alphacool logoAlphacool
Core Geforce RTX 4090
with Backplate
alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design

Safety instructions

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - qr codehttps://www.alphacool.com/m/safety.pdf

Digital guide

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - qr code2https://www.alphacool.com/m/?acg=1005

Accessories

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - Accessories

Ceck compatibility and prepare graphics card

Ceck compatibility

Before starting the cooler assembly, compare your card with the pictures in our configurator.
To do so, visit https://www.hwconfig.com and search for your graphics card or cooler model.
For a definitiv identification, you can also compare the PCB number. The cooler was designed for a special PCB layout. Occasionally, graphics card manufacturers may revise the design of their card slightly, causing the cooler not to fit on later models. During assembly, please make sure taller parts have enough space around them and that the cooler does not damage your graphics card.

Alphacool International GmbH is not liable for assembly errors occurring due to negligence, such as selecting an incompatible cooler.
Prepare graphics card
Put the hardware on an antistatic mat. Begin dismantling the original cooler. Depending on the structure of the cooler, remove the screws at the back of the card and carefully unhook the fan connector first. If the original cooler uses thermal glue, extreme care should be taken as you can easily damage parts. Pick up all the items carefully. Next, clean the hardware of thermal paste or pad residues with a solvent (e.g. isopropanol alcohol).

Dismantle the backplate with the screwdriver

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - screwdriver

Remove spacers

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - Remove spacersPlace thermal pads on cooling block

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - thermal

Apply Thermal grease

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - grease

Install PCB

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - Install PCB

Place thermal pads on PCB backside

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - backside

Mount PCI bracket and backplate

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - Mount

Connect ARGB lighting

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - lightingScrew in screw plugs with the tool

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design - tool

Need help?

alphacool logoAlphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com

Documents / Resources

alphacool RTX 4090 GPU water cooler RTX 4090 Reference Design [pdf] Instruction Manual
RTX 4090 GPU water cooler RTX 4090 Reference Design, RTX 4090 GPU, water cooler RTX 4090 Reference Design, RTX 4090 Reference Design, Reference Design, Design

References

Leave a comment

Your email address will not be published. Required fields are marked *