Allflex AWR250 Reader User Guide

Allflex AWR250 Reader

Product Usage Instructions

What is in the Box

Allflex CONNECT

• Introducing Allflex Connect – a universal mobile APP to connect your EID readers with an on-farm management platform, external identification systems, and the Allflex cloud.
• With Allflex Connect, you can create and edit customized animal cards and lists, share records with your herd management system, upload data to the cloud for actionable insights, connect your reader to your mobile via Bluetooth, and keep your readers up to date with regular firmware updates.
• Downloading the App and pairing it with your reader before first use is recommended.
• To download, please visit Google Play or the Apple Store.

Getting Started

Battery Charge

• The device should be fully charged before the first use
• To charge, use the provided Magnetic-USB power source
• Connecting the USB cable: The magnetized connectors “find” the proper orientation almost automatically by attracting each other in the appropriate order
• Note: DO NOT FORCE a connection to the reader. If it does not insert smoothly, verify that it is correctly oriented. 

Charging is complete if no bars are flashing anymore

To disconnect, pull the connector away from the device
When charged, the battery info will show the percentage of the battery as well as a rough estimation of operating time

Initial Configuration

Set Language

• The default display language will be English at first start-up. You can change the language by accessing
• Menu>>Setup>>Display>>Set Language. Navigating the options, you can then select your language preference by pressing ENTER.
• Note: It is possible to upload up to 29 custom languages. Contact your local distributor for further details.

Set Read mode

• By default, the reader is set to ‘Single Read’- one scan click per animal. Choosing the ‘Continuous mode’ enables batch reading.
• Note: The ‘Auto’ setting starts a Single Read on a short press of the ENTER  key and Continuous Read mode with a long press (> one second).

Device Properties

Multi-Color Status Led
At the top of the reader, an indication of the read status of the tag

Display

Keypad

For navigation, scrolling, and character selection in input fields
NOTE: Press the down button key for >2 seconds to switch off the device

Quick Reading Steps

“While a reader is actively scanning for an EID tag, it creates an electromagnetic field. This is what determines a range and best orientation of a tag for a successful reading”

Reading EID Tags:

1. Press to Read
2. .Scan the EID tag near the field lines of the reader
3. The device’s RGB LED signal will turn on, as well as the signalization motors (sound and vibration)
   
4. The tag will be shown on the display screen when successfully read
5. A ‘No Tag’ message will appear on the screen if the reading fails

Assigning Tags

1. At the home display, press the New Group button
2. Insert Group Name using the direction keys to navigate the letters, numbers, or symbols
3. When finished, press close to exit the keyboard, and confirm the name by pressing .
4. To assign tags to the group created, enter the group and start reading.

NOTE: After 10.000 records within one group, the device will force the user to create a new group

For more information visit www.allflex.global/allflex-awr250-stick-reader/ 

This product is not intended to diagnose, treat, cure, or prevent any disease in animals.   For the diagnosis, treatment, cure, or prevention of disease in animals, you should consult your veterinarian.  The accuracy of the data collected and presented through this product is not intended to match that of medical devices or scientific measurement devices.
Copyright© 2023 Merck & Co., Inc., Rahway, NJ, USA and its affiliates.
All rights reserved. AHI-Allflex-231200015