AOEXO XF SkyShield Quad Spectrum Fusion Gimbal
Product Usage Instructions
- Visible Light Camera Usage:
To use the visible light camera, power on the device and select the desired mode (video or photo). - Thermal Imaging Camera Usage:
Power on the thermal imaging camera separately and adjust the settings for optimal thermal imaging performance. - General Operating Instructions:
- Ensure proper calibration and focus adjustment for both cameras before use.
- Follow safety guidelines and regulations when operating the device.
- Maintenance:
Regularly clean the camera lenses and protect the device from dust and moisture. - Storage:
Store the device in a cool, dry place away from direct sunlight when not in use.
Core Technological Innovations
[AOEXO Multi-Spectrum Fusion Platform]
- Pioneering “Optical-Thermal-Range-Illumination” 4D sensing architecture (Synergy 4.0 patented algorithm)
- Real-time calibration of visible/thermal/laser ranging tri-source data: 70%target positioning accuracy improvement
- Smart spectrum switching strategies (auto/manual/preset modes)
[AOEXO Beyond-Visual-Range Combat System]
- Tactical-grade laser rangefinder module (1,800m ultra-range detection + positioning optimization)
- Dual-mode laser illumination (8°/30° smart switching: 300% night recognition range enhancement)
- Military-grade thermal calibration (-20~550℃ wide-range measurement,±1℃ industrial accuracy)
[AOEXO Enhanced Features]
[Smart Perception Hub] AOEXO HyperZoom Optical System
- 30x optical + 4x digital zoom (120x hybrid magnification)
- 2.07MP starlight-grade sensor (0.005Lux low-light imaging)
- Dynamic focus compensation (60°~2.3° FOV distortion-free switching)
[Military-Grade Stabilization Platform]
- AOEXO 4th-gen three-axis stabilization (±0.01° anti-shock accuracy)
- Intelligent power management (dual-redundant circuits + surge protection)
- MIL-STD quick-release interface (3-second module swapping)
[AOEXO Intelligent Control Ecosystem]
- Deep integration with BattleSpace Pro Command System
- Quad-spectrum PIP/POP/fusion display modes
- Smart threat assessment (thermal tracking + laser ranging synergy)
- Tamper-proof datalink (military-encrypted OSD/EXIF)
- QGC Tactical Pro Suite (AOEXO Combat Edition)
- Multi-spectrum mission preset library
- Real-time thermal mapping module
Technical Specifications
Visible Light Camera
- Sensor Size 1/2.8″ CMOS
- Total Pixels 2.07MP
- Video Resolution 1080P@30fps
- Photo Resolution 1920×1080
- Optical Zoom f=4.7–141mm
- Optical Magnification 30×
- Digital Magnification 4×
- Field of View (FOV) H: 60°–2.3°, V: 36.9°–1.3°, D: 68.4°–2.6°
- Detection Distance Human: 2,128.2m; Vehicle: 2,797.1m
- Recognition Distance Human: 425.6m; Vehicle: 559.4m
- Verification Distance Human: 212.8m; Vehicle: 279.7m
- Minimum Illumination Color: 0.05Lux/F1.6; B&W: 0.005Lux/F1.6
Thermal Imaging Camera
- Detector Type Uncooled Vanadium Oxide (VOx) Infrared Focal Plane
- Detector
- Pixel Pitch 12μm
- NETD <50mK (@25°C, f/1.0)
- Palette Modes White Hot, Black Hot, etc.
- Resolution 640×512
- Frame Rate 640×512@25fps
- Focal Length 25mm
- FOV H:17.5°, V:14°, D:22.3°
- Detection Distance Human:1,041.7m; Vehicle:3,194.4m
- Recognition
- Distance Human:260.4m; Vehicle:798.6m
- Verification
- Distance Human:130.2m; Vehicle:399.3m
- Spectral Range 8–14μm
- Temperature
- Ranges Range 1: -20~150°C; Range 2: 0~550°C
- Measurement
- Tools Point/Line/Area Analysis
- Accuracy ±3°C or ±3% of reading (whichever is larger) @- 20~60°C
- Temperature OSD Max/Min/Center/Average Display
- Auto Tracking High/Low Temp Marking (Red/Blue Frames)
Laser Rangefinder
- Parameter Specification
- Wavelength 905nm
- Range 5–1,800m (12m target, 20% reflectivity)
- Accuracy ±0.3m (<300m)/±1m (>300m)
- Beam Divergence 2.5mrad
- Operation Mode Pulsed
- Power <1mW (Eye-safe)
Laser Illuminator
- Parameter Specification
- Wavelength 850±10nm
- Effective Range ≤500m
- Beam Angles 8° + 30°
- Safety Class FDA Class 3B / IEC-60825-1
Video Specifications
- Parameter Specification
- Single IP Output Supported
- Video Switching Supported
- Compression H.265/H.264/H.264H
- Storage TF Card (Max 256GB)
- Protocols ONVIF, GB/T28181, HTTP, RTSP, TCP, UDP, RTP
Gimbal Specifications
- Stabilization Accuracy ±0.01°
- Max Rotation Speed Pan/Tilt: ±200°/s
- Controllable Range Pan: ±360° Continuous; Tilt: -120°~+60°
System Specifications
- Operating Temperature -20℃ ~ 60℃
- Storage Temperature -20℃ ~ 60℃
- Humidity ≤85% RH (Non-condensing)
- Protection Rating IP43
- Dimensions 173×144×206mm
- Weight 1,110g
- Power Consumption 16.5W (Avg)/60W (Peak)
FAQs
Q: What is the maximum detection distance of the visible light camera?
A: The maximum detection distance for humans is 212.8m, and for vehicles is 279.7m.
Q: How should I adjust the thermal imaging camera settings for accurate results?
A: Adjust the focal length and temperature ranges according to your specific needs for accurate thermal imaging.
Q: Can I use both cameras simultaneously?
A: Yes, you can use both the visible light camera and the thermal imaging camera simultaneously for enhanced surveillance capabilities.
Documents / Resources
 |
AOEXO XF SkyShield Quad Spectrum Fusion Gimbal [pdf] User Manual XF Platform, XF SkyShield Quad Spectrum Fusion Gimbal, XF, SkyShield Quad Spectrum Fusion Gimbal, Quad Spectrum Fusion Gimbal, Spectrum Fusion Gimbal, Fusion Gimbal, Gimbal |