UB06RB UB-C Controller
Specifications:
- Model: UB06RB
- Battery Power: 3.7V 400mA
- Lumen: 2W 130lm max
- Color: White 3000K / 4000K / 6000K + RGB
- Beam Angle: Type-C
- DIM: >80 Ra
- USB Charging: Yes
- CRI: 30000 hours
Product Usage Instructions:
Installation:
WARNING! To prevent combustion or explosion,
follow these steps:
- Identify the fixtures by letters A, B, C, D, E, F.
- Slide the remote control button to the same letter to control
that group of lights simultaneously. - Attach the lamps directly to a ferrous surface or paste 1 iron
sheet for nonferrous surfaces. - Ensure the installation surface is clean and flat.
- Tear off the sticker on the back of the iron sheets and install
the light where needed.
Storage and Disposal:
Storage: After damp or soiling storage, have
the product checked by an approved electrician before
installation.
Disposal: Follow local regulations for disposal
of electronic products.
Frequently Asked Questions (FAQ):
How do I control multiple fixtures simultaneously?
To control multiple fixtures at the same time, slide the remote
control button to the same letter corresponding to the group of
lights you want to control.
How do I extend my warranty and get a replacement?
To extend your warranty for 1 year and get a replacement, scan
the QR codes provided in the manual and follow the instructions.
Contact support@alussolighting.com with details of the defective
item for replacement warranty.
Where can I get further assistance or support?
For any help or suggestions, feel free to contact Alusso
Lighting through their Alusso APP, email
support@alussolighting.com, or visit their website
www.alussolighting.store/pages/contact.
Dimensions & Accessories
Operation Guide
UB06 Series
Instruction Manual
85.6mm
A
USB cable *1
Iron Sheet with Double Sided Adhensive *3
B
C
20S 1MIN 5MIN ,
/
M
D
RGB
E
F
Specifications
Model Battery Power Lumen Color Color Temp. Beam Angle DIM USB Charging CRI Lifespan
UB06RB 3. 7 V 40 0 mA
2W 130lm max
White 300 0 K /4 0 0 0 K /6 0 0 0 K + RGB
110° Dimmable
Type-C >8 0 Ra 30000 hours
Installation
WARNING!
· DO NOT soak the light in water or short-circuit it. · STOP USING if it is severely swollen or water-soaked. · DO NOT place the product into fire, open flame or hot surface as it may cause
combustion or explosion.
1
2
3
Letter A B C
D
E
Name
Time Button
· 20S/1MIN/5MIN-Choose the duration time you want. Only work in AUTO Mode
CCT/Brightness Button
· Short press to switch the color temperature of 3000K/4000K/6000K. · Long press for stepless dimming (10%-100%).
PIR Motion Sensor
Mode Button
· Short press to choose the mode you want OFF- Turn off the light. ON-The light will always stay on. AUTO (Day) mode- Automatically lights up in both daytime and dark environment, automatically turns off after about 20S/1min/5min if no motions detected (use remote controller to choose the mode and set the duration time). AUTO (Night) mode- Only automatically lights up in the dark environment, automatically turns off after about 20S/1min/5min if no motion is detected (use remote controller to set the duration time).
RGB Button
· 7 colors light constitutes 9 lighting mode: Short Press the button to choose light color, the sequence is RED-YELLOW-LIGHT GREEN-GREEN-CYAN -BLUE-PURPLE-7 COLOR BREATHING GRADIENT-7 COLOR FLASHING
Group Control
Slide to the same letter means the fixtures are made in the same group. Slide remote control button to the same letter, for example A, then you are able to control that group of lights at the same time.
OFFA B C
Ferrous surface
C
Attach the lamps directly to the ferrous surface.
It can be installed on the nonferrous surface by pasting 1 iron sheet
Ensure the installation surface is clean and flat, then tear off the sticker on the back of the iron sheets and install the light where needed.
STORAGE AND DISPOSAL Storage
· The product must be stored in a dry and clean environment. Do not strain the product mechanically during storage.
! After a damp or soiling storage the product may only be installed After checking its condition by an approved electrician.
Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible manner. · Do not dispose of electrical and electronic equipment as domestic waste.
Manufactured by:
NINGBO SILIANG LIGHTING TECHNOLOGY CO.,LTD #138,South RD.of Jishi,Haishu,Ningbo,315171,China
mm Made in China
Warranty
Scan the QR codes and be our member, You’ll get:
1. Get 30% OFF for first order Message us the keywordcode and get your special discount!
2. Extend warranty for 1 year Replacement warranty is promised during the warranty period. Please contact support@alussolighting.com to apply for Replacement Warranty, and the informatio below is required:
Email subject: Replacement Warranty Details of Defective item:Purchase platform + order number + product photos (incl. lamp printing)
In case of any help or suggestion, please feel free to contact us
Alusso APP Email: support@alussolighting.com
A+ Family
Facebook Web: www.alussolighting.store/pages/contact
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receivingantenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for
help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure require ment. The device can be used in portable exposure condition, compliance with exposure requirements.
Documents / Resources
 |
alusso UB06RB UB-C Controller [pdf] Instruction Manual 2BQUH-UB-C, UB06RB UB-C Controller, UB06RB, UB-C Controller, Controller |