BY967D Wireless Android Auto Adapter
“
Product Information
Specifications:
- Model: BY967D
- Includes: 1 x Wireless Android Auto Adapter, 1 x Quick User
Guide, 1 x USB to USB C Adapter, 1 x User Manual
Product Usage Instructions
Connecting Wireless Android Auto:
- Ensure your mobile phone is connected only to Bluetooth and
Wi-Fi signals of the BY967D-XXXX wireless number. - During the connection process, make sure only the user’s
Android phone is connected to Bluetooth and Wi-Fi signal
BY967D-XXXX from the wireless Android Auto adapter. - For Bluetooth pairing, ensure that the pairing is completed.
After that, the device only requires Wi-Fi to operate. You can turn
off Bluetooth, but it needs to be turned on again for automatic
pairing next time.
Using Wireless Android Auto Feature:
While using the wireless Android Auto feature:
- Your mobile phone’s Wi-Fi will be connected to BY967D-XXXX
Wi-Fi broadcasted by the adapter. Other Wi-Fi connections cannot be
used simultaneously. - Ensure your phone’s Wi-Fi and Bluetooth are available. Set the
adapter’s BY967D-XXXX Wi-Fi signal network to Auto Join in Settings
> WLAN > Click the symbol on BY967D-XXXX > Turn on
Auto-Join.
Online Firmware Upgrade:
- If the adapter works well, updating firmware is not recommended
unless necessary. - If issues persist, try upgrading firmware by connecting to
192.168.18.9 and following the upgrade steps mentioned in the
manual. - If problems occur after upgrading, restore factory
settings.
Frequently Asked Questions (FAQ)
Q: How do I upgrade the firmware of the BY967D adapter?
A: To upgrade the firmware, follow the steps mentioned in the
user manual under the ‘Online Firmware Upgrade’ section. Ensure
your phone’s Wi-Fi and Bluetooth are available for a successful
upgrade.
Q: Can I use other Wi-Fi connections while using the wireless
Android Auto feature?
A: No, during the usage of wireless Android Auto, your phone’s
Wi-Fi should be connected to BY967D-XXXX Wi-Fi broadcasted by the
adapter. Other Wi-Fi connections may cause conflicts and need to be
manually disconnected.
“`
BY967D
Upgrade steps/Enter the Settings screen—– 10 If the update fails, try the following———- 10 For Android phones, the steps are as follows–10
13
5. When connecting wireless Android Auto, please ensure that it is only connected to Bluetooth and Wi-Fi signals BY967D-XXXX of the wireless number, the product serial number shall be based
6. During the connection process, please ensure that only the user’s Android Phones are connected to Bluetooth and Wi-Fi signal BY967D-XXXX from the wireless Android Auto adapter. Tip: (xxxx is the product serial number, the product serial number is based on the actual receipt of goods)
Notice: “BY967D-XXXX” Bluetooth plays a pairing role in the operation of the Android Auto. When the pairing is completed, it only needs Wi-Fi to keep working, so it doesn’t matter if you turn off Bluetooth. Please note that when you use it next time, you still need to turn on the phone’s Bluetooth, so that the wireless Android Auto adapter,can be automatically paired and connected.
1. While using the wireless Android Auto feature, your mobile phone’s Wi-Fi will be connected to “BY967D-XXXX” Wi-Fi which is broadcasted by the wireless Android Auto adapter. Please note that other Wi-Fi connections cannot be used during this time. If the other Wi-Fi conflicts with the Wi-Fi of the wireless Android Auto adapter, it may be necessary to manually disconnect the other Wi-Fi to maintain the use of wireless Android Auto.
2. The automatic connection feat wireless Android Auto adapter requires you to keep your phone’s Wi-Fi and Bluetooth available. In addition, please set the wireless Android Auto adapter’s BY967D-XXXX Wi-Fi signal network to “Auto Join”:
B. Settings > WLAN> Click the” “symbol on the far right of “BY967D-XXXX” > Turn on “Auto-Join”.
BY967D-XXXX (xxxx is the BY967D-XXXX
1 x Wireless Android Auto Adapter 1 x Quick User Guide 1 x USB to USB C Adapter 1 x User Manua
BY967D-XXXX
BY967D-XXXX BY967D-XXXX
BY967D-XXXX BY967D-XXXX
BY967D-XXXX
BY967D-XXXX
Online firmware upgrade: 1. If the adapter works, it means the current version is
suitable for your car. Updating the firmware is not recommended in this case to avoid any issues. 2. Try this solution for a problem that cannot be solved by the solutions in the “FQA” list. 3. If there is any problem after upgrading, please “restore factory Settings”.
Upgrade steps/Enter the Settings screen:
1. Turn on the power of the adapter. It is recommended to use the charging port only.
2. Connect the WiFi “BY967D-XXXX” of the adapter, and the password is “12345678”.Open your browser, type 192.168.18.9, and click Update.
3. On the same page, you can also fill in the car make, model year, and problem details, then click “Submit” to report the problem. Our Project The teacher will document your problem and research possible solutions.
4. After the upgrade, please restart the phone once before using the adapter.
* If the update fails, try the following:
A. Turn off the Bluetooth of the mobile phone; B. Enter the WLAN Settings of the phone and ignore the
network of the adapter; C. Find and reconnect “BY967D-XXXX” in the WiFi list of
your phone. D. Try updating again on “192.168.18.9”,
* If your issue is not resolved, please contact us for a refund (no return required).
For Android phones, the steps are as follows:
Note: Take Samsung mobile phone as an example:
1. Power on the adapter 2. Open the phone and enter the Settings page
10
3. Enter WiFi Settings, connect WiFi “BY967D-XXXX” with the same Bluetooth name of the product, and password “12345678”
Picture 1
Picture 2
4. Enter the browser, enter the URL: 192.168.18.9, and enter the URL, the page slides, click “SWITCHP2P”, the pop-up interface (sometimes not This interface will pop up, at this time, you can close and open the phone WiFi, and no popup window has no effect, the function can be opened)
Picture 3
Picture 4
Picture 5
5. Go back to the WiFi connection interface, click the three points on the right, click “Wi-FiDirect”, and click the WiFi connection with the same Bluetooth name of the product.
(Note: Each brand of mobile phone has a different way of opening WiFi direct connection. Please be sure to open WiFi direct connection and directly connect to the WiFi with the same Bluetooth name of the product.)
6. At this time, you can use the phone data to enter the background (refresh the background website once), and you can select the version update
12
13
14
15
BY967D-XXXX
BY967D-XXXX 18
3. Open Google Chrome and enter “192.168.18.9”.
4. Open Google Chrome and enter “192.168.18.9”. (*Please refer to Picture 1-Picture 3 for details).
vnilrgle
Documents / Resources
 | Android Auto BY967D Wireless Android Auto Adapter [pdf] User Manual BY967D Wireless Android Auto Adapter, BY967D, Wireless Android Auto Adapter, Android Auto Adapter, Auto Adapter |