IMPORTANT INFORMATIONS

Catalog Numbers 58UHF-TR-100-SR15US, 58UHF-TR-100-SR15EU

WARNING: Never disassemble or modify the scanner. Doing so could result in an accident such as fire or electric shock.

Features

• Global Ultra-High Frequency (UHF) RFID solution
  • 865…868 MHz EU and UK model (CE)
    902…928 MHz US and North America model (FCC)
• Tag compatibility: ISO 18000-63 (EPC global Gen2) compliant
• Sensing range up to 1.5 m (4.92 ft)
• Built-in status indicators for diagnostics
• All-in-one linear and circular antennas
• Excellent reliability in harsh environments

Typical Applications

• Asset tracking
• Data acquisition
• Product handling
• Automotive
• Food and pharmaceutical

Specifications

(1) No condensation
(2) The setting limits depend on the country or the function. This reference value can vary depending on the operating environment tag type.

Status Indicator Functionality

IMPORTANT Installation must be in accordance with local and/or national codes. Servicing energized industrial control equipment can be hazardous if not in accordance to recommended safety procedures.

Connector Pinouts

Table 1 – EtherNet/IP ⁽¹⁾

DC M12, D-coded, 4-pin Plug	Pin	Signal	Color
	1	TxData +	White/orange
	2	Recv Data +	White/green
	3	TxData –	Orange
	4	Recv Data –	Green

(1) E1 – Standard right-angle Ethernet cables point left.
E2 – Standard right-angle Ethernet cables point right.

Table 2 – Power I/O

DC M12, D-coded, 4-pin Socket	Pin	Signal	Color
	1	+24V DC	Brown
	2	Input	White
	3	0V DC	Blue
	4	Output	Black

FCC Notice (For U.S. Customers)

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions: (1) This device will not cause harmful interference; and (2) This device must accept any interference received, including interference that can cause undesired operation of the device. Changes and modifications that are not expressly approved by Rockwell Automation can void your authority to operate this equipment under Federal Communications Commissions rules.

This equipment is tested and found to comply with the limits for a Class A digital device, according to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

ATTENTION: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, can cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you must correct the interference at your own expense.

ISED Information

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity

CE Conformity

 Documentation Feedback

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.

Waste Electrical and Electronic Equipment (WEEE)

At the end of life, this equipment should be collected separately from any unsorted municipal waste.

Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.

 Connect With us.