Anbaole Tech RC-200 Voice Remote Control
RC-200 Voice Remote Control Instruction Manual
Product Diagram
Welcome to Your New RC-200 Voice Remote Control!
Thank you for choosing the RC-200 Voice Remote Control, a device designed to enhance your viewing experience with seamless voice control and easy-to-navigate features. Our remote is crafted for convenience, allowing you to effortlessly control your smart TV just by speaking.
Getting Started
To begin using your RC-200, you will need to install 2 x MA 1.5V batteries (not included). Insert the batteries into the compartment, ensuring correct polarity alignment, and you’re ready to explore the capabilities of your new remote.
Voice Pairing Instructions
For optimal use of the voice control features, please follow the Bluetooth pairing guide provided in this manual. This will enable you to use voice commands to control your TV and other compatible devices effortlessly. Make sure that your TV supports Google Assistant and Bluetooth connectivity for a smooth setup.
Description
- Model: RC-200
- Color: Black
- Battery Type: 2 x MA batteries (not included)
- Button Life: > 100,000 presses
- Transmission Range: 10 meters
Packing List
- 1 x Remote Control
- 1 x Instruction Manual
- 1 x Packing Box
Features:
Simple Setup: Compatible with Smart TVs featuring built-in Google Assistant. Ensure Bluetooth is connected when using voice recognition.
Easy to Search and Control: Simply press the voice control button and speak your search query.
Battery Requirements: Requires 2 x MA 1.5V batteries (not included).
Programming Function Instructions
- Suppress the power button in the TV control area.
- Press the button for the function to be programmed; the indicator light will begin to blink.
- Aim the TV remote at the TV box and suppress the button on the TV remote that needs to be programmed.
- lf the function is copied successfully, the indicator light will flash three times and remain lit. Use the same process to program other functions.
- lf programming fails, the indicator light will flash five times; you will need to repeat steps 2-4.
- Press any button outside the TV control area to exit programming mode.
Bluetooth Pairing Guide:
- Keep the remote and the TV box within pairing distance.
- Press the “OK” and down ‘return’ at the same time until the indicator light flashes for pairing.
- Turn on Bluetooth in the box settings to connect to the RC-200 device.
- Bluetooth pairing is successful when the indicator light turns off.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Frequently Asked Questions
- Q: What should I do if the device causes interference?
A: If the device causes interference, try adjusting its placement or moving it away from other electronic devices. Ensure that it is not in close proximity to sources of interference. - Q: Can I modify the device?
A: No, any modifications to the device that are not approved by the responsible party for compliance may void your authority to operate the equipment. It is recommended to refrain from making unauthorized changes.
Documents / Resources
 |
Anbaole Tech RC-200 Voice Remote Control [pdf] Instruction Manual 2BK8M-RC-200, 2BK8MRC200, rc 200, RC-200 Voice Remote Control, Voice Remote Control, Remote Control |