ALIENWARE AW3425DWM 34 Gaming Monitor
Product Usage Instructions
- Setup:
- Place the monitor on a stable and level surface.
- Connect the necessary cables (power, HDMI, etc.) to the monitor and your computer.
- Power on the monitor and computer.
- Adjusting Settings:
- Use the on-screen display (OSD) menu to adjust settings such as brightness, contrast, and color temperature.
- Customize display preferences according to your needs for optimal viewing experience.
- Cleaning and Maintenance:
- Power off the monitor before cleaning.
- Use a soft, dry cloth to gently wipe the screen and monitor casing.
- Avoid using harsh chemicals or abrasive materials that may damage the monitor’s surface.
FAQs
- Q: How do I change the input source on the monitor?
- A: To change the input source, use the OSD menu and navigate to the input source selection option. From there, choose the desired input source (e.g., HDMI, DisplayPort).
- Q: Can I mount this monitor on a wall?
- A: Yes, this monitor is VESA mount compatible. You can use a VESA-compatible wall mount to securely attach the monitor to a wall for space-saving purposes.
“`
Safety instructions
Use the following safety guidelines to protect your monitor from potential damage and to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that you have read the safety information that is shipped with your monitor.
NOTE: Before using the monitor, read the safety information that is shipped with your monitor and is printed on the product. Keep the documentation at a secure location for future reference.
WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
CAUTION: The possible long-term effect of listening to audio at high volume through the headphones (on monitor that support it) may cause damage to your hearing ability.
• Place the monitor on a solid surface and handle it carefully.
• The screen is fragile and can be damaged if dropped or hit with a sharp object.
• Ensure that your monitor is electrically rated to operate with the AC power available in your location.
• Keep the monitor at room temperature. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display.
• Connect the power cable from the monitor to a wall outlet that is near and accessible. See Connecting your monitor.
• Do not place and use the monitor on a wet surface or near water.
• Do not subject the monitor to severe vibration or high impact conditions. For example, do not place the monitor inside a car trunk.
• Unplug the monitor when it is going to be left unused for an extended period.
• To avoid electric shock, do not attempt to remove any cover or touch the inside of the monitor.
• Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.
• Certain monitors can be wall mounted using the VESA mount that is purchased separately. Ensure to use the correct VESA specifications as mentioned in the wall-mounting section of the User’s Guide.
For information on safety instructions, see the Safety, Environmental and Regulatory Information (SERI) document that is shipped with your monitor.
About your monitor
Package contents
The following table provides the list of components that are shipped with your monitor. If any component is missing, contact Dell. For more information, see Contacting Dell.
NOTE: Some components may be optional and may not ship with your monitor. Some features may not be available in certain countries.
Table 1. Monitor components and descriptions.
Product features
The Alienware AW3425DWM Gaming monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and
LED backlight. The monitor features include:
• 864.3 mm (34.0 in.) viewable area (measured diagonally).
• 3440 x 1440 resolution, with full-screen support for lower resolutions.
• VESA AdaptiveSync Display certification minimizes graphic distortions like screen tearing and stuttering for a smoother, fluid gameplay.
• Supports AMD FreeSync Premium Technology for tear-free, stutter-free, low latency gaming.
• VESA DisplayHDR 400.
• Color gamut of DCI-P3 95%.
• Tilt and height adjustment capabilities.
• Removable stand and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.
• Digital connectivity through one DisplayPort and two HDMI ports.
• The monitor is equipped with:
− One USB Type-B upstream port
− Two USB Type-A downstream ports
• Plug-and-play capability if supported by your computer.
• On-Screen Display (OSD) adjustments for ease of set up and screen optimization.
• Supports Picture by Picture (PBP), Picture in Picture (PIP), and CONSOLE MODE.
• Security-lock slot.
• Power consumption < 0.5 W in Standby Mode.
• Optimize eye comfort with a flicker-free screen and ComfortView Plus feature which minimizes blue light emission.
• The monitor uses Low Blue Light panel and is compliant with TÜV Rheinland (Hardware Solution) at factory reset or default setting. This built-in low blue light solution reduces hazardous blue light emissions by adjusting display parameters, without sacrificing true-to-life colors.
WARNING: The possible long-term effects of blue light emission from the monitor may cause damage to the eyes, which includes but is not limited to eye fatigue and digital eye strain. ComfortView Plus feature is designed to reduce the amount of blue light that is emitted from the monitor to optimize eye comfort.
Operating system compatibility
• Windows 10 and later*
*The operating system compatibility on Dell and Alienware branded monitors may vary based on factors such as:
• Specific release date when operating system versions, patches, or updates are available.
• Specific release date when Dell and Alienware branded monitor firmware, software application, or driver updates are available on the Dell Support Site.
Identifying parts and controls
Front view
Plug-and-Play
You can connect the monitor to any Plug-and-Play compatible computer. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the computer can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings as required. For more information about changing the monitor settings, see Operating the monitor.
LCD monitor quality and pixel policy
During the LCD monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Display Pixel Guidelines.
Ergonomics
CAUTION: Improper or prolonged usage of a keyboard may result in injury.
CAUTION: Viewing the monitor screen for extended periods of time may result in eye strain.
For comfort and efficiency, observe the following guidelines when setting up and using your computer workstation:
• Position your computer so that the monitor and keyboard are directly in front of you as you work. Special shelves are commercially available to help you correctly position your keyboard.
• To reduce the risk of eye strain and neck, arm, back or shoulder pain from using the monitor for long periods of time, it is recommended that you:
1. Set the distance of the screen between 20 in. to 28 in. (50 cm to 70 cm) from your eyes.
2. Blink frequently to moisten your eyes or wet your eyes with water after prolonged usage of the monitor.
3. Take regular and frequent breaks for 20 minutes every two hours.
4. Look away from your monitor and gaze at a distant object at 20 feet away for at least 20 seconds during the breaks.
5. Perform stretches to relieve tension in the neck, arms, back and shoulders during the breaks.
• Ensure that the monitor screen is at eye level or slightly lower when you are sitting in front of the monitor.
• Adjust the tilt of the monitor, its contrast, and brightness settings.
• Adjust the ambient lighting around you (such as overhead lights, desk lamps and the curtains, or blinds on nearby windows) to minimize reflections and glare on the monitor screen.
• Use a chair that provides good lower-back support.
• Keep your forearms horizontal with your wrists in a neutral, comfortable position while using the keyboard or mouse.
• Always leave space to rest your hands while using the keyboard or mouse.
• Let your upper arms rest naturally on both sides of the chair.
• Ensure that your feet are resting flat on the floor.
• When sitting, ensure that the weight of your legs is on your feet and not on the front portion of your seat. Adjust the height of your chair or use a footrest if necessary to maintain a proper posture.
• Vary your work activities. Try to organize your work so that you do not have to sit and work for extended periods of time. Try to stand or get up and walk around at regular intervals.
• Keep the area under your desk clear of obstructions and cables or power cables that may interfere with comfortable seating or present a potential trip hazard.
Handling and moving your display
To ensure that the monitor is handled safely when lifting or moving it, follow the guidelines that are mentioned below:
• Before moving or lifting the monitor, turn off your computer and the monitor.
• Disconnect all cables from the monitor.
• Place the monitor in the original box with the original packing materials.
• Hold the bottom edge and the side of the monitor firmly without applying excessive pressure when lifting or moving the monitor.
• When lifting or moving the monitor, ensure that the screen is facing away from you. Do not press on the display area to avoid any scratches or damage.
Figure 10. Ensure that the screen is facing away from you
• When transporting the monitor, avoid any sudden shock or vibration to it.
• When lifting or moving the monitor, do not turn the monitor upside down while holding the stand base or stand riser. This may result in accidental damage to the monitor or cause personal injury.
Setting up the monitor
Connecting the stand
CAUTION: The following steps are important to protect your screen. Follow the instructions to complete the installation.
NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the setup instructions that were included with the stand.
1. Remove the stand base and stand riser from the packaging cushion.
NOTE: The images are for the purpose of illustration only. The placement and appearance of the package cushion may vary by model.
2. Align and place the stand riser on the stand base.
3. Open the screw handle at the bottom of the stand base and turn it clockwise to secure the stand assembly.
4. Close the screw handle.
2
3 4
Figure 13. Assemble the stand riser to stand base
5. Open the protective cover on the monitor to access the VESA slot on the monitor.
NOTE: Before attaching the stand assembly to the display, ensure that the front flap is opened to allow space for assembly
6. Attach the stand assembly to the display.
• Fit the two tabs on the upper part of the stand to the groove on the back of the display.
• Press the stand down till it snaps into place.
Figure 15. Attach the stand assembly to the display
7. Hold the stand riser and lift the monitor carefully, then place it on a flat surface.
CAUTION: Lift the monitor carefully to prevent it from slipping or falling.
8. Lift the protective cover from the monitor.
Figure 17. Lift the protective cover from the monitor
Using the tilt and height adjustment
NOTE: The following instructions are applicable only for attaching the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the setup instructions that were included with the stand.
Tilt adjustment
With the stand attached to the monitor, you can tilt the monitor for the most comfortable viewing angle.
Height adjustment
NOTE: The stand extends vertically up to 110 mm. The following image illustrates how to adjust the stand vertically.
Operating the monitor
Power on the monitor
Press the power button to turn on the monitor.
Figure 28. Power on the monitor
Using the joystick control
Use the joystick control at the bottom of the monitor to make On-Screen Display (OSD) adjustments.
Accessing the Menu Launcher
When you move or press the joystick button, the Menu Launcher appears at the bottom center of the screen, allowing you to access the OSD menu and shortcut functions.
To select a function, move the joystick button.
Documents / Resources
 |
ALIENWARE AW3425DWM 34 Gaming Monitor [pdf] Owner's Manual AW3425DWM 34 Gaming Monitor, AW3425DWM, 34 Gaming Monitor, Gaming Monitor, Monitor |