m0-10 Power Supply Mining PSU For Bitmain Antminer

Product Information

Specifications

• Model Version: S21 Hyd. m0-10
• Crypto algorithm/coins: SHA256|BTC/BCH
• Typical Hashrate: 335 TH/s
• Power on wall @35: 5360 Watt
• Power efficiency on wall@35: 16.0 J/TH

Detailed Characteristics

• Power supply:
  • AC input voltage: 380~415V AC
  • AC Input Frequency Range: 50~60 Hz
  • AC Input current: 12 Amp
• Hardware configuration:
  • Network connection mode: RJ45 Ethernet
    10/100M
  • Server size (Length*Width*Height, w/o
    package): 339*163*207 mm
  • Server size (Length*Width*Height, with
    package): 570*316*430 mm
  • Net weight: 12.3 kg
  • Gross weight: 13.6 kg
• Environment requirements:
  • Fluid type: Deionized water/Pure water
  • Water conductivity: 8.5~9.5 DN10
  • Operating temperature: -20~70°C
  • Operating humidity: 10~90%

Product Usage Instructions

1. Initial Setup
   • Ensure the power supply is connected to the specified AC input voltage range.
   • Connect the network cable using RJ45 Ethernet to establish a connection.
2. Operating Modes
   • NEM: Hashrate at 35 TH/s, Power on wall at 5360 Watt.
   • HEM1: Hashrate at 45 TH/s, Power on wall at 5890 Watt.
   • HEM2: Hashrate at 50 TH/s, Power on wall at 5960 Watt.
3. Maintenance
   • Monitor water conductivity and ensure it remains between 8.5 to 9.5 DN10.
   • Replace the fluid if water conductivity exceeds the specified limit.

Frequently Asked Questions (FAQ)

• Q: What should I do if the product cannot be started?
  A: Check the power supply connection and ensure it is within the specified voltage range. If the issue persists, contact customer support.
• Q: How often should I replace the fluid in the system?
  A: If the water conductivity exceeds 100 s/cm or as indicated in the manual, replace the fluid promptly to maintain optimal performance.

S21 Hyd.
Product Manual

Specification

Product Glance	Value
Model	S21 Hyd.
Version	m0-10
Crypto a lgorithm/coins	SHA256|BTC/BCH
Typical Hashrate, TH/s(1-1)	335
Power on wall @35τ(1-2), Watt(1-1)	5360
Power efficiency on wall@35τ(1-2), J/TH(1-1)	16.0

Detailed Characteristics	Value
Power supply
Power supply AC input voltage, Volt(2-1)	380~415V AC
Powersupply AC Input Frequency Range, Hz	50~60
Power supply AC Input current, Amp(2-2)	12
Hardware configuration
Network connection mode	RJ45 Ethernet 10/100M
Server size (Length*Width*Height, w/o package), mm	339*163*207
Server size (Length*Width*Height, with package), mm	570*316*430
Net weight, kg	12.3
Gross weight, kg	13.6
Environment requirements
Inlet water temperature, °C	NEM(2-3)	35
	HEM1(2-4)	45
	HEM2(2-4)	50
Water flow, L/min	8.0~10.0
Water pressure bar	≤3.5
Working fluid(2-5)	Deionized water/Pure water
Liquid PH	8.5~9.5
Diameter of water pipe connector, mm	DN10
Storage temperature, °C	-20~70
Operation humidity(non-condensing), RH	10~90%

Notes:

1. The Hashrate value, Power on wall, and Power efficiency on wall are all typical values. The actual Hashrate value fluctuates by ±3%, and the actual Power on wall and Power efficiency on wall fluctuate by ±5%.
   1. Inlet water temperature.
   2. Caution: Wrong input voltage may cause server damaged.
   3. Three-phase AC input, 10 A per wire.
   4. NEM: Normal EnergyMode. If the inlet water temperature is lower than 20 °C, the miner cannot be started.
   5. HEM: High EnergyMode.
   6. If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.

Working Mode

Working Mode	NEM	HEM1	HEM2
Inlet water temperature, °C(3-1)	35	45	50
Hashrate, TH/s	335	335	335
Power on wall, Watt	5360	5890	5960
Power efficiency on wall, J/TH	16.0	17.6	17.8

Notes:

1. For the external dry cooler (EC2-DT),
   • if the outlet water temperature is 35°C, the maximum ambient temperature is 30°C;
   • if the outlet water temperature is 45°C, the maximum ambient temperature is 40°C;
   • if the outlet water temperature is 50°C, the maximum ambient temperature is 45°C.

Documents / Resources

ANTMINER m0-10 Power Supply Mining PSU For Bitmain Antminer [pdf] Instruction Manual m0-10 Power Supply Mining PSU For Bitmain Antminer, m0-10, Power Supply Mining PSU For Bitmain Antminer, Mining PSU For Bitmain Antminer, Bitmain Antminer, Antminer

References

• User Manual