DrayTek Internet Access Setup Instructions
መግቢያ
በውስጡ ፈጣን ማዋቀር group, you can configure the router to access the Internet with differnet modes (e.g. ISDN, PPPoE, PPPoA, MPoA and ADSL Access with ISDN dial backup).
For most users, Internet access is the primary application. The VigorX/i and VigorW/Gi support the ISDN WAN interface for Internet access and remote access. The following sections will explain more details of ISDN dial-up access and ADSL access setup. When you click Internet Access Setup from within the Quick Setup group, the following setup page will be shown.
Several methods are available for Internet Access.
ADSL
For ADSL access users, you need to know what kind of Internet access is provided by your ISP.
PPPoE/PPPoA : Enter your allocated username, password and DSL parameters according to the information provided by your ISP. If you want to connect to Internet all the time, you can check ‘Always On’.
MPoA (RFC 1483/2684): Enter your allocated WAN IP address(or enabling DHCP client to get IP from ISP) and DSL parameters according to the information provided by your ISP.
ወደ ISDN ( for VigorX/ Vigori/ VigorW/ VigorGi users only).
ለ ወደ ISDN Internet users, you should click Diaing to a Single ISP or Dialing to Dual ISPs for detailed Internet settings.
Dialing to a Single ISP: If you access the Internet via a single ISP, click here.
Dialing to Dual ISPs: If you have more than one ISP, click here to set two ISP dialup profiles. You will be able to dial to both ISPs at the same time. This is mainly for those ISPs that do not support Multiple-Link PPP (ML-PPP). In such cases dialing to two ISPs can increase the bandwidth utilization of the ISDN line to 128kbps data speed.
ማዋቀር
ADSL
Set DSL Parameters
Click on ‘Internet Access Setup’ on the right-hand menu. You will find two items : PPPoE/ PPPoA and MPoA (RFC 1483/2684). Then You can continuely enter setting menu according to the protocol which ISP assigns.
For PPPoE/PPPoA Users
Enter your allocated username, password and DSL parameters according to the information provided by your ISP. If you want to connect to Internet all the time, you can check ‘Always On’.
For MPoA (RFC 1483/2684) Users
Enter your allocated WAN IP address(or enabling DHCP client to get IP from ISP) and DSL parameters according to the information provided by your ISP.
If you have multiple public IPs to assign on the WAN interface. Click WAN IP Alias, the following windows will be pop-up. You can assign additional IPs on the page, and click OK.
Auto detect ATM/ DSL Setting
You can also use this function to detect ATM/ DSL setting. Please follow the instructions to operate. If your country is not on the list, it may take longer time to detect.
Configuring ISDN Dial backup for Broadband Access
ISDN Dial Backup Setup
Dial Backup Mode:
የለም፡
Disables the backup function.
Packet Trigger:
The backup line is disconnected until a packet from a local host triggers the router to establish a connection.
ሁልጊዜ በርቷል፡
If the broadband connection is no longer available, the backup line will automatically connect and stay always-on until the broadband connection is recovered.
For ISDN Dial Backup to function, you must create a dial backup profile. ጠቅ ያድርጉ Internet Access Setup > Dialing to a Single ISP to enter the backup profile የማዋቀር ገጽ.
Internet Statics
You can know the DSL status via status monitor.
ISDN (for VigorX/ Vigori/ VigorW/ VigorGi users only)
Connecting to a Single ISP
የአይኤስፒ መዳረሻ ማዋቀር
ISP Name: Enter your ISP name.
መደወያ ቁጥር፡- Enter the ISDN access number provided by your ISP.
የተጠቃሚ ስም፡ በእርስዎ አይኤስፒ የቀረበውን የተጠቃሚ ስም ያስገቡ።
የይለፍ ቃል፥ በእርስዎ አይኤስፒ የቀረበውን የይለፍ ቃል ያስገቡ።
Require ISP Callback (CBCP): If your ISP supports the callback function, check
Require ISP Callback (CBCP) to enable the Callback Control Protocol during PPP negotiations.
Scheduler (1-15): Enter the index of schedule profile to control the Internet ac- cess by time plan.
PPP/MP Setup
የአገናኝ አይነት There are four link types:
Link Disable
Disables the ISDN dial-out function.
Dialup 64Kbps
Uses one ISDN B channel for Internet access.
Dialup 128Kbps
Uses both ISDN B channels for Internet access.
Dialup BOD
BOD stands for bandwidth-on-demand. The router will use only one B channel under low traffic situations. Once the single B channel bandwidth is filled, the other B channel will be dialled automatically. For more detailed BOD parameter settings, refer to the የላቀ ማዋቀር group > ይደውሉ Control and PPP/ MP Setup.
PPP Authentication:
PAP Only
Sets the PPP session to use the PAP protocol to negotiate the username and password with the ISP.
PAP or CHAP
Sets the PPP session to use the PAP or CHAP protocols to negotiate the username and password with the ISP.
Idle Timeout:
Idle timeout means the router will disconnect after being idle for a preset amount of time. The default is 180 seconds. If you set the time to 0, the ISDN connection will remain always connected to the ISP.
IP Address Assignment Method (IPCP)
Fixed IP, and Fixed IP Address:
In most environments you should not change these settings as most ISPs provide a dynamic IP address for the router when it connects to the ISP. If your ISP provides a fixed IP address, check Yes and enter the IP address in the Fixed IP Address field.
Connecting to Dual ISPs
Most configuration parameters are the same as that in the last section. This page pro-vides an Enable Dual ISPs Function checkbox and adds a secondary ISP Setup section. Check the box and enter the second ISP information.
ሰነዶች / መርጃዎች
 |
DrayTek Internet Access Setup [pdf] መመሪያ Internet Access Setup, Access Setup |