Here”s what you”ll get

1. Ambi Climate Mini
2. Wall Mount, Tape,
   Screw and Wall anchor
3. USB Cable (1.Sm)
4. USB Adapter (100-240V AC) (Plug for your country may have a different appearance)

Getting to know your Ambi Climate Mini

1. Status LED
2. USB Type-C Port

Connect the Ambi Climate Mini

Download the Ambi Climate App on the App Store or Google Play Store. Follow the instructions in the app to connect the Ambi Climate Mini to your phone.

Finding the perfect location for your Ambi Climate Mini

Make sure:

1. It has direct line of sight to the IR receiver of your AC unit and is close to where you normally are in the room.
2. It is within range of your WiFi signal (preferably close to your router if possible).
3. It isn’t near something hot or cold (such as next to a heater, in direct sunlight, or right in front of the AC).

Placing your Ambi Climate Mini on top of a table

1. To start up your Ambi Climate Mini, plug in the USB Type-C plug into the back of the Ambi Climate Mini and attach the USB Type-A plug to the power adapter.
2. Make sure it sits on a non-insulating flat surface (fabric-covered surfaces are not recommended).

Wall mounting your Ambi Climate Mini (Optional)

1. Peel off the protective film(tape) and press the wall mount firmly against the wall for about 30 seconds; or
2. Screw the wall mount on the wall with the screw provided.
3. Attach the back of Ambi Climate Mini to the wall mount.
4. Plug it into the nearest socket.

Have questions?

We’d love to help! Visit support.ambiclimate.com or send us an email support@ambiclimate.com