Kobra S1 Combo 3D Printer
Specifications:
- Brand: Anycubic
- Model: Kobra S1 Combo
- Printer Type: 3D Printer
- Noise Level: 44dB
- Standard Nozzle Size: 0.4mm
- Printing Layer Thickness Range: 0.05mm to 0.28mm
Product Usage Instructions:
1. Setting Up the Printer
Follow the user manual to assemble the Anycubic Kobra S1 Combo
3D Printer properly.
2. Loading Filament
Insert the filament spool into the designated holder and feed
the filament through the extruder according to the
instructions.
3. Leveling the Print Bed
Use the printer’s leveling feature to adjust the print bed for
optimal printing results.
4. Printing a Model
Prepare your 3D model file, slice it using slicing software, and
send it to the printer for printing.
Frequently Asked Questions (FAQ):
Q: Is the printer noisy during operation?
A: The machine operates at a noise level of approximately
44dB.
Q: What is the printing layer thickness of the Printer?
A: The standard nozzle is 0.4 mm, and it supports a printing
layer thickness range of 0.05mm to 0.28mm.
Anycubic Kobra S1 Combo 3D Printer FAQs
Q: What steps should be taken during the first startup? A: Start with PID tuning, then perform feedback compensation, and finally click on auto-leveling. After that, you can begin your printing path. The entire process takes about 10 minutes. Q: What materials can the Anycubic Kobra S1 Combo print? A: It can perfectly print PLA, PETG, TPU (95A), ABS, and ASA. Additionally, it supports hightemperature materials such as PC, PA, carbon fiber, and glass fiber. *The characteristics of TPU filaments make them only suitable for single-color, and they cannot be used together with ACE Pro for dual printing. Q: Does the Anycubic Kobra S1 Combo have power-loss recovery and filament runout detection? A: Yes, the machine supports both power-loss recovery and filament runout detection functions. Q: How many colors does this machine support for printing? A: With the addition of Anycubic ACE Pro, it supports multi-color printing. By connecting up to two ACE Pro, it can achieve 8-color printing. Q: Will the inside of the machine’s enclosure be too dark? A: The machine comes with built-in LED lights. You can turn on the LED lights to observe the model, and they also provide illumination for the time-lapse photography feature.
Q: Is the printer noisy during operation? A: The machine operates at a noise level of approximately 44dB.
Q: What is the printing speed of Anycubic Kobra S1 Combo? A: The recommended printing speed is 300 mm/s, with a maximum printing speed of up to 600 mm/s and a maximum acceleration of 20,000 mm/s². The time to print a small boat (layer height 0.2 mm) is approximately 13 minutes.
Q: What is the printing layer thickness of the Printer? The standard nozzle is 0.4 mm, and it supports a printing layer thickness range of 0.05mm to 0.28mm.
Documents / Resources
 |
Anycubic Kobra S1 Combo 3D Printer [pdf] User Manual S1 Combo, Kobra S1 Combo 3D Printer, Combo 3D Printer, 3D Printer, Printer |