ANEX IQ Basic Stroller
IQ ALL-IN-ONE
Folding of the frame
IQ FRAME
Unfolding of the frame
Attaching of the front wheels
Locking front swivel wheels
Attaching of the rear wheels
Brakes
Shock absorption
Handle regulation
Disconnecting/connecting of the shopping basket
Carry handle
Frame width adjustment
Unpacking of the carrycot
Folding of the carrycot
Unfolding of the carrycot
Attachment to the frame
Ventilation
Carrycot’s hood adjustment
Carrycot’s cover attachment
Carrycot’s cleaning
Attachment to the frame
IQ SEAT UNIT
Folding of the frame with seat
Seat unit’s hood adjustment
Seat unit’s backrest adjustment
Ventilation of the seat unit’s backrest
Footrest adjustment
Seat unit’s security barrier
Safety belts buckle
Safety belts adjustment
Seat unit’s cleaning
Softgoods assembling
Buggy’s hood adjustment
Ventilation of the buggy’s backrest
Buggy’s backrest adjustment 
Footrest adjustment
Safety belts buckle
Safety belts adjustment
Folding of the frame with buggy
Raincover for carrycot/ seat unit
Check for the most recent manuals on our website: anexbaby.com
The information Is subject to change without notice. Anex shall not be liable for technical errors or omissions contained In this manual. The purchased product may differ from the product as described in this manual.
AVALEX PTE. LTD.,
8 Eu Tong Sen Street #17-88, Central
Office tower 2, Singapore, 059818
+65 62215096
office@anexbaby.com
Documents / Resources
 | IQ Basic Stroller |
References
- User Manualmanual.tools
Dear Anex Team,
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Kind regards,
Yuliya Tolkishevskaya
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Kind regards,
Yuliya Tolkishevskaya
How do I remove the height adapters from the Anex IQ seat unit if they are stuck?
Removing height adapters from the Anex IQ seat unit typically requires engaging the release mechanism located on the adapters themselves or the seat unit's attachment points. If they are stuck, please try the following steps:
Caution: Do not use excessive force or tools like pliers, as this may damage the plastic locking tabs. If the adapters remain stuck, it is recommended to contact Anex customer support directly at office@anexbaby.com or visit an authorized service center, as there may be a mechanical obstruction or a need for professional lubrication of the locking pins.
Read the full Q&A page