A Hama COMPANY

CODA Touchscreen Interface

Quick Start Guide: Controllers

1. Use a Micro-USB cable to connect power to the display, and wait for the device to initialize. You may see a “device not found” error, which s not a problem at this point.
2. Connect a USB-A to a USB-C cable between the display and the controller or meter.
3. Connect power to the controller via DB-15 cable.

Download the full manual: alicat.com/coda

1. Use a Micro-USB cable to connect power to the display, and wait for the device to initialize. You may see a “device not found” error, which is not a problem at this point.
2. Connect a USB-A to a USB-C cable between the display and the controller or meter.

Troubleshooting

• Questions: +1 520-290-6060
• info@alicat.com
• Live web chat at alicat.com

                                                     DOC-MANUAL-CD-QUICK

Documents / Resources

ALICAT KC-100 CODA Touchscreen Interface [pdf] User Guide KC-100, KC-1K, KC-10K, KC-100 CODA Touchscreen Interface, CODA Touchscreen Interface

References

• User Manual