Aodehong S9 Multi Function Wireless Charger

INTRODUCTION

• This product is a multifunctional wireless charger, featuring a smart chip that supports simultaneous charging for three devices: mobile phones, smart watches, and earphones.
• It boasts an interesting hidden design for charging watches and earphones, and a magnetic suction that automatically rotates the phone charging position, serving as a phone holder.
• With its high efficiency, stable performance, and instant charging capabilities, you can easily enjoy the convenience of\ wireless charging technology. Additionally, it supports wireless charging for other electronic devices that comply with the Qi standard.

OVERVEIW

Product Features

Button Function

• Mobile phone charger rotary button: Touch this button to rotate the phone charging area counterclockwise by 90 degrees; Touch this button again to rotate clockwise 90 ° and return to the original position.
• Show button: Touch this button to slowly extend the watch and earphone charger; Touch this button again, and they will slowly shrink to hide.

Phone Charging Decorative Light

• Mobile phone charging indicator light: When the power is plugged in, the light turns on for 1 second and then turns off; when a phone is placed on the charger and charging begins, the indicator light turns on for 1 minute and then turns off.

Product Parameters

• Model: S9
• Input: QC/PD 3A Min
• Output: 5W/7.5W/1 OW/15W (Smart Phone)
• Output: 5W (Earbuds)
• Qi2.0 Output: 5W (Smart Watch)
• FCC D: 2APQD-S91
• QI ID: 23419
• Size: 86x86x124mm
• Materials: ABS+PC
• Charging Distance: 3-6mm
• Operating Frequency:
  • Earbuds 115-205kHz
  • Watch 300-350kHz
  • Phone 1 15-205kHz(5W/7.5W/1 OW), 360kHz(15W)

Cautions

1. Please do not pull the power cord strongly to avoid the power cord breaking or falling off.
2. Do not disassemble or put into fire or water to avoid short circuit and leakage.
3. Do not use the product in severe heat, humidity, or corrosive environments to avoid damage to the circuit and leakage.
4. Please do not let children play to avoid unnecessary accidents
5. When using fast charging, please use a qualified QC3.0 charging power adapter and fast charging cable; otherwise, it may cause charging instability.
6. Please do not put metal debris or magnetic cards on the charging board, which may cause damage or abnormalities to the charger.
7. If you encounter the receiving coil or transmitting board overheating during use, resulting in stopping charging, please remove the charging product, wait for it to cool down, and then try charging again..

Compatibility

1. Smart Phone
   1. For iPhone16、iPhone16 Pro、iPhone16 Pro Max、16 Plus
   2. iPhone15、iPhone15 Pro、iPhone15 Pro Max、15 Plus
   3. iPhone 14、iPhone 14 Pro、iPhone 14 Pro Max、iPhone 14 Plus
   4. iPhone 13、iPhone 13 Pro、iPhone 13 Pro Max、iPhone 13 mini
   5. iPhone 12、iPhone 12 Pro、iPhone 12 Pro Max、iPhone 12 mini
   6. iPhone SE (2 Generation)
      (Note: Magnetic charging of cell phones is only applicable to iPhone 12/13/14/15/16 series)
2. Smart Watch
   1. For Apple Watch Ultra / Ultra2 / SE / 10 / 9 / 8 / 7 / 6 / 5 / 4 / 3 / 2 Series
   2. For Galaxy Watch 2(40mm) / Galaxy Watch 3(45mm) / Galaxy Watch 4(40/41/44/46mm)
   3. / Galaxy Watch 5(44mm) / Galaxy Watch 6(40/44mm) / Galaxy Watch 6 Classic(47mm)
   4. / Galaxy Watch 7 Ultra(47mm) / Galaxy Watch FE(40mm) / Galaxy Watch Active(40mm)
   5. (Note: Apple Watch and Galaxy Watch have compatibility differences in certain system environments. Specifically, in some systems, the two may not be compatible with each other, while in other systems, they can be compatible. For detailed compatibility information and technical support, please consult official customer service.)
3. Earbuds
   1. For AirPods 2 (with wireless case) / AirPods pro / AirPods pro2 / AirPods 3 / AirPods 4 (can work with A3059, A2968, A2700, A2566, A2190, A1938 AirPods case； Does not support AirPods charging case: A3058, A2897, A1602); Samsung Galaxy Buds, Buds+, Buds Pro, Buds Live; Soundcore Liberty Air 2, Air 2 Pro, 2 Pro (All TWS earphones with wireless charging)
      Note: Adapt to all devices that support wireless charging.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated at a minimum distance of 20cm from the radiator to your body.

FAQ