CISCO IOS-XE የፕሮግራም ችሎታ እና አውቶሜሽን የኃይል ተጠቃሚ መመሪያ

IOS-XE የፕሮግራም ችሎታ እና ራስ-ሰር ኃይል

“

ዝርዝር መግለጫዎች፡-

• Product Name: Factory Reset Tool
• አምራች: Cisco
• ሞዴል: FR-2000
• Compatibility: Cisco devices running IOS-XE 17.10 onwards

የምርት አጠቃቀም መመሪያዎች፡-

Prerequisites for Performing Factory Reset:

Make sure you have administrative access to the device and are
familiar with IOS CLI commands.

Performing Factory Reset:

Follow the steps below to perform a factory reset:

ማጠቃለያ እርምጃዎች፡-

1. ዓይነት enable to enter privileged EXEC mode.
2. ዓይነት factory-reset all secure 3-pass ለመጀመር
   the factory reset process.

ዝርዝር እርምጃዎች፡-

1. ደረጃ 1፡ ትዕዛዝ ወይም ድርጊት
   enable

Exampላይ:
Device> enable

2. ደረጃ 2፡ factory-reset all secure
3-pass

Exampላይ:
Device# factory-reset all secure 3-pass

Performing Secure Erase:

If you need to perform a secure erase, follow the steps
ከታች፡

ማጠቃለያ እርምጃዎች፡-

1. ዓይነት enable to enter privileged EXEC mode.
2. ዓይነት factory-reset all secure to perform the
   secure erase.

ዝርዝር እርምጃዎች፡-

1. ደረጃ 1፡ ትዕዛዝ ወይም ድርጊት
   enable

Exampላይ:
Device> enable

2. ደረጃ 2፡ factory-reset all
secure

Exampላይ:
Device# factory-reset all secure

የሚጠየቁ ጥያቄዎች፡-

Q: What data is removed during a factory reset?

A: A factory reset removes all customer-specific data added to
the device since its shipping, including configurations, log files,
boot variables, core files, and credentials such as FIPS-related
ቁልፎች.

Q: How long does the secure erase process take?

A: The secure erase process typically takes around 5 to 10
minutes. After the erase, you will need to boot a new image from
TFTP as the previous image gets deleted.

""

የፋብሪካ ዳግም ማስጀመር
· Information About Factory Reset, on page 1 · Prerequisites for Performing Factory Reset, on page 1 · Performing Factory Reset, on page 1 · Performing Secure Erase, on page 2
ስለ ፋብሪካ ዳግም ማስጀመር መረጃ
Factory reset removes all the customer-specific data that has been added to a device since the time of its shipping. The erased data includes configurations, log files፣ የቡት ተለዋዋጮች፣ ኮር files, and credentials such as Federal Information Processing Standard-related (FIPS-related) keys. The device returns to its default license configuration after a factory reset.

Note The factory reset is performed through an IOS CLI. A copy of the running image is backed up and restored after the reset.

የፋብሪካ ዳግም ማስጀመርን ለማከናወን የሚያስፈልጉ ቅድመ ሁኔታዎች
· Ensure that all the software images, configurations, and personal data are backed up. · Ensure that there is uninterrupted power supply when the factory reset is in progress. · Ensure that you take a backup of the current image.

የፋብሪካ ዳግም ማስጀመርን በማከናወን ላይ

ማጠቃለያ እርምጃዎች

1. enable 2. factory-reset all secure 3-pass

የፋብሪካ ዳግም ማስጀመር 1

Performing Secure Erase

ዝርዝር እርምጃዎች

ደረጃ 1

ትዕዛዝ ወይም ድርጊት Exampላይ:
መሣሪያ> አንቃ

ደረጃ 2

factory-reset all secure 3-pass Exampላይ:
Device# factory-reset all secure 3-pass

Performing Secure Erase

ማጠቃለያ እርምጃዎች

1. enable 2. factory-reset all secure

ዝርዝር እርምጃዎች

ደረጃ 1

ትዕዛዝ ወይም ድርጊት Exampላይ:
መሣሪያ> አንቃ

ደረጃ 2

factory-reset all secure Exampላይ:
Device# factory-reset all secure

የፋብሪካ ዳግም ማስጀመር
ዓላማ ልዩ EXEC ሁነታን ያነቃል። ከተጠየቁ የይለፍ ቃልዎን ያስገቡ።
Removes sensitive data from all the partitions that are currently being cleaned up by the factory-reset all command. From Cisco IOS-XE 17.10 onwards, the following are the three passes to erase data in disk partitions:
· Write 0s · Write 1s · Write a random byte Note The factory reset takes 3 to 6 hours to be completed.
ዓላማ ልዩ EXEC ሁነታን ያነቃል። ከተጠየቁ የይለፍ ቃልዎን ያስገቡ።
Erases all user data and metadata from bootflash. The erase is compliant with the National Institute of Standards and Technology (NIST) standards. Note The erase takes around 5 to10 minutes. You need
to boot a new image from TFTP post the secure erase as the image gets deleted.

የፋብሪካ ዳግም ማስጀመር 2

ሰነዶች / መርጃዎች

CISCO IOS-XE Programmability and Automation Power [pdf] የተጠቃሚ መመሪያ IOS-XE Programmability and Automation Power, IOS-XE, Programmability and Automation Power, Automation Power, Power

ዋቢዎች

• የተጠቃሚ መመሪያ