Guide RMC-8354 External Controller for PXI, RMC-8354, External Controller for PXI, External Controller, Controller |