ALIGN RM49005XT M490 TOP Multifunctional Drone
Thank you for purchasing Align products. Please read the manual carefully before installing and be sure to retain the manual for future reference. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Specifications, contents of parts and availability are subject to change, ALIGN RC is not responsible for inadvertent errors in this publications.
INTRODUCTION
Radio Control (RIC) multicopters are not toys. RIC multicopters utilize vanous high-tech components to achieve superior performance. Improper use Of this product can result in serious injury or even death. Please read this manual carefully before operating, and make sure to be conscious Of your own personal safety and the safety Of others nearby when operating all AL IGN products. Manufacturer and seller assume no liability for the operation or the use Of this product. This product is intended for use only by adults with experience flying rernote cannot be held liable over its operation or usage at legal fi “ds. After the sale Of this product we
We recommend that you seek the assistance Of ah experienced pilot before attempting to fly our products for the first time. A local expert is the best way to properly assemble, setup, and fly your model for the first time. This product requires a certain degree of skill to operate, and is an expendable item. Any damage or dissatisfaction as a result of accidents or modifications are not covered by any warranty and cannot be retumed for repair or replacement. Please contact our distributors for free technical consultation and parts at discounted rates when you experience problems during operation or maintenance.
As Align Corporation Limited has no control over the use, setup, assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability.
In addition, RIC multicopters and its components are precision electronics susceptible to interferences from external forces such as magnetic field and radio signal. Should the multicopter or any onboard photographic equipment suffers loss or crash damageas result of external magnetic or radio interferences, Align cannot be d liable as the cause is beyond our controll.
Fly only in safe areas, away from other people. Do not operate RIC aircraft indoors or within the vicinity of homes or crowds of people. RIC aircraft are prone to accidents, failures, and crashes due to a variety of reasons including: lack of maintenance, pilot error, and radio interference. Pilots are responsible for their actions and damage or injury occurring during the operation or as Of a result Of RIC aircraft models.
FORBIDDEN
LOCATE AN APPROPRIATE LOCATION
RIC aircraft can fly at high speed, thus posing a certain egree of poten danger. Choose a legal flying field consisting of fiat, smooth grouncftvithout obstacles. Do not fly near buildings, high voltage cables, or trees to ensure the safety of yourself, others, and your model. Avoid location with magnetic and radio interferences. Please choose a legal flying field. Do not fly your model in inclement weather, h as rain, wind, snow or darkness.
Do not attempt to modify the aircraft to alter its intended design. Please use only designated replacement parts
listed in the manual to ensure its design structure integrity. Operate this product within its intended design
parameters; do not overload it with excess cargo. This product is limited to personal hobby use, and pilot should be
proficient with operation of this model. Follow all local law and ordinances when operating. Do not use this product
for purposes which may violate others personal privacy, and respect other s intellectual properties. Do not use this
product for illegal purposes or beyond the bonds of common safety
Before turning on your model and transmitter, check to make sure no one_ Ise is
operating on the same frequency. Frequency interference can cause your model, o
other models to crash. The guidance provided by an experienced pilot will be
invaluable for the assembly, tuning, trimming, and actual first flight or unforeseen
danger may happen. (Recommend you to practice with experienced pilots or wi
computer-based flight simulator firstly.)
During the operation of the multicopter, the rotor will be spinning at a high rate of
speed. The blades are capable of inflicting serious bodily injury and damage to
surrounding properties. Be conscious of your actions, and careful to keep your face,
eyes, hands, and loose clothing away from the blades. Always fly the model a safe
distance from yourself and others, as well as surrounding objects.
During the operation of the multicopter, the rotor will be spinning at a high rate of
speed. The blades are capable of inflicting serious bodily injury and damage to
surrounding properties. Be conscious of your actions, and careful to keep your face,
eyes, hands, and loose clothing away from the blades. Always fly the model a safe
distance from yourself and others, as well as surrounding objects.
The M490 includes additional electronics and other equipment. The Instruction Manual
will refer to the The M490. You may purchase any additional items or spare parts
M490 body structure is already
assembled in factory. Just need to
twist off screws and adjust tube to
proper position and locked well,
and then install the canopy on the
body firmly, ensure it will not
detach during flight.
IThe G3P gimbal mounted on the TOP version is designed for specific configurations. Both
the DV and the mainboard have matching serial numbers etched onto them. Please do not
mix and match the gimbal with different serial numbered mounting brackets (chassis), as this
can result in issues such as lens misalignment after activation.
If you need to switch the gimbal between bodies, ensure that the mounting bracket on the
body is paired with the gimbal as a complete set.
DISASSEMBLY STEPS
1. Place the lens dust cover back on.
2. Rotate the lens mount counterclockwise and release the camera.
3. Replace the body protective cove.
4. Remove the camera and place it inside the handbag for protection.
PROTECTION AND STORAGE
1. If not used for an extended periodåregularly inspect the condition of the
camera and tripod and maintain cleanliness and protection.
2. Ensure the camera and tripod are clean, free from dust or dirt.
3. Avoid storing the camera and tripod in damp areas to prevent damage.
4. Place them in a dry, well-ventilated area, away from direct sunlight and
extreme temperature changes,
Documents / Resources
 |
ALIGN RM49005XT M490 TOP Multifunctional Drone [pdf] Instruction Manual G00807, RM49005XT M490 TOP Multifunctional Drone, M490 TOP Multifunctional Drone, TOP Multifunctional Drone, Multifunctional Drone |
