AND BK-SIM7670 Breakout Board

AND BK-SIM7670 Breakout Board

Preparation

Board BK-SIM7670
Serial tool sscom32E.exe

Overview

Module feature

  • The SIM7670 Series is the LTE Cat 1bis module based on the latest QCX216 chipset that supports wireless communication modes of LTE-FDD/LTE-TDD. It supports maximum 10Mbps downlink rate and 5Mbps uplink rate
  • Control Via AT Command, Rich interfaces including UART,USB2.0
  • Operation temperature:-40℃ to +85 ℃
  • GNSS optional

BOARD overview

BOARD Overview

CN2 Nano SIM card socket
CN101 7pin 2.54mm header interface
CN1 USB interface
D5 NET LIGHT indicator(Green)
U2 The power conversion chip
J1 LTE ANT
J2 GPS ANT(Optional)
TP1 4.0V

PCBA dimension: 37*37mm.

PCBA Dimension

Pin Definition

Pin Definition

Note: VCC range is from 5.0V to 10V, 5.0V is recommended. Please ensure 0.8A current for the VCC pin. TXD /RXD are 3.3V TTL level which can be directly connected with 3.3V MCU.

Pin definition of 6pin connector

Pin name Pin number Mark on PCB Description Comment
SLEEP 0 S control module into sleep mode Connect with DTR via Q4
GND 1,6 G GND  
VCC 2 V The power supply 5V-10V
PWRKEY 3 K Power down Shorted with GND via
R104 by default
TXD 4 T Transmit Data TTL Series data Output
RXD 5 R Receives Data TTL Series data Input

How to use TXD and RXD (Default baud rate is 115200bps)

How To Use TXD And RXD

How To Test The Bk-sim7670 By At Command Via Uart

  1. Installing LTE antenna, GPS antenna and NanoSIM card for BK-SIM7670 Board.
  2. Feed power supply to VCC pin. (Note: VCC range is from 5.0V to 10V. 5.0V is recommended.)
  3. GREEN LED indicator, Blinking shows registration successful.
    How To Test The Bk-sim7670 By At Command Via Uart
  4. Open serial software Icon and choose right serial number, Baud rate as below, please keep “SendNew” selected:
    How To Test The Bk-sim7670 By At Command Via Uart
    How To Test The Bk-sim7670 By At Command Via Uart

How To Test The Bk-sim7670 By At Command Via Usb

Remove all connection on CN101 7pin connector, Power up the SIM7670 Breakout board only via USB, SIM7670G is driver free under win10.

How To Test The Bk-sim7670 By At Command Via Usb

Select the 1st one, COM44, 115200bps and SendNew, you can repeat all command in Item4.4.

Package List

Name Qty Unit
BK-SIM7670 1 Pcs

Customer Support

AND Wireless : http://www.and-global.com
OEM PCBA : http://www.buypcba.com
Retail Store : http://www.aliexpress.com/store/605000
Golden supplier on Alibaba : http://and-global.en.alibaba.com
Email : info@and-global.com
Tel : +86-755-28099797

Logo

Documents / Resources

AND BK-SIM7670 Breakout Board [pdf] User Manual
BK-SIM7670 Breakout Board, BK-SIM7670, Breakout Board, Board

References

Leave a comment

Your email address will not be published. Required fields are marked *