SAFETY INSTRUCTIONS

• The product is only intended for indoor use.
• Check that the mains voltage corresponds to the rated voltage on the type plate.

WARNING! 

• Do not allow children to use the product.
• Do not dismantle the product or attempt to repair it. The product does not contain any parts that can be repaired by the user. Repairs must be carried out by an authorised service centre.
• The product must only be used for its intended purpose and in accordance with these instructions.
• Do not use the product if it is damaged, or not working properly. Discard the product if it is damaged and replace with a new one.
• Do not expose the product to rain or moisture.
• Do not subject the product to knocks and blows.

SYMBOLS

	Read the instructions.
	The product is dimmable.
	Not suitable for use in damp rooms.
	Approved in accordance with the relevant directives.
	Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

• Rated voltage 230 V~50 Hz
• Power 3.5 W
• Frequency 2.4 GHz
• Socket E27
• Colour rendering index CRI 80
• Colour temperature 1800 K + RGB
• Colour tone Extra warm white

DESCRIPTION

This is a SMART product that can be connected to existing WiFi and controlled via the app Smart Life, or with a voice assistant. Does not require a separate hub/router. You can control all SMART products in the app and use functions such as timer control, scheduling and automatised events.

SYSTEM REQUIREMENTS

Check that the smartphone is connected to the 2.4 GHz WiFi network and switch on the light. WiFi router. iPhone, iPad (IOS 11.0 or higher) or Android (5.0 or higher). Compatible with Google Assistant, Amazon Alexa etc.

USE

INSTALL APP 

1. Scan the QR code to download the Smart Life app. Or search at App Store or Google Play.
2. Start the app to register or log-in to your account.

Registration

Register with mobile phone number or email address. *Country settings follow the mobile telephone system, but it is possible to change country number/settings manually before registering is completed (cannot be changed after registering).

Login

If you already have an account, click on ”Log in with an existing account” under ”Create a new account”, enter the mobile phone number or email address used to register and enter the password to log in, after which the operative system iOS can use Apple ID to log in.

CONNECT PRODUCT

1. Press the “Add device” and select light source (Wi-Fi) to make adjustments for new device.
2.  Screw the light source in a lamp. The light source flashes rapidly. If the light source does not flash rapidly, switch on and switch off the light source five times and then switch on again, after which the light source flashes rapidly.
3. Press “Confirm” in the app to confirm.
4. Connect to the WiFi network and enter the password.
5. Press “Next” in the app to continue.
6. Connection starts. The text on the bottom of the screen gradually goes green. The connection is completed when all 3 points are green.
7. The light source can now be remote controlled wherever you are.

NOTE: 

Do not disconnect the power supply to the light source when it is switched on and connected to WiFi – only use the app to switch on and off the light source.

This declaration of conformity is issued under the sole responsibility of the manufacturer.

LIGHT SOURCE EN

SMART, WIFI
Conforms to the following directives, regulations and standards

This product was CE marked in year:

Skara 2022-08-30
DoC: EN-SE-NO-PL-DE-FI-FR-NL