For Picture shooting

1. Set Camera Bluetooth function into “Remote”.
2. When PAIRING Screen appears, hold the W and T buttons on the remote for at least 3 seconds to pair.
3. Set the camera drive mode into “ten seconds Remote”.
4. Set the remote into immediate release.
   

   For Video Shooting

5. Set the camera into video mode.
6. Set the camera’s remote control into enable.
7. Set the remote to into movie shooting.

Documents / Resources

AODELAN R6 Camera Remote Control [pdf] Instruction Manual R6 Camera Remote Control, R6, Camera Remote Control, Remote Control, Control

References

• User Manual