ALPEN OPTICS AP-800 LED Rechargeable Tek-Light

Parts

1. Power button
2. Flashlight (White)
3. Floodlight (White/Red)
4. Charging Port/Magnetic Base
5. Battery Cap
6. Rechargeable Li-ion 3.7V Battery (16340)
7. USB Charging Cable w/Magnetic Head
8. Body Clip
9. Headband

Charging the Rechargeable Tek-Light

• The Tek-Light uses a magnetic charging head to recharge the included battery.
• To recharge the battery, plug the USB charging cable into a power source and attach the magnetic head to the magnetic base of the Trek-Light.
• The indicator displays blue when connected to a power source, turns red when charging, and back to blue when fully charged. Max charging time is about 2 hours.
• It is recommended to regularly charge the Tek-Light after months of storage to maintain optimal battery performance.

Battery Replacement
Unscrew the battery cap, remove battery, insert the new battery with the anode side (+) towards the inner side, then screw the battery cap back on. It is recommended to use a coaxial rechargeable Li-ion 16340 3.7V battery. Battery Bottom Side (-) NOTE: If non-coaxial battery is used, the included charger will not charge the battery and will need to be charge
per battery manufacturer’s guidelines.

WARNING: Avoid charging non-rechargeable batteries.

Output Selection

With the Trek-Light switched off, press the Power button to turn on and cycle through each light mode, 1-6.

Flashlight Modes

Floodlight Modes

Flashlight SOS White

Floodlight SOS Red

Specifications

Warranty

Limited 1 Year Warranty once registered within 60 days of purchase from Explore Scientific, LLC.
Visit explorescientificusa.com/productregistration or scan the QR code to register your product online and familiarize yourself with the applicable warranty coverage.

 

Documents / Resources

ALPEN OPTICS AP-800 LED Rechargeable Tek-Light [pdf] User Manual AP-800 LED Rechargeable Tek-Light, AP-800, LED Rechargeable Tek-Light

References

• User Manual