M5StickC Plus2 ኦፕሬሽን መመሪያ
የፋብሪካ ፋርምዌር
መሣሪያው የአሠራር ችግሮች ሲያጋጥመው፣ የሃርድዌር ብልሽት ካለ ለመፈተሽ የፋብሪካውን ፈርምዌር እንደገና ለማብረቅ መሞከር ይችላሉ። የሚከተለውን አጋዥ ስልጠና ይመልከቱ። የፋብሪካውን firmware በመሳሪያው ላይ ለማብረቅ M5Burner firmware ብልጭ ድርግም የሚል መሳሪያ ይጠቀሙ።
የሚጠየቁ ጥያቄዎች
Q1፡ ለምን የኔ M5StickC Plus2 ጥቁር ስክሪን ነው/አይነሳም?
መፍትሄዎች፡- M5Burner Burn official Factory Firmware“M5StickCPlus2 User Demo”
Q2፡ ለምንድነው የሚሰራው 3 ሰአት ብቻ? በ 1 ደቂቃ ውስጥ 100% ለምን ይሞላል ፣ የሚጠፋውን የኃይል መሙያ ገመድ ያስወግዱት?
Solutions: “Bruce for Stack plus2”This is an unofficial firmware. Flashing unofficial firmware can void your warranty, cause instability, and expose your device to security risks. Proceed with caution.
እባክዎን ይፋዊ firmware ያቃጥሉ።
አዘገጃጀት
- የፋየርዌር ብልጭ ድርግም የሚሉ መሳሪያዎች ማውረድን ለማጠናቀቅ የM5Burner አጋዥ ስልጠናን ይመልከቱ እና ከዚያ ተዛማጅ firmware ለማውረድ ከታች ያለውን ምስል ይመልከቱ።
የማውረድ አገናኝ፡ https://docs.m5stack.com/en/uiflow/m5burner/intro
የዩኤስቢ ነጂ ጭነት
የአሽከርካሪ ጭነት ጠቃሚ ምክር
ከስር ያለው ሊንክ ይጫኑ ኦፕሬቲንግ ሲስተሙን የሚዛመደውን ሾፌር ለማውረድ። ለ CP34X (ለ CH9102 ስሪት) የአሽከርካሪዎች ፓኬጅ ከኦፕሬቲንግ ሲስተምዎ ጋር የሚዛመደውን የመጫኛ ጥቅል በመምረጥ ማውረድ እና መጫን ይቻላል ። በፕሮግራም ማውረድ ላይ ችግሮች ካጋጠሙዎት (እንደ ጊዜ ማብቂያ ወይም "ለ RAM ኢላማ መጻፍ አልተሳካም" ስህተቶች) ፣ የመሳሪያውን ሾፌር እንደገና ለመጫን ይሞክሩ።
CH9102_VCP_SER_ዊንዶውስ
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_SER_Windows.exe
CH9102_VCP_SER_MacOS v1.7
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_MacOS_v1.7.zip
በ MacOS ላይ የወደብ ምርጫ
በ MacOS ላይ ሁለት የሚገኙ ወደቦች ሊኖሩ ይችላሉ። እነሱን ሲጠቀሙ፣ እባክዎን wchmodem የሚባል ወደብ ይምረጡ።
ወደብ ምርጫ
መሳሪያውን በዩኤስቢ ገመድ ከኮምፒዩተር ጋር ያገናኙ. የአሽከርካሪው መጫኑ ከተጠናቀቀ በኋላ በ M5Burner ውስጥ ያለውን ተዛማጅ የመሳሪያ ወደብ መምረጥ ይችላሉ.
ማቃጠል
የመብረቅ ሂደቱን ለመጀመር "አቃጥል" ን ጠቅ ያድርጉ.
StickC-Plus2
SKU:K016-P2
መግለጫ
StickC-Plus2 is the iterative version of Stick C-Plus. It is powered by the ESP32-PICO-V3-02 chip, providing Wi-Fi connectivity. Within its compact body, it integrates a rich variety of hardware resources, including IR emitter, RTC, microphone, LED, IMU, buttons, buzzer, and more. It features a 1.14-inch TFT display driven by the ST7789V2 with a resolution of 135 x 240.
The battery capacity has been increased to 200 mAh, and the interface is compatible with both HAT and Unit series modules.
This sleek and compact development tool can ignite unlimited creativity. StickC-Plus2 helps you quickly build IoT product prototypes and greatly simplifies the entire development process. Even beginners who are new to programming can create interesting applications and apply them in real life.
አጋዥ ስልጠና
UIFlow
This tutorial will introduce how to control the StickC-Plus2 device through the UIFlow graphical programming platform.
UiFlow2
This tutorial will introduce how to control the StickC-Plus2 device through the UiFlow2 graphical programming platform.
አርዱዪኖ አይዲኢ
This tutorial will introduce how to program and control the StickC-Plus2 device using the Arduino IDE.
ማስታወሻ
Port Not Recognized
When using a C-to-C cable, if the port cannot be recognized, please perform the following power-on procedure:
disconnect StickC-Plus2, power it off (long-press the power button until the green LED lights up), then reconnect the USB cable to power on.
ባህሪያት
- Based on ESP32-PICO-V3-02 with Wi-Fi support
- Built-in 3-axis accelerometer and 3-axis gyroscope
- Integrated IR emitter
- Built-in RTC
- የተዋሃደ ማይክሮፎን
- User buttons, 1.14-inch LCD, power/reset button
- 200 mAh Li-ion ባትሪ
- የማስፋፊያ ማገናኛ
- Integrated passive buzzer
- Wearable & mountable
- የልማት መድረክ
- UiFlow1
- UiFlow2
- አርዱዪኖ አይዲኢ
- ESP-IDF
- PlatformIO
ያካትታል
- 1 x StickC-Plus2
መተግበሪያዎች
- ተለባሽ መሳሪያዎች
- IoT controller
- STEM education
- DIY ፕሮጀክቶች
- ስማርት-ቤት መሣሪያዎች
ዝርዝሮች
| ዝርዝር መግለጫ | መለኪያ |
| ሶሲ | ESP32-PICO-V3-02 240 MHz dual-core, Wi-Fi, 2 MB PSRAM, 8 MB Flash |
| ግብዓት Voltage | 5 ቮ @ 500 mA |
| በይነገጽ | Type-C x 1, GROVE (I2C + I/O + UART) x 1 |
| LCD ማያ | 1.14 inch, 135 x 240 Color TFT LCD, ST7789V2 |
| ማይክሮፎን | SPM1423 |
| አዝራሮች | User buttons x 3 |
| LED | Green LED x 1 (non-programmable, sleep indicator) Red LED x 1 (shares control pin G19 with IR emitter) |
| RTC | BM8563 |
| Buzzer | On-board passive buzzer |
| አይኤምዩ | MPU6886 |
| አንቴና | 2.4 G 3D antenna |
| ውጫዊ ፒኖች | G0, G25/G26, G36, G32, G33 |
| ባትሪ | 200 mAh @ 3.7 V, inside |
| የአሠራር ሙቀት | 0 ~ 40 ° ሴ |
| ማቀፊያ | ፕላስቲክ (ፒሲ) |
| የምርት መጠን | 48.0 x 24.0 x 13.5 ሚሜ |
| የምርት ክብደት | 16.7 ግ |
| የጥቅል መጠን | 104.4 x 65.0 x 18.0 ሚሜ |
| አጠቃላይ ክብደት | 26.3 ግ |
የአሠራር መመሪያዎች
ኃይል አብራ/ አጥፋ
Power-on: Press the “BUTTON C” for more than 2 seconds, or wake up via the RTC IRQ signal. After the wake-up signal is triggered, the program must set the HOLD pin (G4) to high (1) to keep the power on, otherwise the device will shut down again.
Power-off: Without external USB power, press “BUTTON C” for more than 6 seconds, or set HOLD (GPIO4)=0 in the program to power off. While USB is connected, pressing “BUTTON C” for more than 6 seconds will turn off the screen and enter sleep mode (not a full power-off).
መርሃግብር
ፒን ካርታ
Red LED & IR Emitter | Button A | Button B | Buzzer
| ESP32-PICO-V3-02 | ጂፒዮ 19 | ጂፒዮ 37 | ጂፒዮ 39 | ጂፒዮ 35 | ጂፒዮ 2 |
| IR Emitter & Red LED | IR emitter & Red LED pin | ||||
| አዝራር ኤ | አዝራር ኤ | ||||
| አዝራር ለ | አዝራር ለ | ||||
| አዝራር ሲ | አዝራር ሲ | ||||
| ማለፊያ ባዝዘር | Buzzer |
ቀለም TFT ማሳያ
Driver IC: ST7789V2
ጥራት፡ 135 x 240
| ESP32-PICO-V3-02 | ጂ15 | ጂ13 | ጂ14 | ጂ12 | G5 | ጂ27 |
| TFT ማሳያ | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS | TFT_BL |
Microphone MIC (SPM1423)
| ESP32-PICO-V3-02 | G0 | ጂ34 |
| MIC SPM1423 | CLK | ዳታ |
6-Axis IMU (MPU6886) & RTC BM8563
| ESP32-PICO-V3-02 | ጂ22 | ጂ21 | ጂ19 |
| IMU MPU6886 | ኤስ.ኤል.ኤል | ኤስዲኤ | |
| BM8563 | ኤስ.ኤል.ኤል | ኤስዲኤ | |
| IR ኢሚስተር | TX | ||
| ቀይ LED | TX |
HY2.0-4P
| HY2.0-4P | ጥቁር | ቀይ | ቢጫ | ነጭ |
| PORT.CUSTOM | ጂኤንዲ | 5V | ጂ32 | ጂ33 |
የሞዴል መጠን
የውሂብ ሉሆች
ESP32-PICO-V3-02
ST7789V2
BM8563
MPU6886
SPM1423
ሶፍትዌሮች
አርዱዪኖ
StickC-Plus2 Arduino Quick Start
StickC-Plus2 Library
StickC-Plus2 Factory Test Firmware
UiFlow1
StickC-Plus2 UiFlow1 Quick Start
UiFlow2
StickC-Plus2 UiFlow2 Quick Start
PlatformIO
[env:m5stack-stickc-plus2]
platform = espressif32@6.7.0
board = m5stick-c
ማዕቀፍ = arduino
upload_speed = 1500000
monitor_speed = 115200
build_flags =
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-DCORE_DEBUG_LEVEL=5
lib_deps =
M5Unified=https://github.com/m5stack/M5Unified
የዩኤስቢ ሾፌር
Click the links below to download the driver that matches your operating system. The package contains CP34X drivers (for CH9102). After extracting the archive, run the installer that matches your OS bit-depth.
If you encounter issues such as timeout or “Failed to write to target RAM” during downloading, please try reinstalling the driver.
| የአሽከርካሪ ስም | Supported Chip | አውርድ |
| CH9102_VCP_SER_ዊንዶውስ | CH9102 | አውርድ |
| CH9102_VCP_SER_MacOS v1.7 | CH9102 | አውርድ |
macOS Port Selection
Two serial ports may appear on macOS. Please select the port named wchmodem.
Easy loader
Easy Loader is a lightweight program flasher that comes with a demonstration firmware. By following a few simple steps, you can flash it to the controller for quick functional verification.
| Easy loader | አውርድ | ማስታወሻ |
| Factory Test for Windows | ማውረድ | / |
ሌላ
StickC-Plus2 Restore Factory Firmware Guide
ቪዲዮ
StickC-Plus2 Feature Introduction
StackC Plus2 视频.mp4
የስሪት ለውጥ
| የተለቀቀበት ቀን | መግለጫ ቀይር | ማስታወሻ |
| / | የመጀመሪያ ልቀት | / |
| 2021-12 | Added sleep and wake-up function, version updated to v1.1 | / |
| 2023-12 | Removed PMIC AXP192, MCU changed from ESP32-PICO-D4 to ESP32-PICO-V3-02, different power-on/off method, version v2 | / |
የምርት ንጽጽር
የሃርድዌር ልዩነቶች
| ምርት ስም |
ሶሲ | የኃይል አስተዳደር | የባትሪ አቅም | ማህደረ ትውስታ | USB-UART Chip | ቀለም |
| Stick C-Plus | ESP32-PICO-D4 | AXP192 | 120 ሚአሰ | 520 KB SRAM + 4 MB Flash | CH522 | Red- orange |
| StickC-Plus2 | ESP32-PICO-V3-02 | / | 200 ሚአሰ | 2 MB PSRAM + 8 MB Flash | CH9102 | ብርቱካናማ |
Pin Differences
| የምርት ስም | IR | LED | ቲኤፍቲ | አዝራር ሀ | አዝራር ቢ | አዝራር ሲ (WAKE) |
ያዝ | ባትሪ ጥራዝtage አግኝ |
| M5STICKC PLUS | G9 | ጂ10 | MOSI (G15) CLK (G13) DC (G23) RST (G18) CS (G5) |
ጂ37 | ጂ39 | መደበኛ አዝራር |
/ | Via AXP192 |
| M5STICKC PLUS2 | ጂ19 | ጂ19 | MOSI (G15) CLK (G13) DC (G14) RST (G12) CS (G5) |
ጂ37 | ጂ39 | ጂ35 | G4 | ጂ38 |
Power On/Off Differences
| ምርት ስም | አብራ | ኃይል ጠፍቷል |
| Stick C- Plus2 | Press “BUTTON C” for more than 2 s, or wake via RTC IRQ. After wake-up, set HOLD (G4)=1 in the program to keep power on, otherwise the device will shut down again. |
Without USB power, press “BUTTON C” for more than 6 s, or set HOLD (GPIO4)=0 in the program to power off. With USB connected, pressing “BUTTON C” for more than 6 s will turn off the screen and enter sleep, but not a full power- off. |
Because StickC-Plus2 removes the PMIC AXP192, the power-on/off method differs from previous versions. As mentioned at the beginning of this document, the operation is largely similar, but the supported libraries will differ. Wi-Fi and IR signal strength have both been improved compared to the previous model.
ሰነዶች / መርጃዎች
 |
M5STACK ESP32-PICO-V3-02 IoT Development Module [pdf] የተጠቃሚ መመሪያ ESP32-PICO-V3-02 IoT Development Module, ESP32-PICO-V3-02, IoT Development Module, Development Module, Module |