Android Car Navigation User Manual
Android Car Navigation User Manual
Car Audio and Video System
Precautions for use
To ensure the safety of you and your car and others, be sure to do the following basic requirements:
- Please read all relevant instructions carefully before using the unit. If the unit is damaged due to improper operation, the warranty will not be available.
- This device is a 12V machine and can only be used on a 12V power supply.
- To ensure safe driving and avoid illegal traffic regulations, do not watch programs or operate the unit while driving.
- To prevent short circuits. Please do not place or leave any metal objects inside the device.
- To avoid short circuits. Do not allow the unit to come into contact with rain.
- Please use this manual according to this manual. Do not open the unit for maintenance. If there is any repair, please go to the professional repair station for repair.
- When the engine is off, do not use the car audio for a long time, otherwise, it will run out of battery power.
- Do not touch or tap the screen with a sharp object.
- Thank you very much for using our Android car navigation system.
Quick operation
- Quick operation after the screen is down,(switch) (notification)
- Click wifi and click the notification again to set the wifi password connection.
- Touch the switch on the screen.
- Original car power amplifier settings.
- Clear the key to memory. (D.Screenshots.
- Bluetooth connection.
- Android settings.
- Set on the machine.
- Video output.
Touch the button to learn
After the five fingers of the palm press the screen for a few seconds, the calibration pops up. Click 1.2.3.4 to set the button to confirm the learning. The first step is to start learning the yellow color, click the power letter to change the yellow color, and click the light board switch machine’s coordinates again. The yellow color of the power letter will disappear, and so on Finally, click the close position to confirm and the setting is successful.
Local music
Click on the main interface “Local Music” to enter the local music interface. This operation is effective when the machine has an SD card or USB interface and the corresponding media file.
- Click on the main interface “Local Radio” to enter the local radio interface
- Click the home interface, then click the other function icon to exit
- Click to clear all stored radio records and perform an automatic search.
- Search the radio up/down. Each radio found will pause the search.
- Where the collection is stored
- Qs Click on the last radio station / next radio station ®. Click here to delete the collection broadcast
- Q. Browse the collection radio
- Switch between FM/AM bands
- Go back to the previous interface
- Automatic search lock sensitivity can be selected between strong/medium.
Video playback
Click the main interface “Video Play” to enter the video interface (support RMVB / RM / FLV / 3GP / 1080 p HD video) and other video formats.
This operation is effective when the machine has an SD card or USB interface and the corresponding media file. Click the “All” icon to switch between all / SD / U disk/file browsing. When the video file is read, the system automatically plays the file
Shown. online news
Click the main interface “Network News” to enter the network news interface (need to connect to the network), you can receive the latest news of the day at any time. Automatic voice playback
Click the icon to explain
- After entering the homepage interface, click the other function icon to exit.
- browsing the news
- Go back to the previous interface
- Automatic voice pause/playback
- Click on the news list directly to enter detailed news
Browser
Click on the main interface “Browser” to enter the browser interface
- Click on the system status bar above to return to the main interface or return to the upper level
- Click on the “Search or Acquaintance URL,” at the top, pop up the keyboard to enter the URL, click “GO” to enter the page
- Pages collected in the middle of the page can be edited and deleted, and grow to the bank in the middle of the page. You can add urls.
- Return to the upper/lower layer, display the number of currently open pages, click to zoom out to enter the bookmark page in the upper right corner of “+” System settings
System Information
Click ‘Default Settings” to restore the factory settings; click “Screen” to screen calibration interface Android upgrade and MCU upgrade. Android upgrade to the highest version of android; MW upgrade to the highest version of MCU software External audio-video connects related devices to play audio and video files.
Steering wheel learning
The steering wheel learning steps are as follows:
- Press any button on the steering wheel, the interface will display a long press on the steering wheel, and you will not be able to learn without pressing the steering wheel button for a while.
- Click on the screen to learn the docking function
- Click the corresponding function button on the steering wheel and repeat 1/3 steps in sequence until all the control buttons on the steering wheel are completed.
- The implementation conditions of this function:
- Original steering wheel for non-bus control
- The steering wheel key of the original car must be the voltage input control method
Brightness setting
Click the “+” – “” icon to adjust the value
Volume setting
Click the “+” – “icon to adjust the multimedia volume and Bluetooth volume separately.
- Sound settings
- Click the slider to adjust the bass, bass, baritone, treble
- Click on the corresponding icon to set it on rock/custom/classic/ jazz/prop
- Click on the top, bottom, left, right, or click on the center point to adjust the position of the speaker.
- Click the “Default” icon to restore the sound settings parameters to the system defaults
Bluetooth
Click “Bluetooth” on the main interface to enter the Bluetooth connection.
Non-Bluetooth connection: input Bluetooth interface, do not display Bluetooth connection, will prompt you to ” Please do Bluetooth connection” Bluetooth device name and password connection, after a successful connection, you can use Bluetooth mobile phone and Bluetooth music
Mirror link
Mirrored connection is a new type of software. It can be interconnected with the mobile phone at the same time. Scan the QR code to download the software on the mobile phone and use it according to the picture prompts.
First, the Android phone enters the settings, find the “developer options”, different phones, their location is not the same, some mobile phones
It is hidden, you need to enter “About Mobile Phone” and click “Version Number” for more than 5 times, it will appear “You are already at
In developer mode, you don’t need to do this”
Step 2: After entering the “Developer Options”, open the “Developer Options” switch and the “USB Debug” switch
The third step: open the mirror connection APP, the mobile phone scans the QR code to download the APP.
Step 4: The mobile phone data cable can be connected to the machine USB for normal use.
The Apple mobile phone opens a hotspot and the machine connects to the mobile phone hotspot signal.
Logo setting
Click on the car settings, select the car logo settings, the built-in LOGO selects the model that matches your own and starts to set the LOGO confirmation.
Factory setting
Password “8888” parameter setting
The car navigation protocol box is a square box connected to the navigation tail line used for data output to realize the information communication between the driving computer and the navigation. More is used in the high car, decoding the original car’s air conditioning display, steer ng wheel control, door opening information, and other functions.
- Ground wire (Black)
- +12v Battery (Yellow)
- +12VAcc Switch (Red)
- Little lamp test (orange-red)
- Parking sensor control wires (brown)
- Steering wheel key control wires(Green and white)
- Steering wheel key control wires (pink)
- Radio antenna power supply (blue)
- Front Right – Speaker (gray/black)
- Rear left – speaker (green/black)
- Front Right + Speaker (gray)
- Rear left + Speaker (green)
- Front left – speaker (white/black)
- Rear right + Speaker (Violet)
- Front left + Speaker (white)
- 16.Rear right – Speaker (Violet/black)
Thank you for your patronage.
The company reserves the right of the final interpretation of this manual Thank you very much for using our onboard navigation products? In order to use. the system correctly, please read this manual and keep it properly before use.
FAQS
Yes.
if your car has a double DIN opening, then A6G2A7PF, as a universal double DIN Android car stereo, will fit your car 2009 Volkswagen Jetta.
You may need a suitable dash kit and wiring harness (or in some cases, a CANBUS data interface) to complete the installation. First check with online or local suppliers for availability of the installation kit specific to your vehicle.
We recommend you to purchase our one-stop solution S8VW114SD (B09VKSDTKB). It is from our S8 flagship series, has a much larger screen, and will keep the OEM-style look of your vehicle.
If you have any further questions or need futher assistance, please email us at {support@myatoto.com}. Our support team will be happy to provide you with more detailed answers and information.
Any double din
Internal no. External yes.
You don’t actually use Bluetooth to connect wireless Apple CarPlay. Click on the “Car Link 2.0” icon… it’s red and looks like a phone and a screen connected by a cable. That’s the app the unit uses for wireless Apple CarPlay.
As long as the connection match and the signaling is the same.
if your car has a double DIN opening, then A6G2A7PF, as a universal double DIN Android car stereo, will fit your car 2010 Ford E series.
You may need a suitable dash kit and wiring harness (or in some cases, a CANBUS data interface) to complete the installation. First check with online or local suppliers for availability of the installation kit specific to your vehicle.
If you have any further questions or need futher assistance, please email us at {support@myatoto.com}. Our support team will be happy to provide you with more detailed answers and information.
When is your link your phone with CarPlay on the stereo it will do automatically every time you turn on the car with out connecting using wires ,if that is your question
the part of A6G2A7PF that goes into the dash measures 178 mm (width) x 100 mm (height). It is the ISO standard double DIN size. The depth is 102 mm.
If you have any further questions or need futher assistance, please email us at {support@myatoto.com}. Our support team will be happy to provide you with more detailed answers and information.
if your car has a double DIN opening, then A6G2A7PF, as a universal double DIN Android car stereo, will fit your car 2010 gmc sierra 2500hd.
You may need a suitable dash kit and wiring harness (or in some cases, a CANBUS data interface) to complete the installation. First check with online or local suppliers for availability of the installation kit specific to your vehicle.
If you have any further questions or need futher assistance, please email us at {support@myatoto.com}. Our support team will be happy to provide you with more detailed answers and information.
It fit great in my 2009 Toyota Tacoma
Check your speakers my wires were broke because the door
Yes, it has a built-in GPS.
Yes, it supports Bluetooth.
Yes, it supports RDS.
Yes, it supports USB.
Yes, use the usb cable that is the one NOT labeled for phones or other Android devices. The cable is labeled DATA or something close to that.
VIDEO
Documents / Resources
 | Android Car Navigation |
References
- User Manualmanual.tools
My Android radio for BMW 318I e46 touch control switch not working and steering not working is there any set-up should I do after I deed steering instruction already need help
Is there a way to have the radio go silent when the GPS is announcing directions ?
Radio android k2001n does not give sound… I already checked the cables and harnesses, all are connected correctly…
Radio android k2001n no da sonido… Ya revise los cables y los arnés todos están conectados correctamente…
Radio android k2001n no da sonido... Ya revise los cables y los arnés todos están conectados correctamente...
Why is there no sound on my Android K2001N car navigation unit even though the cables are connected correctly?
If your Android K2001N unit has no sound despite correct wiring, please check the following software and system settings based on the manual:
8888). Check if the "Car navigation protocol box" (CANBUS) settings match your vehicle, as this box often decodes audio signals for high-end car systems.Read the full Q&A page
I have an android radio k2001n does not give sound… The cables and harness are correctly connected… Solution please
Tengo un radio android k2001n no da sonido.. Los cables y arnés están correctamente conectados… Solución x favor
Tengo un radio android k2001n no da sonido.. Los cables y arnés están correctamente conectados... Solución x favor
How do I fix a lack of sound on my K2001N Android car radio when cables are correctly connected?
If your K2001N Android radio has no sound despite correct wiring, please check the following settings and hardware configurations based on the manual:
8888). Check if the correct CANBUS protocol is selected for your vehicle model, as this often controls audio signal routing.Read the full Q&A page
When the screen is turned on it turns on in night mode, as it would return to day mode
Cuando se enciende la pantalla se enciende en modo nocturno, como volvería a modo de día
Cuando se enciende la pantalla se enciende en modo nocturno, como volvería a modo de día
How do I change the screen from night mode back to day mode?
To adjust the screen brightness and switch between day and night modes on your Android Car Navigation system, follow these steps:
If the screen is unresponsive or the colors are distorted, you may need to perform a screen calibration by pressing the screen with five fingers for a few seconds until the calibration interface appears, then following the numbered prompts (1, 2, 3, 4).
Read the full Q&A page
How can I turn off the color change on the Android system car player itself
Hoe kan ik de kleurenverandering uitzetten op het Android system car player zelf
Hoe kan ik de kleurenverandering uitzetten op het Android system car player zelf
How can I turn off the color change on the Android car navigation system?
To stop the color change on your Android car navigation system, you need to access the Touch button learn settings. Follow these steps based on the manual:
Note: Because many generic Android head units have slightly different software interfaces, if you do not see these options, look for Factory Settings (often requires password
8888) and check for "Key Light" or "Illumination" settings to lock the color.Read the full Q&A page
I bought a CHICK PX6 12.8 inch radio also known as KLYDE KD 12.8 inch screen.
The packaging only came with a limited manual, where only the functions are mentioned, what it can do, but it does not tell you how to do the settings.
For example, I do not read how to save the pre-select channels and I do not read what prog. I need to use on my phone to control the radio remotely, how to split the screen etc.
Does anyone know where I can download a detailed manual for this radio?
Ik heb een CHICK PX6 12,8 inch radio gekocht ook bekend als KLYDE KD-12,8 inch scherm.
Bij de verpakking zat alleen maar een beperkte handleiding, waar alleen maar de functies benoemd worden wat hij allemaal kan, maar er wordt niet verteld hoe je de instellingen moet doen.
Zo lees ik niet hoe ik de pre-select kanalen kan opslaan en lees ik niet wat voor prog. ik op mijn telefoon moet gebruiken om de radio op afstand te kunnen bedienen, hoe ik het scherm kan splitsen enz.
Is er misschien iemand die weet waar ik een uitgebreide handleiding van deze radio kan downloaden.
The packaging only came with a limited manual, where only the functions are mentioned, what it can do, but it does not tell you how to do the settings.
For example, I do not read how to save the pre-select channels and I do not read what prog. I need to use on my phone to control the radio remotely, how to split the screen etc.
Does anyone know where I can download a detailed manual for this radio?<e/em>
Ik heb een CHICK PX6 12,8 inch radio gekocht ook bekend als KLYDE KD-12,8 inch scherm.
Bij de verpakking zat alleen maar een beperkte handleiding, waar alleen maar de functies benoemd worden wat hij allemaal kan, maar er wordt niet verteld hoe je de instellingen moet doen.
Zo lees ik niet hoe ik de pre-select kanalen kan opslaan en lees ik niet wat voor prog. ik op mijn telefoon moet gebruiken om de radio op afstand te kunnen bedienen, hoe ik het scherm kan splitsen enz.
Is er misschien iemand die weet waar ik een uitgebreide handleiding van deze radio kan downloaden.
How do I save radio channels, use remote control apps, and split the screen on a CHICK PX6 / KLYDE KD 12.8 inch Android car navigation system?
While the specific manual for the 12.8-inch CHICK PX6 / KLYDE KD is not directly attached, most Android-based car navigation systems share a common interface. Based on the general Android Car Navigation manual, here are the steps for your requested settings:
If these steps do not match your interface, you can try searching the Manuals+ Deep Search for "KLYDE KD" or "PX6 Android Radio" to find a more detailed PDF version.
Read the full Q&A page
Manuel is found that I want to setup my anroid car tape.
How do I set up my Android car navigation system?
To set up your Android car navigation system, follow these primary steps based on the user manual:
8888.Note: Always ensure the engine is running when using the system for extended periods to avoid draining your car battery.
Read the full Q&A page
good afternoon I have an android 10 radio for an opel insignia year 201 van, but 3 days ago it stopped memorizing my radio stations and also my screen background images.. does anyone know how I can solve the problem? every time i start the van i have to memorize everything again and every time i turn it off nothing is memorized.
boa tarde tenho um radio android 10 para uma carrinha opel insignia ano 201, mas ha 3 dias deixou de memorizar as minhas estaçoes de radio e tambem as minhas imagens de fundo da tela.. alguem sabe como posso resolver o problema? sempre que ligo a carrinha tenho que memorizar tudo de novo e sempre que a desligo nada fica memorizado.
boa tarde tenho um radio android 10 para uma carrinha opel insignia ano 201, mas ha 3 dias deixou de memorizar as minhas estaçoes de radio e tambem as minhas imagens de fundo da tela.. alguem sabe como posso resolver o problema? sempre que ligo a carrinha tenho que memorizar tudo de novo e sempre que a desligo nada fica memorizado.
Why is my Android car radio not saving radio stations and background images after the car is turned off?
The issue of your Android car navigation system not memorizing radio stations or background images is typically related to the wiring of the constant power supply. For the unit to retain memory, it requires a continuous 12V power source even when the ignition is off.
Please check the following based on the wiring diagram provided in the manual:
If the wiring is correct, you can also try a factory reset by going to System Settings > System Information > Default Settings to rule out a software glitch, though this is less likely to be the cause than the physical power connection.
Read the full Q&A page
why can’t I download w/o a ton of B>S>
How can I download the manual without encountering excessive advertisements or obstacles?
Manuals.plus provides the full content of the Android Car Navigation User Manual directly on the webpage for free viewing without requiring a download. You can read all instructions, including wiring diagrams and setup steps, by scrolling through the post.
If you specifically need a PDF copy for offline use, please note the following:
support@myatoto.com.Read the full Q&A page
This thing is a POS. Radio sometimes works and then it doesn’t. Can’t figure out how to make the equalizer work. My truch stock mic’s for the phone system are muffled. No installation instruction. User manual is very vague. Wished I never purchased.
How do I use the equalizer, fix muffled microphone audio, and find installation instructions for my Android car navigation system?
Based on the manual for the Android Car Navigation system, here are the steps to address your concerns:
If your specific model is an ATOTO A6 Performance (as suggested by some context), you can reach out to their support team at
support@myatoto.comfor vehicle-specific dash kits and wiring harnesses.Read the full Q&A page
Thank you very much for the instruction. I couldn’t cope with the mirror image, I was looking on various forums and here please:
five fingers are enough to enter screen calibration.
Thank you again. Regards
Bardzo dziękuję za instrukcję. Nie mogłem sobie poradzić z lustrzanym odbiciem, szukałem na różnych forach a tutaj proszę:
wystarczy pięć palców i wchodzisz w kalibrację ekranu.
Jeszcze raz dziękuję. Pozdrawiam
five fingers are enough to enter screen calibration.
Thank you again. Regards<e/em>
Bardzo dziękuję za instrukcję. Nie mogłem sobie poradzić z lustrzanym odbiciem, szukałem na różnych forach a tutaj proszę:
wystarczy pięć palców i wchodzisz w kalibrację ekranu.
Jeszcze raz dziękuję. Pozdrawiam
How do I calibrate the screen on an Android car navigation system to fix a mirror image issue?
To fix a mirror image or calibrate the screen on your Android car navigation unit, you can use the following gesture:
If you need to access these settings through the menu, navigate to System Settings > Screen to find the calibration interface. For units with a "Mirror Link" feature, ensure your phone's developer options and USB debugging are correctly configured if the mirroring issue persists during mobile interconnection.
Read the full Q&A page
il mio con il tasto di spegnimento si disattiva l’audio, come si può cambiare?
How can I change the power button function so it doesn't just mute the audio?
To change or reassign the behavior of your device's buttons, you can use the Touch button learn feature found in the system settings. Follow these steps to recalibrate or change button functions:
If your unit uses steering wheel controls for power/mute, you can similarly adjust these under Steering wheel learning in the settings menu by pressing the steering wheel button and then selecting the desired function on the screen.
Read the full Q&A page
MY RADIO DOES NOT LOAD KNOWN RADIO PRINTERS
O MEU RADIO NAO CARREGA IMISSORAS DE RADIO CONHECIDAS
O MEU RADIO NAO CARREGA IMISSORAS DE RADIO CONHECIDAS
Why is my radio not loading or finding known radio stations?
If your Android Car Navigation system is not loading or finding known radio stations, you can try the following steps based on the manual:
If the issue persists after an automatic search, verify that the antenna is not damaged and that the ground wire (Black) is securely connected to prevent interference.
Read the full Q&A page
My car toyota logo cannot be set
How do I set the Toyota car logo on my Android Car Navigation system?
To set the Toyota logo on your Android Car Navigation system, follow these steps based on the user manual:
If these options are protected by a password, the manual indicates the default factory setting password is
8888.Read the full Q&A page
My vehicle is a 2012 Ford F-150. The soft buttons on the front of the radio not working. During the learning it wouldn’t change from yellow to blue, stay on the screen, to save changes. Can’t add new settings to the stirring wheel buttons. Please help.
How do I fix soft buttons not working and steering wheel button learning issues on my Android car navigation system?
Based on the manual for the Android Car Navigation system, here are the steps to resolve issues with button learning and steering wheel controls:
1. Screen Calibration (Soft Buttons)
If the soft buttons on the front of the radio are unresponsive or not saving changes, you may need to recalibrate the touch coordinates:
2. Steering Wheel Learning
For your 2012 Ford F-150, ensure the following conditions are met for steering wheel learning to work:
If the buttons still do not change from yellow to blue (indicating a successful save), double-check that the 'Key 1' or 'Key 2' wires (usually Pink and Green/White) are correctly connected to your vehicle's steering wheel control wiring harness.
Read the full Q&A page
hi I have this android car radio it has a black rear subwoofer output, I have connected to the amp but can’t get sub to work. everything else works sub works tested else were. just wanted to see if there is any sub settings or something else
How do I troubleshoot the subwoofer output on my Android car radio?
To troubleshoot your subwoofer output on an Android car navigation unit, please check the following settings and connections:
8888) to see if there is a toggle to enable the Subwoofer RCA output.If these steps do not resolve the issue, ensure the black RCA output is firmly seated and that the audio source being played actually contains a dedicated LFE (Low-Frequency Effects) channel.
Read the full Q&A page
Hello, I would like to know how to adjust the volume when you turn on the car radio brand CAR NAVIGATION ENTERTAINMENT SYSTEM THANK YOU
Buongiorno desidero sapere come regolare il volume quando accendi l’auto radio marca CAR NAVIGATION ENTERTAINMENT SYSTEM GRAZIE
Buongiorno desidero sapere come regolare il volume quando accendi l’auto radio marca CAR NAVIGATION ENTERTAINMENT SYSTEM GRAZIE
How do I adjust the volume on my Android car navigation system?
To adjust the volume on your Android car navigation system, follow these steps based on the manual:
If your device has physical buttons or a touch-sensitive panel on the side, you may also find dedicated volume keys there. If you are specifically looking to set a default startup volume, this is often found under Factory Settings (Password: 8888) or System Settings, though use caution when modifying factory parameters.
Read the full Q&A page
*please sumone help me before I rip this thing out of my dash an smash it on the sidewalk sumhow my kid managed to get into screen calibration mode an really messed it up an now the screen is useless cuz it’s hard to find out where u hav to touch it to make do anything so please help
How do I calibrate the screen on my Android car navigation system?
To fix a misaligned or non-responsive touch screen on your Android car navigation system, you can enter the screen calibration mode using a specific touch gesture. Follow these steps:
If you are unable to trigger this mode because the screen is too far out of alignment, you can also try navigating to System Settings > Screen to find the calibration interface manually, or use the Default Settings option to restore factory defaults.
Read the full Q&A page
Good morning,
the radio station is not displayed on the dashboard of my AUDI A4 1.9 TDI 2006 car. Is this normal or is there something missing in the connection?
Bonjour,
la station radio ne s’affiche pas sur le tableau de bord de ma voiture AUDI A4 1.9 TDI 2006. C’est normal ou il manque quelque chose dans le branchement ?
the radio station is not displayed on the dashboard of my AUDI A4 1.9 TDI 2006 car. Is this normal or is there something missing in the connection?
Bonjour,
la station radio ne s'affiche pas sur le tableau de bord de ma voiture AUDI A4 1.9 TDI 2006. C'est normal ou il manque quelque chose dans le branchement ?
Why is the radio station not displayed on my Audi A4 2006 dashboard after installing an Android navigation system?
The issue you are experiencing with the radio station not displaying on your Audi A4 dashboard (the Driver Information System or DIS) is common when replacing an original factory head unit with an aftermarket Android system. Here are the primary reasons and potential solutions:
8888).8888) > Protocol Settings. Ensure you have selected the correct manufacturer (e.g., Raise, Simple Soft) and the specific Audi A4 model to enable data communication.If the CANBUS box is missing or the software protocol does not support DIS integration, the dashboard display will unfortunately not show the radio station information.
Read the full Q&A page
Do you know why to makes an alert (bing noise) when I lift my foot off the brake pedal and makes a random ringing noise as I am driving?
Why does my Android car navigation make an alert noise when I lift my foot off the brake or random ringing noises while driving?
Based on the manual for the Android Car Navigation system, these audio alerts are likely related to safety features or wiring configurations. Here are the most probable causes:
To troubleshoot, try disabling notifications in the Android settings or checking the wiring of the brown 'Parking' wire to ensure it is not triggering incorrectly.
Read the full Q&A page
PLEASE TELL ME HOW WE CAN ENLARGE THE PRINT ON OUR NEW UNIT….WE CANNOT MAKE POUT THE LETTERS WHEN TRYING TO INPUT AN ADDRESS FOR THE GPS….THANK YOU!!!
How can I enlarge the font size on my Android car navigation unit?
To enlarge the print or font size on your Android car navigation unit, you will need to access the standard Android system settings rather than the specific car-interface settings. Follow these steps:
If your specific unit has a custom interface that hides these options, you may need to enable Developer Options first. To do this, go to About Device and tap the Version Number (or Build Number) 5 or more times until a message appears saying you are in developer mode. You can then check the Developer Options menu for further display scaling settings.
Note: If the GPS application itself has small text, check the settings within that specific app (e.g., Google Maps or the built-in Navigation app) for "Map Scale" or "Text Size" options.
Read the full Q&A page
How can I change the ring tone ?
How can I change the ringtone on my Android car navigation system?
Based on the provided manual for the Android Car Navigation system, there are no specific instructions for changing the ringtone file itself. However, you can manage the volume settings for Bluetooth calls separately from other media.
To adjust Bluetooth volume settings:
If you are looking to change the actual sound file, this is typically handled through the Bluetooth menu or the general Android Settings (found by swiping down the notification shade and clicking the gear icon), though specific ringtone selection is not detailed in this manual. If your device is an ATOTO model, you may also check the Sound Settings to adjust the 32-band EQ and other audio preferences.
Read the full Q&A page
The audio is not heard and it does not recognize a micro SD card.
MY IPHONE IS THE 14 pro MODEL. They have system software update. Where can I do the update?
No se escucha el audio y no reconoce tarjeta micro SD.
MI IPHONE ES EL MODELO 14 pro. cuentan con actualizacion de software del sistema. Donde puedo hacer la actualizacion
MY IPHONE IS THE 14 pro MODEL. They have system software update. Where can I do the update?
No se escucha el audio y no reconoce tarjeta micro SD.
MI IPHONE ES EL MODELO 14 pro. cuentan con actualizacion de software del sistema. Donde puedo hacer la actualizacion
How do I troubleshoot audio and SD card issues on my Android car navigation system, and where can I find system software updates?
Based on the Android Car Navigation User Manual, here are the steps to address your issues:
Note: Regarding your iPhone 14 Pro, if you are looking to update the phone itself, that must be done through the iPhone's own settings (Settings > General > Software Update). For connecting it to the car unit, use the Mirror link or CarPlay (often via the "Car Link" app) as described in the manual.
Read the full Q&A page
Hello, question: when I connect my android or apple cell phone to the stereo, only the front speakers are heard, I put the radio on and all the speakers are heard. What can be?
Hola, consulta: cuando conecto al stereo mi celular android o apple solo se escuchan las bocinas de enfrente, pongo el radio y se escuchan todas las bocinas. Que puede ser?
Hola, consulta: cuando conecto al stereo mi celular android o apple solo se escuchan las bocinas de enfrente, pongo el radio y se escuchan todas las bocinas. Que puede ser?
Why does audio only play through the front speakers when a phone is connected, but all speakers work with the radio?
This issue is typically related to the Sound Settings or Fader/Balance configuration specifically for multimedia/Bluetooth sources, which are often handled separately from the radio source. Follow these steps to troubleshoot:
Read the full Q&A page
Need information on setting up the harness to a Honda Accord 2013.
How do I set up the wiring harness for an Android navigation system in a 2013 Honda Accord?
Setting up the harness for a 2013 Honda Accord typically requires a vehicle-specific wiring adapter and potentially a CANBUS decoder to retain factory functions like steering wheel controls and climate displays. While the manual provides a general pinout, you should follow these steps for your specific vehicle:
Note: If your Accord has a factory premium sound system or navigation, you may need a specialized harness that includes RCA outputs to interface with the factory amplifier.
Read the full Q&A page
The retractable screen did not come back and I want it to restart from the factory to solve the problem as I do, thank you.
la pantalla retractil no volvió a salir y quiero que se inicie de fabrica nuevamente para solucionar el problema como le hago gracias.
la pantalla retractil no volvió a salir y quiero que se inicie de fabrica nuevamente para solucionar el problema como le hago gracias.
How do I perform a factory reset on my Android car navigation system to fix a retractable screen issue?
To perform a factory reset on your Android car navigation system, follow these steps based on the user manual:
If you are looking for advanced factory settings (parameter settings), the manual mentions a password: 8888.
Note: If the screen is physically stuck and does not retract or deploy, a software reset may not solve the problem if there is a mechanical failure. Ensure there are no obstructions and that the unit is receiving stable 12V power. If the screen remains unresponsive after a reset, professional repair may be required as per the manual's safety precautions.
Read the full Q&A page