GU01 Ansque Wireless Security Camera Kit Instructions

Ansque LogoQUICK START GUIDE
Wireless Security Camera Kit
GU01

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Customer Service

Warranty
12-Month Warranty & 365-Day Return Policy
Email Us
Customer Support: service@ansque.net
Online Support:
24/7 App’s Builtin Tech Support
Call Us.
United States
+1(888) 681 4666
Mon-Sun 7AM – 5PM (PST) / Mon-Sun 8AM – 6PM (PDT)
GU01 Ansque Wireless Security Camera Kit - icon Facebook @ANSQUE security
GU01 Ansque Wireless Security Camera Kit - icon 1 Twitter. @ANSQUE_security
GU01 Ansque Wireless Security Camera Kit - icon 2 YouTube: @ANSQUE_security
GU01 Ansque Wireless Security Camera Kit - icon 3 Instagram: @ansqueofficial
Important Notes
Charging Instructions Before First Use:
Before you start using your camera, please ensure it i fully charged. We recommend the following

  1. Use the 5V/2A charger (charger not included) and included USB cable. Charging from 0% 10100% takes approximately 8 hours.
  2. During charging, a green indicator light next to the port Willi luminate.

Camera Mounting Location Recommendations:
To achieve the best performance, choose a mounting location for your camera based on the following recommendations:

  1. Install the camera 7 to 10 feet (2 to 3 meters) above ground for optimal monitoring range and reduced accessibility.
  2. Install the solar panel in a location that receives 2 hours of direct sunlight daily and is free from obstructions.
  3. Place the AnsqueBase near the camera to maintain a stable Wi-Fi connection. Before installing, use the app’s Wi-Fi signal strength checker to ensure the installation point has strong Wi-Fi coverage

What’s in the Box

GU01 Ansque Wireless Security Camera Kit - Box

Product Overview

Camera

GU01 Ansque Wireless Security Camera Kit - Product

AnsqueBase
GU01 Ansque Wireless Security Camera Kit - Product 1

Connecting the AnsqueBase

  1. Power on AnsqueBase, then use the ethernet cable provided to connect the AnsqueBase 10 your home routerGU01 Ansque Wireless Security Camera Kit - Product 2
  2. The LED indicator turs blue (this may take up to 1min) when AnsqueBase is ready for setupGU01 Ansque Wireless Security Camera Kit - Product 3

Setting up Your Camera

Download ‘Koocam’ APP
Download the Koocam App from the App Store (i0S) or Google Play (Android)

GU01 Ansque Wireless Security Camera Kit - Qr Codehttp://n-link.top/79928310480

Tips: Please tum on 2 below permissions while using this APP for the first time.
* Allow ‘Koocam’ AP to access mobile cellular data and wireless LAN or it will fail to add IP camera.
* Allow ‘Koocam’ APP 1o receive pushed message or the phone will not receive alarm push when motion detection or audible alarm is triggered
Add a Camera to APP.
Sign up for an Koocam App account, then follow the onscreen instructions to complete the setup
Tips: During the inital setup, make sure your phone and the AnsqueBase are connected to the same home Wi-Fi network so the device can be detected and paired properly.
Scan the QR code for more information

GU01 Ansque Wireless Security Camera Kit - Qr Code 1Scan to watch the camera connection video tutorial
http://n-link.top/url/79928312052

GU01 Ansque Wireless Security Camera Kit - Qr Code 2Scan to view more common FAQs
http://n-link.top/url/79928312142

GU01 Ansque Wireless Security Camera Kit - Product 4

Charge Your Camera

GU01 Ansque Wireless Security Camera Kit - ChargeCharge the battery with a power adapter (power adaptor is not included).GU01 Ansque Wireless Security Camera Kit - Charge 1

For better weatherproof performance, please always cover the USB charging port with the rubber plug after charging the battery.

Mounting Your Camera

Find a Good Mounting Spot
To find a spot to mount camera, you need to test wireless signal strength

  1. 0pen the Koocam App, go to Camera Settings > Install Guide
  2. To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera
  3. Move the camera as close to the Wi-Fi Router as possible to get a better signal.

GU01 Ansque Wireless Security Camera Kit - Charge 2

Select a Height
The camera can be mounted on a wall. Select a location where you can get the desired view. We recommend hanging it 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of camera.
To maximize energy absorption efficiency, choose a location where the solar panel can receive more sunlight.

GU01 Ansque Wireless Security Camera Kit - Location

Select a Loc:

  1. When installing in the northern hemisphere, face the solar panel to the south, and when installing in the souther hemisphere, face the solar panel o the north
  2. Please note that when installing the solar panel, try to avoid having sunlight blocked by eaves, branches, or other objects.

GU01 Ansque Wireless Security Camera Kit - Location 1

Select Installation Method
This product supports two solar panel mounting methods to accommodate different usage scenarios and lighting conditions.

  1. Separate installation: Solar panels can be installed independently in locations with the most sunlight to ensure efficient absorption of solar energy.
  2. Combination Installation: Solar panels can be directly integrated with cameras for easier installation, making them iceal for locations with ample sunlight

GU01 Ansque Wireless Security Camera Kit - Location 2

Product Installation

  1. Place the hole stickers where you plan to install the camera.
  2. 0l four holes according to the hole positions on the sticker.
  3. Insert the plastic anchors into the holes.
  4. Align the bracket with th ¢ hole and screw the screws into the plastic anchors to secure the bracket
  5. Snap the camera into the bracket firmly. (Make sure you hear a click sound before letting go).

GU01 Ansque Wireless Security Camera Kit - Location 3

FCC Statement

This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference a residential installation
This equipment generates, uses and can radiate radio frequency energy and, f not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular instalation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help.
Responsible for compliance could void the user’s authority to operate this equipment (Example-use only shielded interface cables when connecting to computer or peripheral devices)
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment “This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and; 2.This device must accept any interference received, including interference that may cause undesired operation
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Join the Facebook Ansque Camera Official Community

GU01 Ansque Wireless Security Camera Kit - Qr Code 3http://n-link.top/url/79928312142

Connect with real Ansque Camera users worldwide.
Get official setup guides, troubleshooting help, and exclusive community offers-all in one place.

GU01 Ansque Wireless Security Camera Kit - icon 4

HUMISS TRADING S.L
Calle Luis Bañuel 12-3A, Madrid, 28018,
Spain
eugpsres@outlook.com
+34613177772
Sea&Mew Accounting Ltd
Electric Avenue Vision 25, London,
Enfield EN3 7GD
info@seamew.net
+447399648608

Official Email: service@ansque.net
Official Website: https://ansque.net/

Documents / Resources

PDF thumbnailGU01 Ansque Wireless Security Camera Kit
Instructions · ANSQUE, GU01, security camera, camera kit

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.