VEVOR 10-inch Benchtop Drill Press Instruction Manual

1. መግቢያ

Thank you for choosing the VEVOR 10-inch Benchtop Drill Press. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: VEVOR 10-inch Benchtop Drill Press Overview

2. የደህንነት መመሪያዎች

የኃይል መሳሪያዎችን ሲጠቀሙ ሁልጊዜ ደህንነትን ቅድሚያ ይስጡ። እነዚህን መመሪያዎች አለመከተል ከባድ ጉዳት ወይም የንብረት ውድመት ሊያስከትል ይችላል።

• መመሪያውን ያንብቡ፡- ከመጠቀምዎ በፊት ሁሉንም የአሠራር ሂደቶች እና የደህንነት ማስጠንቀቂያዎች ይረዱ።
• የግል መከላከያ መሳሪያዎችን (PPE) ይልበሱ፦ Always wear safety glasses or a face shield. Hearing protection and dust masks are recommended.
• ደህንነቱ የተጠበቀ የስራ ክፍል ሁልጊዜ clamp the workpiece firmly to the worktable to prevent movement during drilling. Never hold the workpiece by hand.
• የሥራ ቦታን አጽዳ; የስራ ቦታውን ንፁህ ፣ በደንብ ብርሃን ያድርገው እና ​​ከተዝረከረከ የጸዳ ያድርጉት።
• ትኩረትን የሚከፋፍሉ ነገሮችን ያስወግዱ; Do not operate the drill press when tired, under the influence of drugs, alcohol, or medication.
• Proper Clothing: ልቅ የሆኑ ልብሶችን፣ ጓንቶችን፣ ክራባት ወይም በሚንቀሳቀሱ ክፍሎች ውስጥ ሊገቡ የሚችሉ ጌጣጌጦችን አይለብሱ። ረጅም ፀጉርን ወደ ኋላ ያያይዙ።
• የኤሌክትሪክ ደህንነት; የኃይል አቅርቦቱ ከመሳሪያው መስፈርቶች ጋር የሚስማማ መሆኑን ያረጋግጡ። በ d ውስጥ አይሰሩamp ወይም እርጥብ ሁኔታዎች.
• ከማስተካከያዎች በፊት ገመዱን ያላቅቁ፦ Always disconnect the power before changing accessories, making adjustments, or performing maintenance.
• ትክክለኛውን ፍጥነት ይጠቀሙ; Select the appropriate drilling speed for the material and drill bit size.
• የጥገና መሳሪያ; ለተሻለ እና ደህንነቱ የተጠበቀ አፈፃፀም መሳሪያዎችን በሹል እና ንጹህ ያቆዩ።

3. የምርት ክፍሎች

Familiarize yourself with the main parts of your VEVOR Benchtop Drill Press.

Figure 2: Key Components of the Drill Press

• 5-Speed Adjustable Pulley System: Allows for variable speed settings.
• 6.2A Motor: Powerful induction motor for consistent performance.
• Secure & Waterproof Switch: Main power switch with safety features.
• 1/2 Inch Chuck: Holds various drill bit sizes securely.
• Φ1.89" Thickened Column: Provides stability and rigidity.
• Steel Plate Worktable & Base: Durable and stable platform for workpieces.

4. ማዋቀር

Follow these steps to assemble your drill press.

1. ማሸግ፡ Carefully remove all components from the packaging. Verify all parts are present against the packing list.
2. የመሠረት እና የአምድ ስብስብ፡ Attach the column to the base using the provided fasteners. Ensure it is securely tightened.
3. ዋና ጉባኤ፡- Mount the drill press head onto the top of the column. Secure it in place with the appropriate screws or clamps.
4. የስራ ጠረጴዛ መጫኛ; Slide the worktable assembly onto the column. Adjust its height and secure it using the locking handle.
5. የመጫን አያያዝ; Attach the feed handles to the spindle quill.
6. የቻክ መጫኛ; Insert the chuck onto the spindle. Ensure it is seated firmly.
7. የኃይል ግንኙነት; የኤሌክትሪክ ገመዱን ወደ ተስማሚ የኤሌክትሪክ ማሰራጫ ያገናኙ.

For visual guidance on assembly, refer to the following video demonstrating a similar drill press setup process.

No specific assembly video for this model is available from the seller. Please refer to the written instructions and diagrams.

5. የአሠራር መመሪያዎች

5.1 ማብራት / ማጥፋት

To turn on the drill press, press the green 'ON' button. To turn it off, press the red 'OFF' button. The switch is designed to be secure and waterproof.

5.2 የፍጥነት ማስተካከያ

The VEVOR drill press features a variable 5-speed control system, allowing speeds from 610 to 2800 RPM. To adjust the speed, open the top cover and reposition the drive belt on the pulleys according to the desired RPM. A diagram inside the cover typically indicates the belt configurations for different speeds.

Figure 3: Adjusting Belt for Speed Control

5.3 ጥልቅ ማስተካከያ

Set precise drilling depths using the adjustable depth stop. This feature ensures consistent hole depths, which is crucial for repetitive tasks. The spindle travel is 2 inches.

Figure 4: Setting the Adjustable Depth Stop

5.4 Worktable Adjustment

The thick metal worktable can be adjusted in height and tilted up to 45 degrees left or right. Loosen the locking mechanism, adjust the table to the desired position, and then securely tighten the lock.

Figure 5: Adjusting and Tilting the Worktable

5.5 LED Lighting & X-Ray Positioning

An integrated LED work light illuminates your work area for clear visibility, even in low-light conditions. The X-ray positioning system assists in accurately locating drilling spots for precision work.

Figure 6: Using LED Light and X-Ray Positioning

5.6 የቻክ ኦፕሬሽን

The 1/2-inch chuck securely holds various drill bits. To insert or remove a drill bit, use the chuck key to loosen or tighten the jaws. Ensure the bit is centered and firmly secured before operation to prevent slippage and ensure precision.

Figure 7: Chuck and Drilling Diameter

6. ጥገና

መደበኛ ጥገና የጭስ ማውጫዎ ረጅም ጊዜ የሚቆይ እና ጥሩ አፈፃፀምን ያረጋግጣል።

• ማጽዳት፡ Keep the machine clean and free of dust and debris. Use a brush or vacuum to remove sawdust.
• ቅባት፡ Periodically lubricate moving parts, such as the column and quill, with light machine oil.
• ቀበቶ ምርመራ; Check the drive belt for wear, cracks, or tension. Replace if necessary and ensure proper tension for optimal speed transfer.
• የቻክ ጥገና; Keep the chuck jaws clean and free of rust. Apply a small amount of lubricant if they become stiff.
• ማያያዣ ቼክ፡ ሁሉንም ፍሬዎች፣ ብሎኖች እና ዊንጮችን በየጊዜው ይመርምሩ። ማንኛውንም የተላቀቁ ማያያዣዎችን ያጥብቁ።
• የኃይል ገመድ ምርመራ; Check the power cord for any damage. Do not use the tool if the cord is frayed or damaged.

7. መላ መፈለግ

ይህ ክፍል በመሳሪያዎ ላይ ሊያጋጥሙዎት የሚችሉ የተለመዱ ችግሮችን ያብራራል።

እዚህ ያልተዘረዘሩ ችግሮች ካጋጠሙዎት ወይም መፍትሄዎች ችግሩን ካልፈቱት፣ እባክዎን የVEVOR የደንበኞች ድጋፍን ያነጋግሩ።

8. ዝርዝሮች

ምስል 8: የምርት ልኬቶች እና ቁልፍ ዝርዝሮች

9. ዋስትና እና ድጋፍ

የዋስትና መረጃ፣ የቴክኒክ ድጋፍ ወይም የአገልግሎት ጥያቄዎች ካሉዎት፣ እባክዎን ከምርትዎ ጋር የተካተተውን የዋስትና ካርድ ይመልከቱ ወይም ኦፊሴላዊውን VEVOR ይጎብኙ webጣቢያ. የግዢ ደረሰኝህን እንደ ግዢ ማረጋገጫ አቆይ።

የደንበኛ ድጋፍ፡ For assistance, please contact VEVOR customer service through their official channels. Details can typically be found on the product packaging or the VEVOR brand webጣቢያ.