IDEC FC6A-J8A1 8pt ጥራዝtagሠ የአሁኑ ግቤት Mod የተጠቃሚ መመሪያ

IDEC FC6A is a multifunctional PLC equipped with powerful IoT capabilities, all within compact hardware.
It supports the MQTT protocol, allowing the PLC to connect to MQTT brokers and cloud services. Additionally, it features a dedicated user interface for connecting to AWS IoT Core, enabling PLC programmers to easily establish communication between the PLC and AWS IoT Core.
ይህ መመሪያ IDEC FC6A Plus PLCን ከ AWS IoT Core ጋር እንዴት ማገናኘት እንደሚቻል ያብራራል።

የሃርድዌር መግለጫ

Datasheet/Brochure
https://us.idec.com/idec-us/en/USD/Programmable-Logic-Controller/Micro-PLC/FC6A-MicroSmart-PLC/c/MicroSmart_FC6A?page=1

በተጠቃሚ የቀረቡ እቃዎች
The package for the FC6A Plus CPU unit includes only the CPU unit and the I/O terminal block. Please note that you will need to provide a USB cable (USB-A to USB Mini-B) and a 24V power supply separately.

3ኛ ወገን ሊገዙ የሚችሉ ዕቃዎች
ምንም

የእርስዎን የልማት አካባቢ ያዘጋጁ

የመሳሪያዎች ጭነት (IDEs፣ Toolchains፣ SDKs)
የ PLC አፕሊኬሽኑን ፕሮግራም ለማድረግ WindLDR ሶፍትዌር ያስፈልጋል። IDEC የWindLDR ሶፍትዌርን ያካተተ አውቶሜሽን ኦርጋናይዘር ስብስብን ያቀርባል። አውቶሜሽን አደራጅ የሚገዛበት ክፍል ቁጥር SW1A-W1C ነው። እባክዎን ከ IDEC አከፋፋይ ወይም ከተፈቀደ የመስመር ላይ ቸርቻሪ ጋር ያረጋግጡ።
https://us.idec.com/idec-us/en/USD/Software/Automation-Organizer/p/SW1A-W1C

Set Up Device Hardware

<Power Supply>
The IDEC FC6A Plus requires a 24V DC power supply. Connect the 24V power supply unit to the connector on the FC6A.
<Internet Connection>
The FC6A Plus has two Ethernet ports. Port 1 is located on the upper side, and Port 2 is on the lower side of the unit. To connect to AWS IoT Core, use Port 1 (upper side).

Set up your AWS account and permissions

If you do not have an existing AWS account and user, refer to the online AWS documentation titled “Set Up Your AWS Account.” To get started, follow the steps outlined in the sections below:

ለAWS መለያ ይመዝገቡ
አስተዳደራዊ ተጠቃሚ ይፍጠሩ
Open the AWS IoT Console

AWS IoT መርጃዎችን ይፍጠሩ

Refer to the online AWS documentation at Create AWS IoT Resources. Follow the steps outlined in the sections below to provision resources for your device:

Create an AWS IoT policy
Create a Thing object

መሣሪያውን ከመረጃዎች ጋር ያቅርቡ

Refer to pages 12 and 18 in the following document.
These sections explain how to download the Root (Server) CA, the certificate file ለ FC6A, እና የግል ቁልፍ file, እንዲሁም እነሱን ወደ FC6A እንዴት ማስገባት እንደሚቻል.

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTTAWSIoTCoreTraining.pdfcontext=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Build the Demo

Refer to pages 1 to 22 in the following document. These pages explain how to connect the FC6A to AWS IoT Core. Follow the step-by-step tutorial to complete the connection process.

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

ማሳያውን ያሂዱ
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.

መልዕክቶችን በAWS IoT ኮር ያረጋግጡ

Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

መላ መፈለግ

Refer to page 33 in the following document, which details the MQTT connection error codes.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

ለበለጠ መረጃ፣ እባክዎን በAWS IoT መላ መፈለግ ላይ ያለውን የAWS የመስመር ላይ ሰነድ ይመልከቱ።

በተደጋጋሚ የሚጠየቁ ጥያቄዎች

What is the power supply requirement for IDEC FC6APlus?

The IDEC FC6A Plus requires a 24V DC power supply.

Where can I find the necessary software for programming the PLC application?

You can install WindLDR software from the Automation Organizer suite, available for purchase with part number SW1A-W1C.

Which Ethernet port should be used for connecting to AWS IoT Core?

Port 1 (upper side) of the FC6A Plus should be used for connecting to AWS IoT Core.

ሰነዶች / መርጃዎች

IDEC FC6A-J8A1 8pt ጥራዝtagሠ የአሁኑ ግቤት Mod [pdf] የተጠቃሚ መመሪያ
FC6A-J8A1 8pt ጥራዝtagሠ የአሁኑ ግቤት Mod፣ FC6A-J8A1፣ 8pt Voltagሠ የአሁኑ ግቤት Mod፣ ጥራዝtagሠ የአሁኑ ግቤት ሞድ፣ የአሁኑ ግቤት ሞድ፣ የግቤት ሞድ፣ ሞድ

ዋቢዎች

የተጠቃሚ መመሪያ

IDEC FC6A-J8A1 8pt ጥራዝtagሠ የአሁኑ ግቤት Mod

አልቋልview