E9 Pro Bitmain Antminer Miner Value
Specification
| Product Glance | Value |
| Model | E9 Pro |
| Version | 260-E |
| Cryptoalgorithm | Coins | Etchash/Ethash | ETC/ETHW/ETHF |
| Typical Hashrate, MH/s(1-1) | 3680 |
| Power on wall @25τ, Watt(1-1) | 2200 |
| Power efficiency on wall@25τ, J/MH (1-1) | 0.6 |
| Memory, GB | 7 |
| Detailed Characteristics | Value |
| Power supply | |
| Power supply AC input voltagerange, V(2-1) | 200-240VAC |
| Powersupply AC Input Frequency Range, Hz | 50-60 |
| Power supply AC Inputcurrent, A(2-2) | 20 |
| Adapted AC outputpower requirement, W(2-3) | 4000 |
| Hardware configuration | |
| Quantityof hash chips | 16 |
| Quantityofhashboards | 2 |
| Networkconnectionmode | RJ45 Ethernet 10/100M |
| Server size (Length*Width*Height, w/o package), mm | 550*195.5*310 |
| Server size (Length*Width*Height, withpackage), mm | 722*322*427 |
| Net weight, kg | 20.2 |
| Grossweight, kg | 22.0 |
| Noise, dBA @2 (2-4) | 70 |
| Environment requirements | |
| Operationtemperature, °C | 0~40 |
| Storage temperature, °C | –20~70 |
| Operationhumidity(non-condensing), RH | 10~90% |
| Operationaltitude, m(2-5) | ≤2000 |
Notes:
- The Hashrate value, Power on wall, and Power efficiency on wall are all typical values. The actual Hashrate value fluctuates by 3%, and the actual Power on wall and Power efficiency on wall fluctuate by 5%.
- Caution: Wrong input voltage may cause server damaged.
- Two AC input, 10 A per wire.
- Caution: It is strongly recommended that the power on wall of the miner does not exceed this value.
- Max condition: Fan is under max RPM(rotation per minute).
- When the miner is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
Performance Curves
Hashrate Vs. Ambient Temperature
J/M Vs. Ambient Temperature E9
Documents / Resources
 |
ANTMINER E9 Pro Bitmain Antminer Miner Value [pdf] Instruction Manual E9 Pro Bitmain Antminer Miner Value, E9 Pro, Bitmain Antminer Miner Value, Antminer Miner Value, Miner Value, Value |