AOC MS200 Wireless Mouse User Manual

AOC MS200 Wireless Mouse

Product Information

Specifications:

• Model: MS200
• Connection: 2.4GHz Receiver
• Buttons: Left, Right, Scroll
• Battery: Requires batteries (not included)

Product Usage Instructions

Safety Instructions
Before using the product, read the instruction manual carefully for important safety information. Always observe safety instructions to prevent damage due to improper use. Do not use the product if damaged.

How to Connect:
To connect the MS200 mouse, insert the batteries into the battery compartment. Then, plug in the 2.4GHz receiver into your computer’s USB port. The mouse should automatically connect to the receiver.

Battery Replacement:
When replacing the batteries, make sure to insert them correctly by following the polarity markings inside the battery compartment.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please visit our customer support page: www.alza.cz/EN/kontakt.

Function Overview

1. 2.4GHz Receiver
2. Battery compartment
3. Left Button
4. Right Button
5. Scroll Button

How to Connect

• Open the battery compartment cover and insert the battery into the battery compartment.
• Make sure to insert the battery correctly with regard to polarity “+” and “-” marked in the battery compartment.
• Take the wireless USB receiver from the mouse battery compartment and insert it into the computer’s USB port.

  

Troubleshooting

• Make sure that the wireless USB receiver of the product is correctly plugged into the USB port.
• Make sure the computer meets the minimum system requirements.
• If the distance between the product and the receiver exceeds the effective
• range, please reduce the distance for better performance.
  If the above steps do not solve the problem, please try to find the solution from the nearest retailer.

Maintenance

You only need to perform the most basic maintenance to keep the equipment in top condition. It is recommended to remove the device from the USB port every month and wipe the device with a dry cloth or cotton swab. Wipe with a small amount of warm water; do not use soap or harsh detergents.
Note: This equipment is not designed for protection against harmful interference and may cause interference in authorized systems. For more information, see the Anatel website: www.gov.br/anatel.

Safety

Read this instruction manual carefully before using the product. It contains important information for your safety as well as operating and maintenance advice. Observe all safety instructions to avoid damage through improper use! Please follow all warnings on the product. Never use this product if damaged.

• Protect the product from extreme temperatures, hot surfaces, open flames, direct sunlight, high humidity, moisture, strong jolts, flammable gases, vapors, and solvents.
• Always take care to install your batteries correctly, observing the “+” and “-” marks on the battery and the device. Batteriesthath are incorrectly placed into the slots may short-circuit or discharge. This can result in a rapid temperature rise, causing venting, leakage, explosion, and personal injury.
• Always purchase the correct size and grade of battery most suitable for the intended use.
• Clean both the battery contacts anddevice’s contacts beforeforeo battery installation.

Technical Specifications

• Voltage/Current: DC 1.5V/10mA
• Connectivity: 2.4GHz Wireless
• Number of Buttons: 3
• Button Durability: The left and right mouse buttons are rated for up to 3 million clicks
• Resolution: 1200 DPI
• Wireless Range: 10m (33 ft)
• Battery Type: 1xAA battery
• Approximate. Size: 104mm(Length)x61mm(Width)x31mm(Height)
• Approximate Weight: 43g (including USB receiver)

Warranty Conditions

Warranty policies may vary by country or region. For specific details such as the warranty period and coverage, please refer to the after-sales policy provided by the sales channel from which you purchased the product. If you need to request after-sales service, please contact the sales channel or authorized dealer where the product was purchased. Be sure to provide valid proof of purchase, such as an invoice or order number, to confirm yourservice eligibilitye.

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19/EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Frequently Asked Question