Altronix TROVE2 Mercury Lenel Access and Power Integration
Specifications
- Enclosure Options: TROVE2
- Dimensions: 27.25 H x 21.75 W x 6.5 D
Product Information
The Altronix products allow for easy integration of power supplies and accessories with access controllers from top manufacturers, reducing installation and labor costs.
Product Usage Instructions
Power Supply/Chargers for TROVE Series:
Choose the appropriate Altronix model based on your power requirements:
- AL400ULXB2: 12VDC @ 4A or 24VDC @ 3A, 1 output, built-in battery charger
- AL600ULXB: 12VDC or 24VDC @ 6A, 1 output, built-in battery charger
- AL1012ULXB: 12VDC @ 10A, 1 output, built-in battery charger
- AL1024ULXB2: 24VDC @ 10A, 1 output, built-in battery charger
Trove 2 Series Pre-assembled Kits:
Select the appropriate kit based on your system capacity and compatible models from KERI SYSTEMS:
-
- T2KSK38: 8-Door Access System with Power
- T2KSK712: 12-Door Access System with Power
FAQ
Q: Can the TROVE2 enclosure accommodate batteries?
A: Yes, the TROVE2 enclosure can accommodate four (4) 12VDC/12AH batteries.
Q: What are the dimensions of the AL600ULXB power supply?
A: The AL600ULXB power supply has dimensions of 7.1 x 4.5 x 1.44 inches.
Easily combine Altronix power and accessories with access controllers from the industry’s leading manufacturers – Reducing installation and labor costs!
- Trove streamlines access control design and deployment, increasing profits and ROI.
- Removable backplanes allow you to configure and test prior to on-site installation.
- Trove enclosures are available in different sizes and configurations to meet your project scope – including wall mount, rack mount and outdoor models.
- Pre-configured kits are available with power distribution, finger duct and wire assemblies.
- Combine both access and intrusion modules for various brands – all in one enclosure, for added value!
- Optional LINQ™ Networked Power Management Technology allows you remotely monitor, control and report power/diagnostics, streamlining service and maintenance operations by leveraging the network.
- Altronix products are TAA & NDAA compliant
- Our free online Trove System Design tool simplifies the design and product selection process: www.altronix.com/system_design_tools/trove
- TROVE2
- Knockouts accommodate up to 2.0” conduit
- Accommodates four (4) 12VDC/12AH batteries Dimensions: 27.25” H x 21.75” W x 6.5” D
Access and Power Integration
Altronix Model |
Power Supply/Charger(s) |
Description/Sub-Assemblies |
System Capacity |
Compatible KERI SYSTEMS Models |
|
Trove 2 Series – Accommodates Altronix Power and Distribution with Controllers | |||||
TROVE2KS2 | N/A | Enclosure + Backplane | 12-Doors |
NXT-2D-MSCNE, NXT-4D-MSCNE, NXT-4X4NE, NXTW1, NXTRM3 |
|
TKS2 | N/A | Backplane only | |||
Trove 2 Series Pre-assembled Kits | |||||
T2KSK38 | AL600ULXB | ACMS8, PDS8, VR6 |
8-Doors |
||
T2KSK3F8 | eFlow6NB | ||||
T2KSK38D | AL600ULXB | ACMS8CB, PDS8CB, VR6 | |||
T2KSK3F8D | eFlow6NB | ||||
T2KSK712 | AL1024ULXB2 | ACM4, ACMS8, PDS8, VR6 |
12-Doors |
||
T2KSK7F12 | eFlow104NB | ||||
T2KSK712D | AL1024ULXB2 | ACM4, ACMS8CB, PDS8CB, VR6 | |||
T2KSK7F12D | eFlow104NB | ||||
220VAC units available upon request, add suffix “V” (T2KSK38V) |
Power Supply/Chargers for TROVE Series
Altronix Model |
Total Output Power |
Number of Outputs | Built-in Battery Charger |
Input |
Dimensions (L x W x H) | ||
ULXB Series Power Supply/Chargers | |||||||
AL400ULXB2 | 12VDC @ 4A or 24VDC @ 3A |
1 |
SLA |
115VAC |
7.1” x 4.5” x 1.44” | ||
AL600ULXB | 12VDC or 24VDC @ 6A | 7.1” x 4.5” x 2.6” | |||||
AL1012ULXB | 12VDC @ 10A | 7.5” x 4.5” x 2.25” | |||||
AL1024ULXB2 | 24VDC @ 10A | 8.4” x 4.5” x 1.95” | |||||
AL400ULXB2V | 12VDC @ 4A or 24VDC @ 3A |
220VAC |
7.1” x 4.5” x 1.44” | ||||
AL600ULXB220 | 12VDC or 24VDC @ 6A | 7.1” x 4.5” x 2.6” | |||||
AL1012ULXB220 | 12VDC @ 10A | 7.5” x 4.5” x 2.25” | |||||
AL1024ULXB2V | 24VDC @ 10A | 8.4” x 4.5” x 1.95” | |||||
eFlow Series Power Supply/Chargers | |||||||
eFlow4NB | 12VDC or 24VDC @ 4A |
1 Main Output, 1Aux. Output (1A) |
SLA |
115VAC |
7.5” x 4.6” x 1.75” | ||
eFlow6NB | 12VDC or 24VDC @ 6A | 7.5” x 4.6” x 1.75” | |||||
eFlow102NB | 12VDC @ 10A | 7.5” x 4.6” x 1.75” | |||||
eFlow104NB | 24VDC @ 10A | 8.25” x 4.56” x 1.75” | |||||
eFlow4NBV | 12VDC or 24VDC @ 4A |
220VC |
7.5” x 4.6” x 1.75” | ||||
eFlow6NBV | 12VDC or 24VDC @ 6A | 7.5” x 4.6” x 1.75” | |||||
eFlow102NBV | 12VDC @ 10A | 7.5” x 4.6” x 1.75” | |||||
eFlow104NBV | 24VDC @ 10A | 8.25” x 4.56” x 1.75” | |||||
Tango PoE Driven Power Supply/Charger | |||||||
Tango1B | 12VDC up to 6.25A (75W) and 24VDC up to 3A (75W) | 2 | LiFePO4 | 90W 802.3bt PoE | 7.625” x 4.125” x 1.25” |
PoE Power Sourcing Equipment
PoE Power Sourcing Equipment | |
Altronix Model | Description |
NetWay1BT | Single Port 802.3bt Converter/Injector – 115/230VAC Input, 90W Output |
NetWay8BT | 8-Port Managed 802.3bt Midspan Injector supplies 90W per port (480W total power) |
Altronix Model |
Description |
Number of Outputs |
Dimensions |
||
ACM4 / ACM4CB | 4-Output Access Power Controller | 4 | 5.175” x 3.36” x 1.25” | ||
ACM8 / ACM8CB | 8-Output Access Power Controller | 8 | 8” x 4.5” 1.25” | ||
ACMS8 / ACMS8CB | Dual Input, 8-Output Access Power Controller | 8 | 8” x 4.5” 1.25” | ||
ACMS8K1 / ACMS8CBK1 | Dual Input, 8-Output Access Power Controller and Voltage Regulator Kit | 8 | 8” x 4.5” 2.125” | ||
ACMS12 / ACMS12CB | Dual Input, 12-Output Access Power Controller | 12 | 8” x 4.5” 1.25” | ||
NETWAY5A | 5-Port Switch Board Facilitates Network Drops (10/100) | 5 | 5.625” x 3.5” x 1” | ||
NETWAY5B | 5-Port Switch Board Facilitates Network Drops (10/100/100) | 5 | 5.625” x 3.5” x 1” | ||
PD4UL / PD4ULCB | 4-Output Power Distribution Module | 4 | 5.21” x 3.25” x 1” | ||
PD8UL / PD8ULCB | 8-Output Power Distribution Module | 8 | 5.21” x 3.25” x 1” | ||
PDS8 / PDS8CB | Dual Input, 8-Output Power Distribution Module | 8 | 5.375” x 3” x 1” | ||
PDS8K1 / PDS8CBK1 | Dual Input, 8-Output Power Distribution Module and Voltage Regulator Kit | 8 | 5.375” x 3” x 2” | ||
PD16W / PD16WCB | 16-Output Power Distribution Module | 16 | 5.875” x 6” x 0.95” | ||
PDS16 / PDS16CB | Dual Input, 16-Output Power Distribution Module | 16 | 5.375” x 3” x 1” | ||
M0M5 | 5-Output Power Distribution Module with Fire Alarm Interface | 5 | 5.25” x 3.5” x 1” | ||
LINQ8PD / LINQ8PDCB | Dual Input, 8-Output Network Power Distribution Module
– Control, Monitor and report Power/Diagnostics |
8 | 8”x 4.5”x 1.25” | ||
LINQ8ACM / LINQ8ACMCB | Dual Input, 8-Output Network Power Access Power Controller
– Control, Monitor and report Power/Diagnostics |
8 | 8” x 4.5” 1.25” | ||
LPD | Low Power Disconnect Module (12/24VDC input) | N/A | 2” x 2.75” 1” | ||
VR6 | Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 6A | 1 | 5.375” x 3” x 1” | ||
VR10 | Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 10A | 1 | 5.375” x 3” x 1” |
Power Distribution / Sub Assemblies for TROVE Series
Altronix Model | Description | ||
BL3 | 18” Battery Leads (black and red) | ![]() ![]()
|
|
BL4 | 8” Battery Series Jumper (yellow) | ||
BL6 | 68” Battery Leads (black and red) | ||
BR1 | Add-on mounting bracket. Mount additional Altronix sub-assemblies to the enclosure’s side wall. | ||
BT126 | 12VDC / 7AH Rechargeable Battery | ||
BT1212 | 12VDC / 12AH Rechargeable Battery | ||
BTL125 | Rechargeable 12V Lithium Iron Phosphate (LiFePO4) Battery | ||
CLK1 | Thumb Lock. Fits Trove1, Trove2 and Trove3 enclosures. | ||
DNP1 |
Altronix DIN Rail Adapter Plate accommodates the following sub-assemblies: ACM4(CB, ACM8(CB), ACM8(CB), ACMS8(CB), ACMS12(CB), LINQ8PD(CB), LINQ8ACM(CB), MOM5, NETWAY5A, NETWAY5B, NETWAY5P, NETWAY5PQ, PD4UL(CB), PD8UL(CB), PDS8(CB), PDS16(CB) | ||
GB1 | Altronix Adapter Plate for Genetec Synergis Cloud Link (For Mercury and HID/Vertx) | ||
MM4 | Mounting Magnets. 26 lbs. holding force. Pack of 4. | ||
MM8 | Mounting Magnets. 26 lbs. holding force. Pack of 8. | ||
MM12 | Mounting Magnets. 26 lbs. holding force. Pack of 12. | ||
MM24 | Mounting Magnets. 26 lbs. holding force. Pack of 24. | ||
PSC1 | Power Supply Protective Cover (Includes standoffs) | ||
RSB1 | Rocker Switch with Bracket – Includes single Master Power ON/OFF Switches and Wires | ||
RSB2 | Rocker Switches with Bracket – Includes two (2) Master Power ON/OFF Switches and Wires | ||
SPACER1 | 5/8” Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 25. | ||
SPACER3 | 5/8” Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 25. | ||
SPACER4 | 5/8” Nylon male/female spacers (standoffs) with 6/32 screws. Pack of 25. | ||
SPACER5 | 5/8” Nylon snap-on spacers (standoffs) with 6/32 screws. Pack of 32. | ||
SPACER6 | 1” Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 4. | ||
SPACER7 | 5/8” Aluminum male/female spacers (standoffs) with 6/32 screws. Pack of 25. | ||
SPACER8 | 1” Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 4. | ||
SPACER9 | 5/8” Aluminum spacers (standoffs) with 4/40 screws. Pack of 8. | ||
TROVE2BWC | Wire trough/Battery enclosure compliments Trove2 enclosures
to accommodate up to four (4) 12VDC/18AH batteries, or conceal side wiring (horizontal mount) |
||
TROVE3BWC | Wire trough/Battery enclosure compliments Trove3 enclosures
to accommodate up to four (4) 12VDC/18AH batteries, or conceal wiring (horizontal mount) |
||
TROVE3SWC | Wire trough/Battery enclosure compliments Trove3 enclosures
to accommodate up to four (4) 12VDC/40AH batteries, or conceal side wiring (vertical mount) |
||
WM5 | Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 5. | ||
WM10 | Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 10. | ||
WM25 | Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 25. | ||
WM100 | Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 100. |
140 58th Street | Brooklyn, NY 11220 | 718.567.8181 | info@altronix.com
Documents / Resources
![]() |
Altronix TROVE2 Mercury Lenel Access and Power Integration [pdf] Owner's Manual TROVE2, TROVE2KS2, T2KSK38, T2KSK3F8, T2KSK38D, T2KSK3F8D, AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, AL400ULXB2V, AL600ULXB220, AL1012ULXB220, AL1024ULXB2V, TROVE2 Mercury Lenel Access and Power Integration, TROVE2, Mercury Lenel Access and Power Integration, Lenel Access and Power Integration, Access and Power Integration, and Power Integration, Power Integration, Integration |
![]() |
Altronix TROVE2 Mercury Lenel Access and Power Integration [pdf] Owner's Manual TROVE2, TBH2, TBHD2, AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, AL400ULXB2V, AL600ULXB220, AL1012ULXB220, AL1024ULXB2V, eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, eFlow4NBV, eFlow6NBV, eFlow102NBV, eFlow104NBV, TROVE2 Mercury Lenel Access and Power Integration, TROVE2, Mercury Lenel Access and Power Integration, Lenel Access and Power Integration, Access and Power Integration, Power Integration, Integration |