Q27U3 Cv Monitor
“
Specifications
- Power Source: 100-240V AC, Min. 5A
- Plug Type: Three-pronged grounded plug
- Recommended Ventilation Space: 4 inches (10cm) around the
monitor
Product Usage Instructions
Safety
1. The monitor should only be operated from the specified power
source mentioned on the label. If unsure, consult your dealer or
local power company.
2. Use a three-pronged grounded plug and ensure it is connected
to a grounded power outlet for safety.
3. Unplug the monitor during lightning storms or long periods of
inactivity to prevent damage from power surges.
4. Avoid overloading power strips and extension cords to prevent
fire or electric shock.
Installation
1. Do not place the monitor on an unstable surface to prevent
injuries and product damage.
2. Avoid inserting objects into the monitor slot or spilling
liquids on the device.
3. Ensure proper ventilation space around the monitor to prevent
overheating and potential fire hazards.
4. If wall-mounting, use an approved mounting kit and follow
manufacturer instructions.
Cleaning
1. Clean the monitor cabinet regularly with a water-dampened,
soft cloth.
2. Use a soft cotton or microfiber cloth and ensure it is almost
dry to prevent liquid damage.
3. Disconnect the power cord before cleaning the product.
Frequently Asked Questions (FAQ)
Q: Can I use any power source for the monitor?
A: No, the monitor should only be operated from the specified
power source mentioned on the label to avoid damage.
Q: How should I clean the monitor?
A: Clean the monitor cabinet regularly with a water-dampened,
soft cloth. Ensure the cloth is almost dry and disconnect the power
cord before cleaning.
“`
1
Safety ……………………………………………………………………………………………………………………………………………………………………..1 National Conventions …………………………………………………………………………………………………………………………………..1 Power…………………………………………………………………………………………………………………………………………………………..2 Installation …………………………………………………………………………………………………………………………………………………..3 Cleaning……………………………………………………………………………………………………………………………………………………….4 Other……………………………………………………………………………………………………………………………………………………………5
Setup ……………………………………………………………………………………………………………………………………………………………………..6 Contents in Box ……………………………………………………………………………………………………………………………………………6 Set-up Stand & Base …………………………………………………………………………………………………………………………………….7 Adjusting Viewing Angle ……………………………………………………………………………………………………………………………….8 Connecting the Monitor ……………………………………………………………………………………………………………………………….9 Wall Mounting ………………………………………………………………………………………………………………………………………….. 10 Adaptive-Sync function……………………………………………………………………………………………………………………………… 11 HDR………………………………………………………………………………………………………………………………………………………….. 12 Calman Ready…………………………………………………………………………………………………………………………………………… 13
Adjusting …………………………………………………………………………………………………………………………………………………………….. 16 Hotkeys…………………………………………………………………………………………………………………………………………………….. 16 OSD Setting………………………………………………………………………………………………………………………………………………. 17 Preset Mode…………………………………………………………………………………………………………………………………… 18 HDR ……………………………………………………………………………………………………………………………………………….. 19 Picture……………………………………………………………………………………………………………………………………………. 20 Input………………………………………………………………………………………………………………………………………………. 22 Settings ………………………………………………………………………………………………………………………………………….. 23 OSD Setup ……………………………………………………………………………………………………………………………………… 24 Information ……………………………………………………………………………………………………………………………………. 25 LED Indicator ……………………………………………………………………………………………………………………………………………. 26
Troubleshoot ………………………………………………………………………………………………………………………………………………………. 27 Specification ……………………………………………………………………………………………………………………………………………………….. 28
General Specification………………………………………………………………………………………………………………………………… 28 Preset Display Modes ……………………………………………………………………………………………………………………………….. 29 Pin Assignments……………………………………………………………………………………………………………………………………….. 30 Plug and Play ……………………………………………………………………………………………………………………………………………. 31
i
Safety
National Conventions
The following subsections describe national conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.
1
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock. To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A. The wall socket shall be installed near the equipment and shall be easily accessible.
2
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor.
To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:
Installed with stand
12 inches 30cm
4 inches 10cm
4 inches 10cm
Leave at least this much space around the set
4 inches 10cm
3
Cleaning
Clean the cabinet regularly with a water-dampened, soft cloth. When cleaning use a soft cotton or microfiber cloth. The cloth should be damp and almost dry, do not allow liquid into the case. Please disconnect the power cord before cleaning the product.
4
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation. The power cords shall be safety approved. For Germany, it shall be H03VV-F, 3G, 0.75 mm2, or better. For other countries, the suitable types shall be used accordingly. Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level.
5
Setup
Contents in Box
Monitor
*
*
Quick Start Guide Warranty Card
Stand
Base
Screwdriver
*
*
*
*
Power Cable HDMI Cable DisplayPort USB C-C Cable USB C-C/A Cable Cable
Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
6
Set-up Stand & Base
Please setup or remove the base following the steps as below. Setup:
2
3 1
Note: Align the stand with the positioning holes in the base. Hold the stand and base without gaps and lock the two screws at the bottom before releasing the support to prevent it from falling.
Remove:
1 3
2 4
Specification for base screw: M5*21 mm (effective thread 5.5 mm)
NOTE: Display design may differ from those illustrated.
7
Adjusting Viewing Angle
To achieve the best viewing experience, it is recommended that the user can make sure they are able to look at their whole face on the screen, then adjust the monitor’s angle based on personal preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle. You are able to adjust the monitor as below:
-6.5º 23º
+- 30°
+- 30°
+- 90°
+- 90°
150mm
NOTE: Do not touch the LCD screen when you change the angle. Touching the LCD screen may cause damage.
Warning · To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by
more than -5 degrees. · Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
8
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
9 10 11 12
13 24
5 67 8
1. Power Switch 2. Power 3. HDMI 4. DP IN 5. USB C (Video, PD 96W) 6. DP OUT 7. USB3.2 Gen1 8. RJ45 (network connector) 9. Earphone 10. USB C (Power supply up to 15W) 11. USB3.2 Gen1 12. USB3.2 Gen1 downstream+charging
Connect to PC
1. Connect the power cord to the back of the display firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the display signal cable to the video connector on the back of your computer. 4. Plug the power cord of your computer and your display into a nearby outlet. 5. Turn on your computer and display. If your monitor displays an image, installation is complete. If it does not display an image, please refer to Troubleshoot.
To protect equipment, always turn off the PC and LCD monitor before connecting.
9
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
1 3
2 4
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps: 1. Remove the base. 2. Follow the manufacturer’s instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the
back of the monitor. 4. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions
on attaching it to the wall.
100mm
100mm
M4
Specification of wall hanger screws: M4*(10+X)mm (X=Thickness of Wall mount bracket) M=4.0Max
D3.86-3.96
Dk=8.0
H=2.0
M4-P0.7 L=10+X
Note: VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. Always contact manufacturer for wall-mount installation.
* Display design may differ from those illustrated. WARNING:
1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
10
Adaptive-Sync function
1. Adaptive-Sync function works with DP/HDMI/USB C 1). Compatible Graphics Card: Recommended list is as below, also could be checked by visiting www.AMD.com Graphics Cards
· RadeonTM RX Vega series · RadeonTM RX 500 series · RadeonTM RX 400 series · RadeonTM R9/R7 300 series R9 370/X, R7 370/X, R7 265 except · RadeonTM Pro Duo (2016) · RadeonTM R9 Nano series · RadeonTM R9 Fury series · RadeonTM R9/R7 200 series (R9 270/X, R9 280/X except) Processors
· AMD RyzenTM 7 2700U · AMD RyzenTM 5 2500U · AMD RyzenTM 5 2400G · AMD RyzenTM 3 2300U · AMD RyzenTM 3 2200G · AMD PRO A12-9800 · AMD PRO A12-9800E · AMD PRO A10-9700 · AMD PRO A10-9700E · AMD PRO A8-9600 · AMD PRO A6-9500 · AMD PRO A6-9500E · AMD PRO A12-8870 · AMD PRO A12-8870E · AMD PRO A10-8770 · AMD PRO A10-8770E · AMD PRO A10-8750B · AMD PRO A8-8650B · AMD PRO A6-8570 · AMD PRO A6-8570E · AMD PRO A4-8350B · AMD A10-7890K · AMD A10-7870K · AMD A10-7850K · AMD A10-7800 · AMD A10-7700K · AMD A8-7670K · AMD A8-7650K · AMD A8-7600 · AMD A6-7400K
11
HDR
It is compatible with input signals in HDR10 format. The display may automatically activate the HDR function if the player and content are compatible. Please contact the device manufacturer and the content provider for information on the compatibility of your device and content. Please select “OFF” for the HDR function when you have no need for automatical activation function. Note: 1. No special setting is needed for the DisplayPort/HDMI interface in WIN10 versions lower (older) than V1703. 2. Only the HDMI interface is available and the DisplayPort interface cannot function in WIN10 version V1703. 3. Display Setting: a. The display resolution is set to 2560*1440, and HDR is preset to ON. b. After entering an application, the best HDR effect can be achieved when the resolution is changed to 2560*1440
(if available).
12
Calman Ready
Calman Ready displays and devices are equipped with the ability to communicate directly with Portrait Displays’ Calman® color calibration software. Devices that are Calman Ready can quickly connect with the software and leverage its precise and automated calibration capabilities (AutoCalTM). Calman Ready allows for easy, precise and quick calibrations with your brand-new AOC display. How to enable Calman Ready? Calman Required Version: Calman (Ultimate or Studio) Version 5.15.5.19 or later Required Hardware Calman Compatible Pattern Generator *External HDR capable generator required for HDR calibration Calman Compatible Meter For information see : Calman Compatible Meters Scan the following QR code to open the AOC Monitor Calibration Workflow Guide for instructions on calibrating compatible AOC Calman Ready monitors:
Note: Once calibration is complete, the calibration will be stored in the monitor OSD under the Picture CMR Color Space. [NOTE: MOST CALMAN USERS ARE FAMILIAR WITH THE FOLLOWING INSTRUCTIONS SO WOULD SUGGEST THAT YOU CONSIDER THIS OPTIONAL FOR THE MANUAL]
13
Step 1: Install your Calman software.
14
Step 2: Enter your License ID and License Password, then click on the Activate Online button to activate your Calman license.
Step 3: 1. Connect the laptop to the monitor’s USB-C (bottom). 2. Connect a color meter to the laptop. 3. Open Calman and scan the following QR code to open the AOC Monitor Calibration Walkthrough Guide for instructions on calibrating compatible AOC Calman Ready monitors:
Note: Once calibration is complete, the calibration will be stored in the monitor OSD under the Picture CMR Color Space.
15
Adjusting
Hotkeys
1 234 5
1 Source/Exit 2 Preset Mode/HDR 3 Brightness 4 Menu/Enter 5 Power Menu/Enter Press to display the OSD or confirm the selection. Power Press the Power button to turn on the monitor. Brightness When there is no OSD, press ” ” key to open brightness function, then press ” ” or ” ” key to adjustment backlight. Preset Mode/HDR When there is no OSD, press ” ” key to open preset mode/HDR function, then press ” ” or ” ” key to choose different mode. Source/Exit When the OSD is closed, press Source/Exit button will be Source hot key function. When the OSD menu is active, this button acts as an exit key (to exit the OSD menu).
16
OSD Setting
Basic and simple instruction on the control keys.
BRIGHTNESS 70 Preset Mode
PICTURE PRESET Standard
Picture
Input
Settings OSD Setup Information
PRESET COLOR SPACE Panel Native
Standard Text
Reading Internet
Movie Sports
HDR SDR
RESOLUTION 2560×1440
PD: 96W (max.)
1). Press the MENU-button to activate the OSD window.
2). Press or to navigate through the functions. Once the desired function is highlighted, press the MENUbutton to activate it, press or to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it.
3). Press or to change the settings of the selected function. Press function, repeat steps 2-3.
to exit. If you want to adjust any other
4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then press power button to turn the monitor on. To unlock the OSD – press and hold the MENU-button while the monitor is off and then press power button to turn the monitor on.
Notes: If the input signal resolution is the native resolution or Adaptive-Sync, then the item “Image Ratio” is invalid.
17
Preset Mode
BRIGHTNESS 70 Preset Mode
PICTURE PRESET Standard
Picture
Input
Settings OSD Setup Information
PRESET COLOR SPACE Panel Native
Standard Text
Reading Internet
Movie Sports
PD: 96W (max.)
HDR SDR
RESOLUTION 2560×1440
Preset Mode
Standard Text Reading Internet Movie Sports Photographer HDR Picture HDR Movie HDR Game FPS RTS Racing D-Mode Uniformity Reset color
Standard Mode Text Mode Reading Mode Internet Mode Movie Mode Sports Mode Photographer Mode HDR Picture Mode HDR Movie Mode HDR Game Mode FPS Mode RTS Mode Racing Mode D-Mode Mode Uniformity Mode Yes / No Note: Resets the color settings to the factory defaults.
18
HDR
BRIGHTNESS 100 HDR Picture Input
PICTURE PRESET DisplayHDR
Settings OSD Setup Information
PRESET COLOR SPACE Rec. 2020
Off DisplayHDR HDR Picture HDR Movie HDR Game
HDR HDR
RESOLUTION 2560×1440
PD: 96W (max.)
HDR
Off DisplayHDR HDR Picture HDR Movie HDR Game
While receive HDR signal, Set the HDR profile according to your usage requirements. Note: When HDR is detected, the HDR option is displayed for adjustment.
19
Picture
BRIGHTNESS 70
Preset Mode Picture Input Settings
OSD Setup Information
PICTURE PRESET Standard
PRESET COLOR SPACE Panel Native
Brightness Contrast Sharpness
Gamma Color Temp.
Red
PD: 96W (max.)
HDR SDR
RESOLUTION 2560×1440
Brightness Contrast Sharpness Gamma
Color Temp.
Red Green Blue Saturation Hue
Color Space
CMR Color Space
HDR Color Space DCR Local Dimming
0-100
Backlight Adjustment
0-100
Contrast from Digital-register.
0-100
Adjust Sharpness.
1.8 / 2.0 / 2.2 / 2.4 / 2.6
Native / 5000K / 6500K / 7500K / 8200K / 9300K / 11500K / User define
0-100
Adjust to Gamma
Adjust Color Temp. Note: Select User define to adjust RGB colors.
Red gain from Digital-register.
0-100
Green gain from Digital-register.
0-100
Blue gain from Digital-register.
R / G / B / C / M / Y
Adjustment 0-100.
R / G / B / C / M / Y
Panel Native / sRGB / Display-P3 / DCI-P3 / DCI-P3 (D50) / Adobe RGB / Adobe RGB (D50) / Rec. 2020 / Rec. 709 sRGB / Display-P3 / DCI-P3 / DCI-P3 (D50) / Adobe RGB / Adobe RGB (D50) / Rec. 2020 / Rec. 709 / Custom Mode DCI-P3 / Rec. 2020 / CMR DCI-P3 / CMR Rec. 2020
Off / On
Off / On
Adjustment 0-100.
Adjust Color Space.
Adjust CMR Color Space. Note: Applies the calibration result optimized by CalMAN software.
Adjust HDR Color Space. Disable or Enable dynamic contrast ratio. Disable or Enable Local Dimming. Note: Local Dimming is disable under SDR signal and is in default On HDR signal.
20
Clear Vision
Lowblue Mode
Image Ratio
Off / Weak / Medium / Strong Off / Multimedia / Internet / Office / Reading
Full / Aspect / 1:1
Adjust Clear Vision. Decrease blue light wave by controlling color temperature. Select image ratio for display.
Over Scan
Off / On
Decrease blue light wave by controlling color temperature.
Shadow Boost
Shadow Control
Game Color AdaptiveSync Overdrive
Off / Level 10 / Level 20 / Level 30
0 ~ 100
0 ~ 20
Enhance the screen details in the dark or bright area to adjust the brightness in the bright area and ensure that it is not oversaturated. Shadow Control Default is 50, then end-user can adjust from 50 to 100 or 0 to increase contrast for clear picture. 1. If picture is too dark to be saw the detail clearly, adjusting from
50 to100 for clear picture. 2. If picture is too white to be saw the detail clearly, adjusting from
50 to0 for clear picture Game Color will provide 0-20 level for adjusting saturation to get better picture.
Off / On
Disable or Enable Adaptive-Sync.
Off/ Weak/ Medium/ Strong
Adjust the response time.
Low Input Lag Off / On
Turn off frame buffer to decrease input lag
Note: When the Local Dimming function is activated, due to the light diffusion effect. The edges of windows or the edges of moving objects there will be a slight halo phenomenon. This is the physical characteristics of the LED panel is not a panel failure phenomenon, please rest assured to continue using.
21
Input
BRIGHTNESS 70
Preset Mode Picture Input Settings
OSD Setup Information
PICTURE PRESET Standard
PRESET COLOR SPACE Panel Native
Auto Source HDMI
DisplayPort USB C
HDR SDR
RESOLUTION 2560×1440
PD: 96W (max.)
Input
Auto Source HDMI DisplayPort USB C
Select Off / On to Disable/Enable Auto Source. Select Input Signal Source.
22
Settings
BRIGHTNESS 70
PICTURE PRESET Standard
PRESET COLOR SPACE Panel Native
Preset Mode Picture Input Settings
OSD Setup Information
Language USB-C
USB Standby Mode Daisy Chain Smart Power DPS
PD: 96W (max.)
HDR SDR
RESOLUTION 2560×1440
Language USB C USB Standby Mode Daisy Chain SmartPower DPS Break Reminder Off Timer (hr) DDC/CI Volume Mute Resolution Notice Reset
High Data Speed/High Resolution Off / On Off/Extend/Clone Off /On Off /On Off /On 0-24 No / Yes 0-100 Off / On Off / On No / ENERGY STAR ®
Select the OSD language. Select the USB C mode. Turn On/Off USB Standby Mode. Select the daisy chain mode. Turn On/Off SmartPower. Turn On/Off Resolution Notice. Break reminder if the user continuously work for more than 1hrs Select DC Off time. Turn ON/OFF DDC/CI Support Volume Adjustment. Mute the volume. Turn On/Off Resolution Notice. eset the menu to default
23
OSD Setup
BRIGHTNESS 70
PICTURE PRESET Standard
PRESET COLOR SPACE Panel Native
Preset Mode Picture Input Settings
OSD Setup Information
Transparence H. Position V. Position OSD Timeout
PD: 96W (max.)
HDR SDR
Transparence H. Position V. Position OSD Timeout
0-100 0-100 0-100 5-120
Adjust the transparence of OSD. Adjust the horizontal position of OSD. Adjust the vertical position of OSD. Adjust the OSD Timeout.
RESOLUTION 2560×1440
24
Information
BRIGHTNESS 70
PICTURE PRESET Standard
PRESET COLOR SPACE Panel Native
Preset Mode Picture Input Settings
OSD Setup Information
Input Resolution Brightness Color Space Gamma White Point
DisplayPort 2560×1440@60Hz
70 Panel Native
2.2 6500K
PD: 96W (max.)
HDR SDR
RESOLUTION 2560×1440
SN
0000000000000
FW Version
V005
HDR
SDR
Firmware Date
20231211
HBR2/HBR3
NA
Sync
NA
25
LED Indicator
Status Full Power Mode Active-off Mode
LED Color White Orange
26
Troubleshoot
Problem & Question
Possible Solutions
Power LED Is Not ON
No image on the screen
Picture Is Fuzzy & Has Ghosting Shadowing Problem Picture Bounces, Flickers Or Wave Pattern Appears In The Picture
Monitor Is Stuck In Active Off-Mode”
Missing one of the primary colors (RED, GREEN, or BLUE) Screen image is not centered or sized properly Picture has color defects (white does not look white) Horizontal or vertical disturbances on the screen Regulation & Service
Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor.
Is the power cord connected properly? Check the power cord connection and power supply. Is the video cable connected correctly? (Connected using the HDMI cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection. * HDMI/DP input is not available on every model. If the power is on, reboot the computer to see the initial screen (the login screen.) If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows 7/8/10) and then change the frequency of the video card. (Refer to the Setting the Optimal Resolution) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer. Can you see “Input Not Supported” on the screen? You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back. Move electrical devices that may cause electrical interference as far away from the monitor as possible. Use the maximum refresh rate your monitor is capable of at the resolution you are using. The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor’s video cable is properly connected to the computer. Inspect the monitor’s video cable and make sure no pin is bent. Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. Inspect the monitor’s video cable and make sure that no pin is damaged. Make sure the monitor’s video cable is properly connected to the computer.
Adjust H-Position and V-Position or press hot-key (AUTO).
Adjust RGB color or select desired color temperature.
Use Windows 7/8/10/11 shut-down mode to adjust CLOCK and FOCUS.
Please refer to Regulation & Service Information which is in the manual or www.aoc.com (to find the model you purchase in your country and to find Regulation & Service Information in Support page.
27
Specification
General Specification
Model name
Q27U3CV
Driving system
TFT Color LCD
Panel
Viewable Image Size
68.5 cm diagonal
Pixel pitch
0.2331mm(H) x 0.2331mm(V)
Display Color
16.7M Colors
Horizontal scan range
30k~140kHz (HDMI) 30k~114kHz (DP/USB C)
Horizontal scan Size(Maximum) 596.736mm
Vertical scan range
48~75Hz
Vertical Scan Size(Maximum) 335.664mm
Others
Optimal preset resolution Max resolution
2560×1440@60Hz 2560×1440@75Hz
Plug & Play
VESA DDC2B/CI
Power Source
100-240V~ 50/60Hz 3.0A
Typical(default brightness and contrast)
27W
Power Consumption
Max. (brightness = 100, contrast =100)
185W
Physical Characteristics
Connector Type Signal Cable Type
Standby mode
0.3W
HDMI, DisplayPort (in), DisplayPort (out), RJ-45, USB-C (bottom): video, PD 96W USB-C (side): Power supply up to 15W Earphone, USB-A x4 (include 1 fast charge)
Detachable
Built-In Speaker
3Wx2
Temperature
Operating Non-Operating
0°C~40°C -25°C~55°C
Environmental Humidity
Operating Non-Operating
10%~85% (Non-Condensing) 5%~93% (Non-Condensing)
Altitude
Operating Non-Operating
0m~5000m (0ft~16404ft) 0m~12192m (0ft~40000ft)
28
Preset Display Modes
STANDARD VGA
DOS MODE SVGA
XGA SXGA FHD QHD
RESOLUTION(±1Hz)
640×480@60Hz 640×480@72Hz 640×480@75Hz 640×480@67Hz 720×400@70Hz 800×600@56Hz 800×600@60Hz 800×600@72Hz 800×600@75Hz 832×624@75Hz 1024×768@60Hz 1024×768@70Hz 1024×768@75Hz 1280×1024@60Hz 1280×1024@75Hz 1920×1080@60Hz 2560×1440@60HZ 2560×1440@75HZ
HORIZONTAL FREQUENCY(KHz)
31.469 37.861
37.5 35 31.469 35.156 37.879 48.077 46.875 49.725 48.363 56.476 60.023 63.981 79.976 67.5 88.787 111.066
VERTICAL FREQUENCY(Hz)
59.94 72.809
75 66.667 70.087 56.25 60.317 72.188
75 74.551 60.004 70.069 75.029 60.02 75.025
60 59.951 74.994
Note: According to the VESA standard, there may be a certain error (+/-1Hz) when calculating the refresh rate (field frequency) of different operating systems and graphics cards. In order to improve compatibility, the nominal refresh rate of this product has been rounded off. Please refer to the actual product.
29
Pin Assignments
19-Pin Color Display Signal Cable
Pin No. 1. 2. 3. 4. 5.
Signal Name TMDS Data 2+ TMDS Data 2 Shield TMDS Data 2TMDS Data 1+ TMDS Data 1Shield
6.
TMDS Data 1-
7.
TMDS Data 0+
8.
TMDS Data 0 Shield
Pin No. Signal Name
9.
TMDS Data 0-
10.
TMDS Clock +
11.
TMDS Clock Shield
12.
TMDS Clock-
13.
CEC
Pin No. 17. 18. 19.
14.
Reserved (N.C. on device)
15.
SCL
16.
SDA
Signal Name DDC/CEC Ground +5V Power Hot Plug Detect
20-Pin Color Display Signal Cable
Pin No. 1 2 3 4 5 6 7 8 9 10
Signal Name ML_Lane 3 (n) GND ML_Lane 3 (p) ML_Lane 2 (n) GND ML_Lane 2 (p) ML_Lane 1 (n) GND ML_Lane 1 (p) ML_Lane 0 (n)
Pin No. 11 12 13 14 15 16 17 18 19 20
Signal Name GND ML_Lane 0 (p) CONFIG1 CONFIG2 AUX_CH(p) GND AUX_CH(n) Hot Plug Detect Return DP_PWR DP_PWR
30
Plug and Play
Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
®
31
Documents / Resources
 |
AOC Q27U3 Cv Monitor [pdf] User Manual Q27U3 Cv Monitor, Q27U3, Cv Monitor, Monitor |
