alphaCOOL 10266 Core GPU Cooler Instruction Manual

alphaCOOL 10266 Core GPU Cooler

INFO

Accessories

Check compatibility and prepare the graphics card

Check compatibility

Before starting the cooler assembly, compare your card with the pictures in our configurator. To do so, visit https://gpu.alphacool.com and search for your graphics card or cooler model. For a definitiv identification, you can also compare the PCB number. The cooler was designed for a special PCB layout. Occasionally, graphics card manufacturers may revise the design of their card slightly, causing the cooler not to fit on later models. During assembly, please make sure taller parts have enough space around them and that the cooler does not damage your graphics card. Alphacool International GmbH is not liable for assembly errors occurring due to negligence, such as selecting an incompatible cooler.

Prepare graphics card

Put the hardware on an antistatic mat. Begin dismantling the original cooler. Depending on the structure of the cooler, remove the screws at the back of the card and carefully unhook the fan connector first. If the original cooler uses thermal glue, extreme care should be taken as you can easily damage parts. Pick up all the items carefully. Next, clean the hardware of thermal paste or pad residues with a solvent (e.g. isopropanol alcohol).

Remove transport spacer

Place thermal pads on cooling block

Apply Thermal Grease

Install PCB

Place the thermal pads on the PCB backside

Install IO-Shield and mount backplate

• Use original screws for the IO shield.

Connect ARGB lighting

Screw in screw plugs with the tool

Need help?

CONTACT

• Alphacool International GmbH
• Marienberger Str. 1
• D-38122 Braunschweig
• Germany
• Support: +49 (0) 531 28874-0
• Fax: +49 (0) 531 28874 – 22
• E-Mail: info@alphacool.com
• https://www.alphacool.com

FAQ

• Q: What should I do if I encounter compatibility issues?
  • A: If you encounter compatibility issues, please reach out to Alphacool International GmbH for assistance at the provided contact details.