Alibaba Q2 Multi Mechanical Mini Speakers Portable Wireless Computer
Specifications
- Model: Q2
- FCC Compliance: Part 15
Product Information
The Q2 is a compact and lightweight device designed to comply with FCC Part 15 regulations. It is user-friendly and easy to operate, making it suitable for various applications.
Power On/Off:
- To power on the device, press and hold the power button for 3 seconds. To power off, repeat the same process.
Charging:
- Connect the device to a power source using the provided charging cable. The LED indicator will show the charging status. Once fully charged, disconnect the device from the power source.
Operation:
- Follow the specific operation instructions for your intended use of the device. Refer to the user manual for detailed guidance on
different functions and settings.
PRODUCT ACCESSORIES
- Speaker*1,Chargingline*1,operationmanual*1
PRODUCT SPECIFICATION
FUNCTIONAL DIAGRAM
FUNCTION INSTRUCTIONS
- Power on / off / play / pause / volume + / volume-
- Toggle the key on/togglethe@keyto off to turn off.
- Briefly press the ® key to switch between play and pause.
- Briefly press the button @ to switch between playing and pausing, rotate the button @ clockwise to volume +, and rotate the button@ @ @ counterclockwise to volume-.
Mode switching / wireless connection
- Briefly press the button to switch the playback mode (U disk playback / TF Card playback / wireless playback).
- a. After entering the wireless mode, search with your mobile phone or other devices, and connect the wireless device name with ‘E-3401″. after the pairing is successful, enter the wireless playback mode.
- b. After the device is paired successfully, the next time it enters the wireless mode, it will be automatically connected 10 times, and the connection timeout will enter the pairing
Previous/next
- Knob O key, clockwise rotation is the next song switching, counterclockwise rotation is the previous song switching.
Audio input mode
- You can use the audio cable to insert © audio interface, and then connect to the mobile phone or computer interface to play music.
5 TF card mode
- Insert the TF card into the TF card slot and automatically switch to the card reading mode.
- USB flash disk playback mode
- Insert the USB flash disk into the USB socket and automatically switch to the card reading mode.
Power access
- Connect the USB plug of type-C charging wire to the USB charging port with DC5V, connect the type-C charging head to the DCSV socket on the machine, the red indicator lights up, and the device is in charging state.
- Note: the design and specifications are subject to change without notice.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements.
- The device can be used in portable exposure conditions without restriction
Frequently Asked Questions
Q: How do I know when the device is fully charged?
A: The LED indicator will turn green when the device is fully charged.
Q: Can I use the Q2 for outdoor activities?
A: Yes, the Q2 is suitable for both indoor and outdoor use.
Documents / Resources
 |
Alibaba Q2 Multi Mechanical Mini Speakers Portable Wireless Computer [pdf] User Manual 2BKMS-Q2, 2BKMSQ2, Q2 Multi Mechanical Mini Speakers Portable Wireless Computer, Q2, Multi Mechanical Mini Speakers Portable Wireless Computer, Mini Speakers Portable Wireless Computer, Portable Wireless Computer, Wireless Computer |