Amazon Tap User Manual

Tip: Widgets allow easier access to Alexa from your device home screen. Alexa widgets become available in the device widget menu after you sign in to the Alexa app. On iOS (iOS 14 or newer) or Android devices, long-press the home page of your device and follow the instructions to add widgets.

Set Up Your Amazon Tap

Use the Alexa app to set up your Amazon Tap.

Open the Alexa app.
Open More and select Add a Device.

Select Amazon Echo, and then select Amazon Tap.
Follow the instructions to set up your device.

Device Settings and Features:

Connect Your Amazon Tap to Wi-Fi

To stream audio and talk to Alexa, connect your Amazon Tap to Wi-Fi.

Note: Amazon Tap connects to 2.4 Ghz Wi-Fi networks and mobile hotspots that use the 802.11b / g / n standard. Amazon Tap does not connect to ad-hoc (or peer-to-peer) networks.

Open the Alexa app .

Select Devices .
Select Echo & Alexa, and then select your Amazon Tap.

Select Change next to Wi-Fi Network.
Press and hold the Wi-Fi / Bluetooth button on your Amazon Tap. Wait until the indicator turns orange and your Wi-Fi network appears in the app (about 25 seconds).

Select Connect. If your network does not appear, select Add a Network or Rescan.

Connect Your Amazon Tap to a Wi-Fi Hotspot

If you’re not near your home Wi-Fi network, connect your Amazon Tap to a Wi-Fi hotspot.

Go to the settings menu on your phone, and search for a Wi-Fi hotspot.
Copy the network name and hotspot password.

Open the Alexa app .
Select Devices .

Select Echo & Alexa, and then select your Amazon Tap.
Select Change next to Wi-Fi Network. Choose from a list of available Wi-Fi networks.

Scroll down and select Use this device as a Wi-Fi hotspot.
Select Start, and then enter the network name and password and select Connect.

Go to your phone’s settings menu, and turn on your Wi-Fi hotspot.

Alexa confirms a successful connection.

Connect Your Phone to Amazon Tap

To stream audio from your phone, connect it to Amazon Tap.

Note: Alexa doesn’t receive or read phone calls, text messages, and other notifications from your mobile device, or send audio from your Amazon Tap to Bluetooth speakers or headphones.

Put your phone in Bluetooth pairing mode.
Press the Wi-Fi/Bluetooth button on your Amazon Tap. Alexa lets you know when Amazon Tap is ready to pair.
Open the Bluetooth settings menu on your phone, and select Amazon Tap.

Alexa tells you when the connection is successful.

Remove Paired Bluetooth Devices from Amazon Tap

To remove paired Bluetooth devices from Amazon Tap, use the Alexa app.

Open the Alexa app .
Select Devices .
Select your Amazon Tap.
Select Bluetooth Devices, and then select Clear.

Turn On Hands-Free Mode for Amazon Tap

Enable hands-free mode to use Amazon Tap with a wake word.

Note: “Alexa” is the only wake word available for hands-free mode on Amazon Tap.

Open the Alexa app .
Select Devices.
Select Echo & Alexa, and then select your Amazon Tap.
Select Hands-Free Mode to toggle to the hands-free feature.

Troubleshooting:

Amazon Tap Doesn’t Respond to Requests

Amazon Tap doesn’t turn on or respond to your commands.

Make sure that you’re using the included power adapter. Other adapters do not provide enough power for Amazon Tap to turn on and work correctly.
Check that your device is connected wirelessly. If your signal is poor, try restarting your modem and router.
Turn your device off and back on again. Press and hold the power button until it dims (about 5 seconds). Then press the power button again.

If your Amazon Tap is still unresponsive, reset your device.

Amazon Tap Isn’t Pairing with Your Phone

If Amazon Tap is not pairing with your phone, check that the battery is charged.

Turn your device off and back on again. Press and hold the Power button until it dims (about 5 seconds). Then press the Power button again.

Check that Amazon Tap is charged. Low battery can cause issues with Bluetooth connectivity.
Move your phone closer to the Amazon Tap to reduce interference.
Use the Alexa app to clear your Bluetooth connections. Then, pair your phone to Amazon Tap again.

Reset Your Amazon Tap

If your Amazon Tap is unresponsive, or you want to erase your device settings, factory reset your device.

Tip: Having trouble with your Amazon Tap? Restart your device first to see if it resolves the problem. Press and hold the Power button until the button dims (about 5 seconds). Then press and hold the Power button again.

Press and hold the Wi-Fi/Bluetooth button and Previous button until the light indicators turn orange, then blue (about 12 seconds).
Wait for the light indicators to turn orange. Use the Alexa app to set up your Amazon Tap.

Deregister Your Device

If you no longer wish to use your device, you can deregister it from your Amazon account.

If you would like to give your device as a gift or wish to register the device under a different account, you will need to deregister the device from your account.

To deregister your device:

Go to Manage Your Content and Devices and log in to your account.
Click Devices.
Select your device and click Deregister.

References

User Manual