Altronix-LOGO

Altronix TROVE1AA1 4 Door Access and Power Integration

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration-PRO

Product Information

Specifications:

  • Enclosure Options:
    • TROVE1: Knockouts accommodate up to 1.5 conduit – Accommodates two (2) 12VDC/7AH batteries Dimensions: 18 H x 14.5 W x 4.625 D
    • TROVE2: Knockouts accommodate up to 2.0 conduit – Accommodates four (4) 12VDC/12AH batteries Dimensions: 27.25 H x 21.75 W x 6.5 D

Product Usage Instructions

Access and Power Integration:
Combine Altronix power and accessories with access controllers for efficient deployment.

Trove 1 Series:

  • Altronix Model: TROVE1AA1
  • Power Supply/Charger(s): N/A
  • Description/Sub-Assemblies: Enclosure + Backplane
  • System Capacity: Varies based on the kit
  • Compatible Azure Models: ACM4, VR6, PDS8, BLU-IC2, BLU-IC4, BLU-IO168, RI2M

Trove 2 Series:

  • Altronix Model: TROVE2AA2
  • Power Supply/Charger(s): N/A
  • Description/Sub-Assemblies: Enclosure + Backplane
  • System Capacity: Varies based on the kit
  • Compatible Azure Models: ACMS8, VR6, PDS8, BLU-IC2, BLU-IC4, BLU-IO168, RI2M

FAQ:

  • Q: Can I request 220VAC units for the pre-assembled kits?
    A: Yes, you can request 220VAC units by adding the suffix V to the kit model.
  • Q: What are the system capacities of the Trove 1 and Trove 2 Series?
    A: The system capacities vary based on the specific kit configuration. Refer to the provided compatibility list for details.
  • Q: Are wire magnets included for wire management in the kits?
    A: Yes, wire magnets are included in some models for efficient wire management.

Product Introduction

Easily combine Altronix power and accessories with access controllers from the industry’s leading manufacturers – Reducing installation and labor costs!

  • Trove streamlines access control design and deployment, increasing profits and ROI.
  • Removable backplanes allow you to configure and test prior to on-site installation.
  • Trove enclosures are available in different sizes and configurations to meet your project scope – including wall mount, rack mount and outdoor models.
  • Pre-configured kits are available with power distribution, finger duct and wire assemblies.
  • Combine both access and intrusion modules for various brands – all in one enclosure, for added value!
  • Optional LINQ™ Networked Power Management Technology allows you remotely monitor, control and report power/diagnostics, streamlining service and maintenance operations by leveraging the network.
  • Altronix products are TAA & NDAA compliant
  • Our free online Trove System Design tool simplifies the design and product selection process: www.altronix.com/system_design_tools/trove

Enclosure Options

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (1)

  • TROVE1
    • Knockouts accommodate up to 1.5” conduit
    • Accommodates two (2) 12VDC/7AH batteries Dimensions: 18” H x 14.5” W x 4.625” D
  • TROVE2
    • Knockouts accommodate up to 2.0” conduit
    • Accommodates four (4) 12VDC/12AH batteries Dimensions: 27.25” H x 21.75” W x 6.5” D

Access and Power Integration

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (2)

Altronix Model Power Supply/Charger(s) Description/Sub-Assemblies System Capacity Compatible Azure Models
Trove 1 Series – Accommodates Altronix Distribution with Controllers
TROVE1AA1 N/A Enclosure + Backplane 4-Doors BLU-IC2, BLU-IC4, BLU-IO168, RI2M
TAA1 N/A Backplane only
Trove 1 Series Pre-assembled Kits
T1AAK34S AL600ULXB ACM4, VR6, PDS8 4-Doors
T1AAK3F4S eFlow6NB
T1AAK34SD AL600ULXB ACM4CB, VR6, PDS8CB
T1AAK3F4SD eFlow6NB
220VAC units available upon request, add suffix “V” (T1AAK14SV)

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (3)

Altronix Model Power Supply/Charger(s) Description/Sub-Assemblies System Capacity Compatible Azure Models
Trove 2 Series – Accommodates Altronix Distribution with Controllers
TROVE2AA2 N/A Enclosure + Backplane 8-Doors BLU-IC2, BLU-IC4, BLU-IO168, RI2M
TAA2 N/A Backplane only
Trove 2 Series Pre-assembled Kits
T2AAK78S AL1024ULXB2 ACMS8, VR6, PDS8 8-Doors
T2AAK7F8S eFlow104NB
T2AAK78SD AL1024ULXB2 ACMS8CB, VR6, PDS8CB
T2AAK7F8SD eFlow104NB
220VAC units available upon request, add suffix “V” (T2AAK7FSV)

Pre-wired

Access and Power Integration Kits

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (4)

Altronix Model Description System Capacity Compatible Azure Models
Trove1 Series Includes Power Distribution, Wire Assemblies for Controllers and Wire Magnets for Management
Fuse Protected Models
T1AA3CK1 Trove1AA1 with eFlow6NB, ACM4, VR6, PDS8, RSB1 4-Doors 1- BLU-IC4
T1AA3CK2 Trove1AA1 with eFlow6NB, ACM4, VR6, PDS8, RSB1 4-Doors 1- BLU-IC2, 1 – RI2M
T1AA3CK3 Trove1AA1 with eFlow6NB, ACM4, VR6, PDS8, RSB1 4-Doors 2 – RI2M
PTC Protected Models
T1AA3CK1D Trove1AA1 with eFlow6NB, ACM4CB, VR6, PDS8, RSB1 4-Doors 1- BLU-IC4
T1AA3CK2D Trove1AA1 with eFlow6NB, ACM4CB, VR6, PDS8, RSB1 4-Doors 1- BLU-IC2, 1 – RI2M
T1AA3CK3D Trove1AA1 with eFlow6NB, ACM4CB, VR6, PDS8, RSB1 4-Doors 2 – RI2M
220VAC units available upon request, add suffix “V” (T1AA3CK2V)

Rack Access and Power Integration Kits

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (5)

Altronix Model Description System Capacity Compatible Azure Models
Trove1R Series Includes Power Distribution, Wire Assemblies for Controllers and Wire Magnets for Management
Fuse Protected Models
T1RAA3CK1 Trove1AA1R with eFlow6NB, ACM4, VR6, PDS8, RSB1 4-Doors 1- BLU-IC4
T1RAA3CK2 Trove1AA1R with eFlow6NB, ACM4, VR6, PDS8, RSB1 4-Doors 1- BLU-IC2, 1 – RI2M
T1RAA3CK3 Trove1AA1R with eFlow6NB, ACM4, VR6, PDS8, RSB1 4-Doors 2 – RI2M
PTC Protected Models
T1RAA3CK1D Trove1AA1R with eFlow6NB, ACM4CB, VR6, PDS8, RSB1 4-Doors 1- BLU-IC4
T1RAA3CK2D Trove1AA1R with eFlow6NB, ACM4CB, VR6, PDS8, RSB1 4-Doors 1- BLU-IC2, 1 – RI2M
T1RAA3CK3D Trove1AA1R with eFlow6NB, ACM4CB, VR6, PDS8, RSB1 4-Doors 2 – RI2M
220VAC units available upon request, add suffix “V” (T1RAA3CK2V)

Power Supply/Chargers for TROVE Series

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (6)

Altronix Model Total Output Power Number of Outputs Built-in Battery Charger Input Dimensions (L x W x H)
ULXB Series Power Supply/Chargers
AL400ULXB2 12VDC @ 4A or 24VDC @ 3A 1 SLA 115VAC 7.1” x 4.5” x 1.44”
AL600ULXB 12VDC or 24VDC @ 6A 7.1” x 4.5” x 2.6”
AL1012ULXB 12VDC @ 10A 7.5” x 4.5” x 2.25”
AL1024ULXB2 24VDC @ 10A 8.4” x 4.5” x 1.95”
AL400ULXB2V 12VDC @ 4A or 24VDC @ 3A 220VAC 7.1” x 4.5” x 1.44”
AL600ULXB220 12VDC or 24VDC @ 6A 7.1” x 4.5” x 2.6”
AL1012ULXB220 12VDC @ 10A 7.5” x 4.5” x 2.25”
AL1024ULXB2V 24VDC @ 10A 8.4” x 4.5” x 1.95”
eFlow Series Power Supply/Chargers
eFlow4NB 12VDC or 24VDC @ 4A 1 Main Output, 1Aux. Output (1A) SLA 115VAC 7.5” x 4.6” x 1.75”
eFlow6NB 12VDC or 24VDC @ 6A 7.5” x 4.6” x 1.75”
eFlow102NB 12VDC @ 10A 7.5” x 4.6” x 1.75”
eFlow104NB 24VDC @ 10A 8.25” x 4.56” x 1.75”
eFlow4NBV 12VDC or 24VDC @ 4A 220VC 7.5” x 4.6” x 1.75”
eFlow6NBV 12VDC or 24VDC @ 6A 7.5” x 4.6” x 1.75”
eFlow102NBV 12VDC @ 10A 7.5” x 4.6” x 1.75”
eFlow104NBV 24VDC @ 10A 8.25” x 4.56” x 1.75”
Tango PoE Driven Power Supply/Charger
Tango1B 12VDC up to 6.25A (75W) and 24VDC up to 3A (75W) 2 LiFePO4 90W 802.3bt PoE 7.625” x 4.125” x 1.25”

PoE Power Sourcing Equipment

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (7)

Altronix Model Description
NetWay1BT Single Port 802.3bt Converter/Injector – 115/230VAC Input, 90W Output
NetWay8BT 8-Port Managed 802.3bt Midspan Injector supplies 90W per port (480W total power)

Power Distribution / Sub Assemblies

Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (8)

Altronix Model Description Number of Outputs Dimensions
ACM4 / ACM4CB 4-Output Access Power Controller 4 5.175” x 3.36” x 1.25”
ACM8 / ACM8CB 8-Output Access Power Controller 8 8” x 4.5” 1.25”
ACMS8 / ACMS8CB Dual Input, 8-Output Access Power Controller 8 8” x 4.5” 1.25”
ACMS8K1 / ACMS8CBK1 Dual Input, 8-Output Access Power Controller and Voltage Regulator Kit 8 8” x 4.5” 2.125”
ACMS12 / ACMS12CB Dual Input, 12-Output Access Power Controller 12 8” x 4.5” 1.25”
LINQ8PD / LINQ8PDCB Dual Input, 8-Output Network Power Distribution Module

– Control, Monitor and report Power/Diagnostics

8 5.5” x 3.625” x 1.25”
LINQ8ACM / LINQ8ACMCB Dual Input, 8-Output Network Power Access Power Controller

– Control, Monitor and report Power/Diagnostics

8 8”x 4.5”x 1.25”
LPD Low Power Disconnect Module (12/24VDC input) N/A 2” x 2.75” 1”
M0M5 5-Output Power Distribution Module with Fire Alarm Interface 5 5.25” x 3.5” x 1”
NETWAY5A 5-Port Switch Board Facilitates Network Drops (10/100) 5 5.625” x 3.5” x 1”
NETWAY5B 5-Port Switch Board Facilitates Network Drops (10/100/100) 5 5.625” x 3.5” x 1”
NETWAY5P 5-Port Hardened PoE+ Switch Board 5 5.6” x 3.6” x 0.75”
NETWAY5PQ 5-Port Hardened Managed PoE+ Switch Board 5 5.6” x 3.6” x 0.75”
PD4UL / PD4ULCB 4-Output Power Distribution Module 4 5.21” x 3.25” x 1”
PD8UL / PD8ULCB 8-Output Power Distribution Module 8 5.21” x 3.25” x 1”
PDS8 / PDS8CB Dual Input, 8-Output Power Distribution Module 8 5.375” x 3” x 1”
PDS8K1 / PDS8CBK1 Dual Input, 8-Output Power Distribution Module and Voltage Regulator Kit 8 5.375” x 3” x 2”
PD16W / PD16WCB 16-Output Power Distribution Module 16 5.875” x 6” x 0.95”
PDS16 / PDS16CB Dual Input, 16-Output Power Distribution Module 16 5.375” x 3” x 1”
VR6 Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 6A 1 5.375” x 3” x 1”
VR10 Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 10A 1 5.375” x 3” x 1”

Optional Accessories for TROVE Series

Altronix Model Description
BL3 18” Battery Leads (black and red) Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (9) Altronix-TROVE1AA1-4-Door-Access-and-Power-Integration- (10)
BL4 8” Battery Series Jumper (yellow)
BL6 68” Battery Leads (black and red)
BR1 Add-on mounting bracket. Mount additional Altronix sub-assemblies to the enclosure’s side wall.
BT126 12VDC / 7AH Rechargeable Battery
BT1212 12VDC / 12AH Rechargeable Battery
BTL125 Rechargeable 12V Lithium Iron Phosphate (LiFePO4) Battery
CLK1 Thumb Lock. Fits Trove1, Trove2 and Trove3 enclosures.
DNP1 Altronix DIN Rail Adapter Plate accommodates the following sub-assemblies: ACM4(CB, ACM8(CB), ACM8(CB), ACMS8(CB), ACMS12(CB), LINQ8PD(CB), LINQ8ACM(CB), MOM5, NETWAY5A, NETWAY5B, NETWAY5P, NETWAY5PQ, PD4UL(CB), PD8UL(CB), PDS8(CB), PDS16(CB)
GB1 Altronix Adapter Plate for Genetec Synergis Cloud Link (For Mercury and HID/Vertx)
MM4 Mounting Magnets. 26 lbs. holding force. Pack of 4.
MM8 Mounting Magnets. 26 lbs. holding force. Pack of 8.
MM12 Mounting Magnets. 26 lbs. holding force. Pack of 12.
MM24 Mounting Magnets. 26 lbs. holding force. Pack of 24.
PSC1 Power Supply Protective Cover (Includes standoffs)
RSB1 Rocker Switch with Bracket – Includes single Master Power ON/OFF Switches and Wires
RSB2 Rocker Switches with Bracket – Includes two (2) Master Power ON/OFF Switches and Wires
SPACER1 5/8” Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER3 5/8” Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER4 5/8” Nylon male/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER5 5/8” Nylon snap-on spacers (standoffs) with 6/32 screws. Pack of 32.
SPACER6 1” Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 4.
SPACER7 5/8” Aluminum male/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER8 1” Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 4.
SPACER9 5/8” Aluminum spacers (standoffs) with 4/40 screws. Pack of 8.
TROVE2BWC Wire trough/Battery enclosure compliments Trove2 enclosures

to accommodate up to four (4) 12VDC/18AH batteries, or conceal side wiring (horizontal mount)

TROVE3BWC Wire trough/Battery enclosure compliments Trove3 enclosures

to accommodate up to four (4) 12VDC/18AH batteries, or conceal wiring (horizontal mount)

TROVE3SWC Wire trough/Battery enclosure compliments Trove3 enclosures

to accommodate up to four (4) 12VDC/40AH batteries, or conceal side wiring (vertical mount)

WM5 Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 5.
WM10 Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 10.
WM25 Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 25.
WM100 Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 100.

140 58th Street | Brooklyn, NY 11220 | 718.567.8181 | info@altronix.com

Documents / Resources

Altronix TROVE1AA1 4 Door Access and Power Integration [pdf] Owner's Manual
TROVE1AA1, TROVE2AA2, T1AAK34S, T1AAK3F4S, T1AAK34SD, T1AAK3F4SD, T2AAK78S, T2AAK7F8S, T2AAK78SD, T2AAK7F8SD, T1AA3CK1, T1AA3CK2, T1AA3CK3, TROVE1AA1 4 Door Access and Power Integration, TROVE1AA1, 4 Door Access and Power Integration, Access and Power Integration, Power Integration, Integration

References

Leave a comment

Your email address will not be published. Required fields are marked *